From: jorg de jong <jorg@dejong.info>
To: linux-kernel@vger.kernel.org
Subject: status of HPT374 support in 2.4.20 and 2.5.50
Date: Sat, 07 Dec 2002 22:26:10 +0100 [thread overview]
Message-ID: <3DF26772.8040502@dejong.info> (raw)
Hi,
I just bought a Highpoint Rocketraid 404 controler. To my suppirce I
found that
the kernel I was using does not like it one bit. The kernel entered a
kernel panic/BUG
in file hpt666.c:1031. The kernel was a Redhat stock kernel
2.4.18-18.8.0smp.
Not afraid to build my own kernel I tried:
- 2.4.20; which also stoped with a kernel panic.
- 2.4.20-ac1; this kernel boots just fine. It even sees the controller
but does not detect
the drive.
- 2.5.46; sees the controler but no drive
- 2.5.50; sees the controler but no drive
Google told me that there are successes with the HPT374 contoller(kernel
2.5.46),
but thus far not for me.
Some info about by system:
motherboard: msi k7d; dual amd athlon mp 2000+
onboard ide controller: AMD7441
other pci ide controller: PDC20267
Please help,
regards,
Jorg de Jong
part of dmesg (2.4.20-ac1):
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD7441: IDE controller at PCI slot 00:07.1
AMD7441: chipset revision 4
AMD7441: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:DMA, hdd:DMA
HPT374: IDE controller at PCI slot 00:09.0
HPT374: chipset revision 7
HPT374: not 100% native mode: will probe irqs later
PDC20267: IDE controller at PCI slot 02:05.0
PDC20267: chipset revision 2
PDC20267: not 100% native mode: will probe irqs later
PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
ide2: BM-DMA at 0x9000-0x9007, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0x9008-0x900f, BIOS settings: hdg:DMA, hdh:DMA
hda: ST340823A, ATA DISK drive
blk: queue c0399fa0, I/O limit 4095Mb (mask 0xffffffff)
hdc: LITE-ON LTR-48125S, ATAPI CD/DVD-ROM drive
hdd: TOSHIBA DVD-ROM SD-M1212, ATAPI CD/DVD-ROM drive
hde: ST360021A, ATA DISK drive
blk: queue c039a878, I/O limit 4095Mb (mask 0xffffffff)
hdg: ST360021A, ATA DISK drive
hdh: ST360021A, ATA DISK drive
blk: queue c039ace4, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c039ae30, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide2 at 0x8000-0x8007,0x8402 on irq 17
ide3 at 0x8800-0x8807,0x8c02 on irq 17
hda: 78165360 sectors (40021 MB) w/1024KiB Cache, CHS=4865/255/63, UDMA(100)
hde: host protected area => 1
hde: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=116301/16/63,
UDMA(100)
hdg: host protected area => 1
hdg: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=116301/16/63,
UDMA(100)
hdh: host protected area => 1
hdh: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=116301/16/63,
UDMA(100)
next reply other threads:[~2002-12-07 21:18 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-12-07 21:26 jorg de jong [this message]
2002-12-07 21:53 ` status of HPT374 support in 2.4.20 and 2.5.50 Andrew Morton
2002-12-07 22:26 ` Jorg de Jong
2002-12-07 22:49 ` Andrew Morton
2002-12-08 1:29 ` Alan Cox
2002-12-09 14:22 ` jorg de jong
2002-12-09 15:51 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3DF26772.8040502@dejong.info \
--to=jorg@dejong.info \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.