Re: [parisc-linux] new 2.4.20-pa10 kernel: boot pb.

[Bruno Vidal <bruno_vidal@hpfrcu03.france.hp.com>]

[-- Attachment #1: Type: text/plain, Size: 2204 bytes --]

    Hi
Still the same behavior:

sym.0.2.0: setting PCI_COMMAND_MASTER...
sym.0.2.1: setting PCI_COMMAND_MASTER...
sym.0.1.0: setting PCI_COMMAND_MASTER...
sym0: <875> rev 0x14 on pci bus 0 device 2 function 0 irq 130
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: SCSI BUS has been reset.
sym1: <875> rev 0x14 on pci bus 0 device 2 function 1 irq 131
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: SCSI BUS has been reset.
sym2: <896> rev 0x7 on pci bus 0 device 1 function 0 irq 129
sym2: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym2: SCSI BUS has been reset.
sym3: <896> rev 0x7 on pci bus 0 device 1 function 1 irq 130
sym3: No NVRAM, ID 7, Fast-40, SE, parity checking
sym3: SCSI BUS has been reset.
sym3: SCSI BUS mode change from SE to SE.
sym3: SCSI BUS has been reset.
scsi0 : sym-2.1.17a
scsi1 : sym-2.1.17a
scsi2 : sym-2.1.17a
scsi3 : sym-2.1.17a
blk: queue 000000004f9f3e40, I/O limit 4095Mb (mask 0xffffffff)

Nothing more.........
I'll try with spinlock debug now.
Randolph Chung wrote:

> > nothing more, it stay here forever.......
> >
> > It is an A500 in SMP/64.
> >
> > A normal boot with 2.4.19
> > scsi1 : sym53c8xx-1.7.3c-20010512
> > scsi2 : sym53c8xx-1.7.3c-20010512
> > scsi3 : sym53c8xx-1.7.3c-20010512
> >   Vendor: SEAGATE   Model: ST31230N          Rev: HP05
> >   Type:   Direct-Access                      ANSI SCSI revision: 02
> >   Vendor: SEAGATE   Model: ST318404LC        Rev: HP04
>
> Bruno, can you try the sym2 driver and let us know how it goes?
>
> CONFIG_SCSI_SYM53C8XX_2=y
> CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
> CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
> CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
>
> there was a similar problem with the sym2 driver that was fixed
> recently.
>
> alternatively, please try turning on CONFIG_DEBUG_SPINLOCK in your
> kernel and try running the sym53c8xx driver and see if that helps
> identify the problem...
>
> randolph
> --
> Randolph Chung
> Debian GNU/Linux Developer, hppa/ia64 ports
> http://www.tausq.org/

--
        Vidal Bruno, (770-4271)
        SSD-HA Team, HP-UX & LINUX Support
        bruno_vidal@admin.france.hp.com



[-- Attachment #2: Card for Bruno Vidal --]
[-- Type: text/x-vcard, Size: 386 bytes --]

begin:vcard 
n:Bruno;VIDAL
tel;fax:01-69-82-60-14
tel;work:01-69-29-42-71
x-mozilla-html:TRUE
url:www.france.hp.com
org:Solution Center
version:2.1
email;internet:bruno_vidal@hp.com
title:Expert Logiciel Environnement Haute Disponibilité
adr;quoted-printable:;;HP France=0D=0A;Z.A de Courtaboeuf;1 Av. du Canada;91947 Les Ulis cedex;France
x-mozilla-cpt:;26208
fn:VIDAL Bruno
end:vcard