From: Nicolas ASPERT <Nicolas.Aspert@epfl.ch>
To: Margit Schubert-While <margitsw@t-online.de>
Cc: linux-kernel@vger.kernel.org, davej@suse.de, faith@redhat.com,
dri-devel@lists.sourceforge.net
Subject: Re: 2.4.20 AGP for I845 wrong ?
Date: Wed, 11 Dec 2002 13:07:45 +0100 [thread overview]
Message-ID: <3DF72A91.5080804@epfl.ch> (raw)
In-Reply-To: <fa.jjk71mv.1kja10g@ifi.uio.no>
[-- Attachment #1: Type: text/plain, Size: 912 bytes --]
Margit Schubert-While wrote:
> From drivers/char/agp/agpgart_be.c
> 4554,4559
> { PCI_DEVICE_ID_INTEL_845_G_0,
> PCI_VENDOR_ID_INTEL,
> INTEL_I845_G,
> "Intel",
> "i845G",
> intel_830mp_setup },
>
> Surely this is wrong or ?
> Should be "intel_845_setup", I think.
>
IIRC, the 845G is a "new" version of the 830MP chipset (it had been
added by Abraham vd Merwe & Graeme Fisher some months ago), but acts
basically just as the 830MP. Therefore the entry is correct.... Or maybe
if it gets confusing adding a comment would not hurt...
>
> Also in drivers/char/drm/drm_agpsupport.h, the switch statement at 262
> is missing the
> cases for INTEL_I830_M, INTEL_I845_G.
That's true. It is also missing in 2.5.51.
I attach two patches, one for 2.4.21-pre1 and one for 2.5.51 that should
fix this.
Regards
Nicolas.
[-- Attachment #2: intelchipset-id-2.4.21-pre1.diff --]
[-- Type: text/plain, Size: 848 bytes --]
diff -ru linux-2.4.21-pre1.clean/drivers/char/drm/drm_agpsupport.h linux-2.4.21-pre1/drivers/char/drm/drm_agpsupport.h
--- linux-2.4.21-pre1.clean/drivers/char/drm/drm_agpsupport.h Wed Dec 11 12:36:58 2002
+++ linux-2.4.21-pre1/drivers/char/drm/drm_agpsupport.h Wed Dec 11 12:42:34 2002
@@ -267,8 +267,10 @@
case INTEL_I810: head->chipset = "Intel i810"; break;
case INTEL_I815: head->chipset = "Intel i815"; break;
case INTEL_I820: head->chipset = "Intel i820"; break;
+ case INTEL_I830_M: head->chipset = "Intel i830M"; break;
case INTEL_I840: head->chipset = "Intel i840"; break;
case INTEL_I845: head->chipset = "Intel i845"; break;
+ case INTEL_I845_G: head->chipset = "Intel i845G"; break;
case INTEL_I850: head->chipset = "Intel i850"; break;
case VIA_GENERIC: head->chipset = "VIA"; break;
[-- Attachment #3: intelchipset-id-2.5.51.diff --]
[-- Type: text/plain, Size: 854 bytes --]
diff -ru linux-2.5.51.clean/drivers/char/drm/drm_agpsupport.h linux-2.5.51/drivers/char/drm/drm_agpsupport.h
--- linux-2.5.51.clean/drivers/char/drm/drm_agpsupport.h Tue Dec 10 03:45:39 2002
+++ linux-2.5.51/drivers/char/drm/drm_agpsupport.h Wed Dec 11 12:55:08 2002
@@ -271,10 +271,12 @@
#if LINUX_VERSION_CODE >= 0x02040f /* KERNEL_VERSION(2,4,15) */
case INTEL_I820: head->chipset = "Intel i820"; break;
#endif
+ case INTEL_I830_M: head->chipset = "Intel i830M"; break;
case INTEL_I840: head->chipset = "Intel i840"; break;
#if LINUX_VERSION_CODE >= 0x02040f /* KERNEL_VERSION(2,4,15) */
case INTEL_I845: head->chipset = "Intel i845"; break;
#endif
+ case INTEL_I845: head->chipset = "Intel i845G"; break;
case INTEL_I850: head->chipset = "Intel i850"; break;
case INTEL_460GX: head->chipset = "Intel 460GX"; break;
next parent reply other threads:[~2002-12-11 12:00 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <fa.jjk71mv.1kja10g@ifi.uio.no>
2002-12-11 12:07 ` Nicolas ASPERT [this message]
2002-12-11 12:20 ` 2.4.20 AGP for I845 wrong ? Dave Jones
2002-12-11 12:26 ` Nicolas ASPERT
2002-12-11 12:38 ` [Dri-devel] " Keith Whitwell
2002-12-11 12:45 ` Keith Whitwell
2002-12-11 13:05 ` Dave Jones
2002-12-11 13:40 ` Keith Whitwell
2002-12-12 1:58 ` David Dawes
2002-12-12 8:57 ` Nicolas ASPERT
2002-12-11 12:16 ` Nicolas ASPERT
2002-12-20 15:09 Margit Schubert-While
-- strict thread matches above, loose matches on Subject: below --
2002-12-10 18:42 Margit Schubert-While
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3DF72A91.5080804@epfl.ch \
--to=nicolas.aspert@epfl.ch \
--cc=davej@suse.de \
--cc=dri-devel@lists.sourceforge.net \
--cc=faith@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=margitsw@t-online.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.