From: Osamu Tomita <tomita@cinet.co.jp>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>, LKML <linux-kernel@vger.kernel.org>
Subject: [PATCHSET 2/17] support PC-9800 against 2.5.45-ac1
Date: Thu, 07 Nov 2002 02:35:31 +0900 [thread overview]
Message-ID: <3DC952E3.42B749E5@cinet.co.jp> (raw)
In-Reply-To: 3DC94C7B.79DE5EBC@cinet.co.jp
[-- Attachment #1: Type: text/plain, Size: 173 bytes --]
This is for already merged file, too.
Merged PC-9800 specific "#define"s into floppy98.c.
And don't change include/asm-i386/floppy.h, include/linux/fdreg.h
--
Osamu tomita
[-- Attachment #2: floppy.patch --]
[-- Type: text/plain, Size: 2354 bytes --]
--- linux-2.5.45-ac1/drivers/block/floppy98.c.orig Tue Nov 5 10:16:20 2002
+++ linux-2.5.45-ac1/drivers/block/floppy98.c Wed Nov 6 20:51:58 2002
@@ -176,7 +176,15 @@
#include <linux/fd.h>
+#define FLOPPY98_MOTOR_MASK 0x08
+
+#define FDPATCHES
#include <linux/hdreg.h>
+#define FD98_STATUS (0 + FD_IOPORT )
+#define FD98_DATA (2 + FD_IOPORT )
+#define FD_MODE (4 + FD_IOPORT )
+#define FD_MODE_CHANGE 0xbe
+#define FD_EMODE_CHANGE 0x4be
#include <linux/errno.h>
#include <linux/slab.h>
@@ -784,10 +792,10 @@
fd_outb(newdor, FD_MODE);
}
- if (newdor & FLOPPY_MOTOR_MASK)
+ if (newdor & FLOPPY98_MOTOR_MASK)
floppy_grab_irq_and_dma();
- if (olddor & FLOPPY_MOTOR_MASK)
+ if (olddor & FLOPPY98_MOTOR_MASK)
floppy_release_irq_and_dma();
return olddor;
@@ -828,7 +836,7 @@
if (FDCS->rawcmd == 2)
reset_fdc_info(1);
- if (fd_inb(FD_STATUS) != STATUS_READY)
+ if (fd_inb(FD98_STATUS) != STATUS_READY)
FDCS->reset = 1;
}
@@ -1146,7 +1154,7 @@
if (FDCS->reset)
return -1;
for (counter = 0; counter < READY_DELAY; counter++) {
- status = fd_inb(FD_STATUS);
+ status = fd_inb(FD98_STATUS);
if (status & STATUS_READY)
return status;
}
@@ -1167,7 +1175,7 @@
if ((status = wait_til_ready()) < 0)
return -1;
if ((status & (STATUS_READY|STATUS_DIR|STATUS_DMA)) == STATUS_READY){
- fd_outb(byte,FD_DATA);
+ fd_outb(byte,FD98_DATA);
#ifdef FLOPPY_SANITY_CHECK
output_log[output_log_pos].data = byte;
output_log[output_log_pos].status = status;
@@ -1203,7 +1211,7 @@
return i;
}
if (status == (STATUS_DIR|STATUS_READY|STATUS_BUSY))
- reply_buffer[i] = fd_inb(FD_DATA);
+ reply_buffer[i] = fd_inb(FD98_DATA);
else
break;
}
@@ -1793,7 +1801,7 @@
printk("\n");
#endif
- printk("status=%x\n", fd_inb(FD_STATUS));
+ printk("status=%x\n", fd_inb(FD98_STATUS));
printk("fdc_busy=%lu\n", fdc_busy);
if (do_floppy)
printk("do_floppy=%p\n", do_floppy);
@@ -2344,7 +2352,7 @@
{
if (end_that_request_first(req, uptodate, current_count_sectors))
return;
- add_blkdev_randomness(MAJOR_NR);
+ add_disk_randomness(req->rq_disk);
floppy_off((int)req->rq_disk->private_data);
blkdev_dequeue_request(req);
end_that_request_last(req);
@@ -4251,6 +4259,7 @@
int err;
raw_cmd = NULL;
+ FDC1 = 0x90;
for (i=0; i<N_DRIVE; i++) {
disks[i] = alloc_disk(1);
next prev parent reply other threads:[~2002-11-06 17:29 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-11-06 17:08 [PATCHSET 0/17] support PC-9800 against 2.5.45-ac1 Osamu Tomita
2002-11-06 17:25 ` [PATCHSET 1/17] support PC-9800 against 2.5.45-ac1 (boot) Osamu Tomita
2002-11-06 17:35 ` Osamu Tomita [this message]
2002-11-06 17:40 ` [PATCHSET 3/17] support PC-9800 against 2.5.45-ac1 (core) Osamu Tomita
2002-11-06 17:52 ` [PATCHSET 5/17] support PC-9800 against 2.5.45-ac1 (apm) Osamu Tomita
[not found] ` <1036600885.19924.6.camel@localhost.localdomain>
2002-11-07 15:05 ` Osamu Tomita
2002-11-06 17:59 ` [PATCHSET 4/17] support PC-9800 against 2.5.45-ac1 (console) Osamu Tomita
2002-11-11 17:18 ` Osamu Tomita
2002-11-06 18:06 ` [PATCHSET 6/17] support PC-9800 against 2.5.45-ac1 (network device) Osamu Tomita
2002-11-06 18:19 ` [PATCHSET 7/17] support PC-9800 against 2.5.45-ac1 (FS) Osamu Tomita
2002-11-06 18:22 ` [PATCHSET 8/17] support PC-9800 against 2.5.45-ac1 (IDE) Osamu Tomita
2002-11-06 18:26 ` [PATCHSET 9/17] support PC-9800 against 2.5.45-ac1 (core#2) Osamu Tomita
2002-11-06 18:31 ` [PATCHSET 10/17] support PC-9800 against 2.5.45-ac1 (input) Osamu Tomita
2002-11-08 22:24 ` Osamu Tomita
2002-11-06 18:36 ` [PATCHSET 11/17] support PC-9800 against 2.5.45-ac1 (kernel) Osamu Tomita
2002-11-06 18:42 ` [PATCHSET 12/17] support PC-9800 against 2.5.45-ac1 (parport) Osamu Tomita
2002-11-06 18:48 ` [PATCHSET 13/17] support PC-9800 against 2.5.45-ac1 (PCI) Osamu Tomita
2002-11-06 18:50 ` [PATCHSET 14/17] support PC-9800 against 2.5.45-ac1 (PNP) Osamu Tomita
2002-11-06 18:53 ` [PATCHSET 15/17] support PC-9800 against 2.5.45-ac1 (SCSI) Osamu Tomita
2002-11-06 18:56 ` [PATCHSET 16/17] support PC-9800 against 2.5.45-ac1 (serial) Osamu Tomita
2002-11-06 18:58 ` [PATCHSET 17/17] support PC-9800 against 2.5.45-ac1 (SMP) Osamu Tomita
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3DC952E3.42B749E5@cinet.co.jp \
--to=tomita@cinet.co.jp \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.