From: Carsten Langgaard <carstenl@mips.com>
To: Ralf Baechle <ralf@linux-mips.org>, linux-mips@linux-mips.org
Subject: Malta board patch
Date: Wed, 11 Dec 2002 09:20:28 +0100 [thread overview]
Message-ID: <3DF6F54C.64858797@mips.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 392 bytes --]
I have attached a patch, with some minor changes for the Malta board.
/Carsten
--
_ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com
|\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527
| \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555
TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556
Denmark http://www.mips.com
[-- Attachment #2: malta.patch --]
[-- Type: text/plain, Size: 4924 bytes --]
Index: arch/mips/mips-boards/generic/memory.c
===================================================================
RCS file: /home/cvs/linux/arch/mips/mips-boards/generic/memory.c,v
retrieving revision 1.6.2.1
diff -u -r1.6.2.1 memory.c
--- arch/mips/mips-boards/generic/memory.c 5 Aug 2002 23:53:34 -0000 1.6.2.1
+++ arch/mips/mips-boards/generic/memory.c 11 Dec 2002 08:11:56 -0000
@@ -168,7 +168,7 @@
+ boot_mem_map.map[i].size) {
ClearPageReserved(virt_to_page(__va(addr)));
set_page_count(virt_to_page(__va(addr)), 1);
- free_page(__va(addr));
+ free_page((unsigned long)__va(addr));
addr += PAGE_SIZE;
freed += PAGE_SIZE;
}
Index: arch/mips/mips-boards/generic/pci.c
===================================================================
RCS file: /home/cvs/linux/arch/mips/mips-boards/generic/pci.c,v
retrieving revision 1.5.2.4
diff -u -r1.5.2.4 pci.c
--- arch/mips/mips-boards/generic/pci.c 28 Sep 2002 18:28:44 -0000 1.5.2.4
+++ arch/mips/mips-boards/generic/pci.c 11 Dec 2002 08:11:56 -0000
@@ -405,6 +405,12 @@
".set\treorder");
irq = *(volatile u32 *)(KSEG1ADDR(BONITO_PCICFG_BASE));
+ __asm__ __volatile__(
+ ".set\tnoreorder\n\t"
+ ".set\tnoat\n\t"
+ "sync\n\t"
+ ".set\tat\n\t"
+ ".set\treorder");
irq &= 0xff;
BONITO_PCIMAP_CFG = 0;
break;
Index: arch/mips/mips-boards/malta/malta_int.c
===================================================================
RCS file: /home/cvs/linux/arch/mips/mips-boards/malta/malta_int.c,v
retrieving revision 1.8.2.6
diff -u -r1.8.2.6 malta_int.c
--- arch/mips/mips-boards/malta/malta_int.c 5 Aug 2002 23:53:34 -0000 1.8.2.6
+++ arch/mips/mips-boards/malta/malta_int.c 11 Dec 2002 08:11:57 -0000
@@ -91,6 +91,9 @@
{
unsigned int data,datahi;
+ /* Mask out corehi interrupt. */
+ clear_c0_status(IE_IRQ3);
+
printk("CoreHI interrupt, shouldn't happen, so we die here!!!\n");
printk("epc : %08lx\nStatus: %08lx\nCause : %08lx\nbadVaddr : %08lx\n"
, regs->cp0_epc, regs->cp0_status, regs->cp0_cause, regs->cp0_badvaddr);
@@ -125,7 +128,6 @@
/* We die here*/
die("CoreHi interrupt", regs);
- while (1) ;
}
void __init init_IRQ(void)
Index: include/asm-mips/mips-boards/malta.h
===================================================================
RCS file: /home/cvs/linux/include/asm-mips/mips-boards/malta.h,v
retrieving revision 1.1.4.2
diff -u -r1.1.4.2 malta.h
--- include/asm-mips/mips-boards/malta.h 5 Aug 2002 23:53:38 -0000 1.1.4.2
+++ include/asm-mips/mips-boards/malta.h 11 Dec 2002 08:12:17 -0000
@@ -32,9 +32,23 @@
* Malta I/O ports base address for the Galileo GT64120 and Algorithmics
* Bonito system controllers.
*/
-#define MALTA_GT_PORT_BASE (KSEG1ADDR(0x18000000))
+#define MALTA_GT_PORT_BASE get_gt_port_base(GT_PCI0IOLD_OFS)
#define MALTA_BONITO_PORT_BASE (KSEG1ADDR(0x1fd00000))
-#define MALTA_MSC_PORT_BASE (KSEG1ADDR(0x18000000))
+#define MALTA_MSC_PORT_BASE get_msc_port_base(MSC01_PCI_SC2PIOBASL)
+
+static inline unsigned long get_gt_port_base(unsigned long reg)
+{
+ unsigned long addr;
+ GT_READ(reg, addr);
+ return KSEG1ADDR((addr & 0xffff) << 21);
+}
+
+static inline unsigned long get_msc_port_base(unsigned long reg)
+{
+ unsigned long addr;
+ MSC_READ(reg, addr);
+ return KSEG1ADDR(addr);
+}
/*
* Malta RTC-device indirect register access.
@@ -58,5 +72,7 @@
#define SMSC_CONFIG_ACTIVATE_ENABLE 1
#define SMSC_WRITE(x,a) outb(x,a)
+
+#define MALTA_JMPRS_REG (KSEG1ADDR(0x1f000210))
#endif /* !(_MIPS_MALTA_H) */
Index: include/asm-mips64/mips-boards/malta.h
===================================================================
RCS file: /home/cvs/linux/include/asm-mips64/mips-boards/malta.h,v
retrieving revision 1.1.2.2
diff -u -r1.1.2.2 malta.h
--- include/asm-mips64/mips-boards/malta.h 5 Aug 2002 23:53:39 -0000 1.1.2.2
+++ include/asm-mips64/mips-boards/malta.h 11 Dec 2002 08:12:18 -0000
@@ -32,9 +32,23 @@
* Malta I/O ports base address for the Galileo GT64120 and Algorithmics
* Bonito system controllers.
*/
-#define MALTA_GT_PORT_BASE (KSEG1ADDR(0x18000000))
+#define MALTA_GT_PORT_BASE get_gt_port_base(GT_PCI0IOLD_OFS)
#define MALTA_BONITO_PORT_BASE (KSEG1ADDR(0x1fd00000))
-#define MALTA_MSC_PORT_BASE (KSEG1ADDR(0x18000000))
+#define MALTA_MSC_PORT_BASE get_msc_port_base(MSC01_PCI_SC2PIOBASL)
+
+static inline unsigned long get_gt_port_base(unsigned long reg)
+{
+ unsigned long addr;
+ GT_READ(reg, addr);
+ return KSEG1ADDR((addr & 0xffff) << 21);
+}
+
+static inline unsigned long get_msc_port_base(unsigned long reg)
+{
+ unsigned long addr;
+ MSC_READ(reg, addr);
+ return KSEG1ADDR(addr);
+}
/*
* Malta RTC-device indirect register access.
@@ -58,5 +72,7 @@
#define SMSC_CONFIG_ACTIVATE_ENABLE 1
#define SMSC_WRITE(x,a) outb(x,a)
+
+#define MALTA_JMPRS_REG (KSEG1ADDR(0x1f000210))
#endif /* !(_MIPS_MALTA_H) */
next reply other threads:[~2002-12-11 8:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-12-11 8:20 Carsten Langgaard [this message]
2002-12-11 17:04 ` Malta board patch Jun Sun
2002-12-11 17:27 ` Maciej W. Rozycki
2002-12-12 7:46 ` Carsten Langgaard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3DF6F54C.64858797@mips.com \
--to=carstenl@mips.com \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.