From: Luben Tuikov <luben@splentec.com>
To: linux-scsi <linux-scsi@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] scsi: extracting the sense key, ASC and ASCQ
Date: Wed, 13 Nov 2002 16:49:04 -0500 [thread overview]
Message-ID: <3DD2C8D0.803DC1AF@splentec.com> (raw)
In-Reply-To: 3DD2C4D8.4E8B7A7D@splentec.com
Linewrap at 120... DOH!
diff -Nru -X /usr/src/dontdiff linux-2.5.47/drivers/scsi/scsi.c linux/drivers/scsi/scsi.c
--- linux-2.5.47/drivers/scsi/scsi.c Sun Nov 10 22:28:16 2002
+++ linux/drivers/scsi/scsi.c Wed Nov 13 14:00:51 2002
@@ -2257,7 +2257,7 @@
SCpnt->internal_timeout,
SCpnt->cmnd[0],
- SCpnt->sense_buffer[2],
+ get_sense_key(SCpnt->sense_buffer),
SCpnt->result);
}
}
diff -Nru -X /usr/src/dontdiff linux-2.5.47/drivers/scsi/scsi.h linux/drivers/scsi/scsi.h
--- linux-2.5.47/drivers/scsi/scsi.h Sun Nov 10 22:28:06 2002
+++ linux/drivers/scsi/scsi.h Wed Nov 13 13:55:52 2002
@@ -133,6 +133,33 @@
#define sense_error(sense) ((sense) & 0xf)
#define sense_valid(sense) ((sense) & 0x80);
+/* Support for descriptor format sense data.
+ */
+static inline u8 get_sense_key(unsigned char *sense_buf)
+{
+ return (sense_buf[0]&2) ? sense_buf[1]&0xf : sense_buf[2]&0xf;
+}
+
+static inline u8 get_asc(unsigned char *sense_buf)
+{
+ if (sense_buf[0]&2)
+ return sense_buf[2];
+ else if (sense_buf[7]>4)
+ return sense_buf[12];
+ else
+ return 0;
+}
+
+static inline u8 get_ascq(unsigned char *sense_buf)
+{
+ if (sense_buf[0]&2)
+ return sense_buf[3];
+ else if (sense_buf[7]>5)
+ return sense_buf[13];
+ else
+ return 0;
+}
+
#define NEEDS_RETRY 0x2001
#define SUCCESS 0x2002
#define FAILED 0x2003
diff -Nru -X /usr/src/dontdiff linux-2.5.47/drivers/scsi/scsi_error.c linux/drivers/scsi/scsi_error.c
--- linux-2.5.47/drivers/scsi/scsi_error.c Sun Nov 10 22:28:02 2002
+++ linux/drivers/scsi/scsi_error.c Wed Nov 13 14:04:24 2002
@@ -299,13 +299,15 @@
**/
static int scsi_check_sense(Scsi_Cmnd *scmd)
{
+ u8 sense_key = get_sense_key(scmd->sense_buffer);
+ u8 asc = get_asc(scmd->sense_buffer);
+ u8 ascq = get_ascq(scmd->sense_buffer);
+
if (!SCSI_SENSE_VALID(scmd)) {
return FAILED;
}
- if (scmd->sense_buffer[2] & 0xe0)
- return SUCCESS;
- switch (scmd->sense_buffer[2] & 0xf) {
+ switch (sense_key) {
case NO_SENSE:
return SUCCESS;
case RECOVERED_ERROR:
@@ -329,8 +331,7 @@
* if the device is in the process of becoming ready, we
* should retry.
*/
- if ((scmd->sense_buffer[12] == 0x04) &&
- (scmd->sense_buffer[13] == 0x01)) {
+ if (asc == 0x04 && ascq == 0x01) {
return NEEDS_RETRY;
}
return SUCCESS;
diff -Nru -X /usr/src/dontdiff linux-2.5.47/drivers/scsi/scsi_ioctl.c linux/drivers/scsi/scsi_ioctl.c
--- linux-2.5.47/drivers/scsi/scsi_ioctl.c Sun Nov 10 22:28:31 2002
+++ linux/drivers/scsi/scsi_ioctl.c Wed Nov 13 14:06:04 2002
@@ -108,7 +108,7 @@
SCSI_LOG_IOCTL(2, printk("Ioctl returned 0x%x\n", SRpnt->sr_result));
if (driver_byte(SRpnt->sr_result) != 0)
- switch (SRpnt->sr_sense_buffer[2] & 0xf) {
+ switch (get_sense_key(SRpnt->sr_sense_buffer)) {
case ILLEGAL_REQUEST:
if (cmd[0] == ALLOW_MEDIUM_REMOVAL)
dev->lockable = 0;
@@ -134,10 +134,10 @@
dev->id,
dev->lun,
SRpnt->sr_result);
- printk("\tSense class %x, sense error %x, extended sense %x\n",
+ printk("\tSense class %x, sense error %x, sense key %x\n",
sense_class(SRpnt->sr_sense_buffer[0]),
sense_error(SRpnt->sr_sense_buffer[0]),
- SRpnt->sr_sense_buffer[2] & 0xf);
+ get_sense_key(SRpnt->sr_sense_buffer));
}
diff -Nru -X /usr/src/dontdiff linux-2.5.47/drivers/scsi/scsi_lib.c linux/drivers/scsi/scsi_lib.c
--- linux-2.5.47/drivers/scsi/scsi_lib.c Sun Nov 10 22:28:14 2002
+++ linux/drivers/scsi/scsi_lib.c Wed Nov 13 14:14:52 2002
@@ -581,17 +581,17 @@
}
#endif
}
- if ((SCpnt->sense_buffer[0] & 0x7f) == 0x70) {
+ if (SCSI_SENSE_VALID(SCpnt)) {
/*
* If the device is in the process of becoming ready,
* retry.
*/
- if (SCpnt->sense_buffer[12] == 0x04 &&
- SCpnt->sense_buffer[13] == 0x01) {
+ if (get_asc(SCpnt->sense_buffer) == 0x04 &&
+ get_ascq(SCpnt->sense_buffer) == 0x01) {
scsi_queue_next_request(q, SCpnt);
return;
}
- if ((SCpnt->sense_buffer[2] & 0xf) == UNIT_ATTENTION) {
+ if (get_sense_key(SCpnt->sense_buffer) == UNIT_ATTENTION) {
if (SCpnt->device->removable) {
/* detected disc change. set a bit
* and quietly refuse further access.
@@ -618,7 +618,7 @@
* past the end of the disk.
*/
- switch (SCpnt->sense_buffer[2]) {
+ switch (get_sense_key(SCpnt->sense_buffer)) {
case ILLEGAL_REQUEST:
if (SCpnt->device->ten) {
SCpnt->device->ten = 0;
diff -Nru -X /usr/src/dontdiff linux-2.5.47/drivers/scsi/scsi_scan.c linux/drivers/scsi/scsi_scan.c
--- linux-2.5.47/drivers/scsi/scsi_scan.c Sun Nov 10 22:28:29 2002
+++ linux/drivers/scsi/scsi_scan.c Wed Nov 13 14:10:20 2002
@@ -1205,9 +1205,9 @@
if (sreq->sr_result) {
if ((driver_byte(sreq->sr_result) & DRIVER_SENSE) != 0 &&
- (sreq->sr_sense_buffer[2] & 0xf) == UNIT_ATTENTION &&
- sreq->sr_sense_buffer[12] == 0x28 &&
- sreq->sr_sense_buffer[13] == 0) {
+ get_sense_key(sreq->sr_sense_buffer) == UNIT_ATTENTION &&
+ get_asc(sreq->sr_sense_buffer) == 0x28 &&
+ get_ascq(sreq->sr_sense_buffer) == 0) {
/* not-ready to ready transition - good */
/* dpg: bogus? INQUIRY never returns UNIT_ATTENTION */
} else
@@ -1830,7 +1830,7 @@
? "failed" : "successful", retries,
sreq->sr_result));
if (sreq->sr_result == 0
- || sreq->sr_sense_buffer[2] != UNIT_ATTENTION)
+ || get_sense_key(sreq->sr_sense_buffer) != UNIT_ATTENTION)
break;
}
scsi_release_commandblocks(sdevscan);
diff -Nru -X /usr/src/dontdiff linux-2.5.47/drivers/scsi/scsiiom.c linux/drivers/scsi/scsiiom.c
--- linux-2.5.47/drivers/scsi/scsiiom.c Sun Nov 10 22:28:03 2002
+++ linux/drivers/scsi/scsiiom.c Wed Nov 13 14:12:01 2002
@@ -1380,7 +1380,7 @@
pSRB->AdaptStatus = 0;
pSRB->TargetStatus = CHECK_CONDITION << 1;
#ifdef DC390_REMOVABLEDEBUG
- switch (pcmd->sense_buffer[2] & 0x0f)
+ switch (get_sense_key(pcmd->sense_buffer))
{
case NOT_READY: printk (KERN_INFO "DC390: ReqSense: NOT_READY (Cmnd = 0x%02x, Dev = %i-%i, Stat = %i, Scan = %i)\n",
pcmd->cmnd[0], pDCB->TargetID, pDCB->TargetLUN,
@@ -1584,8 +1584,8 @@
else printk ("\n");
#endif
if( (host_byte(pcmd->result) != DID_OK && !(status_byte(pcmd->result) & CHECK_CONDITION) && !(status_byte(pcmd->result) & BUSY)) ||
- ((driver_byte(pcmd->result) & DRIVER_SENSE) && (pcmd->sense_buffer[0] & 0x70) == 0x70 &&
- (pcmd->sense_buffer[2] & 0xf) == ILLEGAL_REQUEST) || host_byte(pcmd->result) & DID_ERROR )
+ ((driver_byte(pcmd->result) & DRIVER_SENSE) && SCSI_SENSE_VALID(pcmd->sense_buffer) &&
+ get_sense_key(pcmd->sense_buffer) == ILLEGAL_REQUEST) || host_byte(pcmd->result) & DID_ERROR )
{
/* device not present: remove */
//dc390_Going_remove (pDCB, pSRB);
prev parent reply other threads:[~2002-11-13 21:49 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-11-13 21:32 [PATCH] scsi: extracting the sense key, ASC and ASCQ Luben Tuikov
2002-11-13 21:49 ` Luben Tuikov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3DD2C8D0.803DC1AF@splentec.com \
--to=luben@splentec.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.