From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3DD8DD24.1080809@motorola.com> Date: Mon, 18 Nov 2002 12:29:24 +0000 From: John Traill MIME-Version: 1.0 To: Michael Habermann Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: linuxppc-2.5 / Sandpoint X2 References: <3DD4E4D3.4030805@motorola.com> <3DD83DB8.5090600@gmx.de> Content-Type: text/plain; charset=us-ascii; format=flowed Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: The existing switch configuration works for a 2.4 kernel. Changing S5 makes no difference. Michael Habermann wrote: > > John Traill wrote: > >> However I'm not sure if this is indicative of an error in the changes >> above or just the fact that the kernel isn't doing >> anything else but service irq's. > > > Check the switch S5, which changes the IRQ polarity. Maybe the interrupt > line is always asserted. > On a 8240 CPU, it needs reversed polarity. > -- Regards, John ___________________________________________________________________________ ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/