All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hans Feldt <Hans.Feldt@uab.ericsson.se>
To: James Don <JDon@spacebridge.com>
Cc: "'linuxppc-embedded@lists.linuxppc.org'"
	<linuxppc-embedded@lists.linuxppc.org>
Subject: Re: ifconfig: SCC1 enet0 not showing up
Date: Wed, 18 Dec 2002 16:27:31 +0100	[thread overview]
Message-ID: <3E0093E3.40507@uab.ericsson.se> (raw)
In-Reply-To: DB0585C9F6F9D411BE8F00D0B7896A4CC05F4E@SNCMAIL


I think you need to set CONFIG_IP_PNP in your config. Or when using
'make xconfig': Networking Options->IP kernel level autoconfiguration=y

/Hans

On 12/18/02 03:56 PM, James Don wrote:
> Hi,
>
> I have a MPC860 FADS based board running kernel 2.4.
>
> My Ethernet is not showing up ... I have compiled in enet support ... fixed
> my port pins ... but when I do ifconfig I see only:
>
> # ifconfig
> lo        Link encap:Local Loopback
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           UP LOOPBACK RUNNING  MTU:16436  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
>
>
> At start my enet scc is configured properly ... I am pretty sure because I
> see:
> ## Transferring control to Linux (at address 00000000) ...
> Linux version 2.4.20-pre8 ...
> Kernel command line: root=/dev/ram rw
> ip=192.168.104.101:192.168.103.151:192.168.104.1:255.255.255.0:BigMoney::off
> ...
> eth0: CPM ENET Version 0.2 on SCC1, 00:22:2e:ff:67:de
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> loop: loaded (max 8 devices)
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> IP: routing cache hash table of 512 buckets, 4Kbytes
> TCP: Hash tables configured (established 1024 bind 1024)
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> RAMDISK: Compressed image found at block 0
> Freeing initrd memory: 1425k freed
> VFS: Mounted root (ext2 filesystem).
> Freeing unused kernel memory: 44k init
> ....
>
> Am I missing some kernel config (see below)?
>
> Jim
>
> #
> # Automatically generated by make menuconfig: don't edit
> #
> # CONFIG_UID16 is not set
> # CONFIG_RWSEM_GENERIC_SPINLOCK is not set
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_HAVE_DEC_LOCK=y
>
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
>
> #
> # Loadable module support
> #
> # CONFIG_MODULES is not set
>
> #
> # Platform support
> #
> CONFIG_PPC=y
> CONFIG_PPC32=y
> # CONFIG_6xx is not set
> # CONFIG_4xx is not set
> # CONFIG_POWER3 is not set
> # CONFIG_POWER4 is not set
> CONFIG_8xx=y
> # CONFIG_PPC_STD_MMU is not set
> CONFIG_SERIAL_CONSOLE=y
> # CONFIG_RPXLITE is not set
> # CONFIG_RPXCLASSIC is not set
> # CONFIG_BSEIP is not set
> CONFIG_FADS=y
> # CONFIG_TQM823L is not set
> # CONFIG_TQM850L is not set
> # CONFIG_TQM855L is not set
> # CONFIG_TQM860L is not set
> # CONFIG_FPS850L is not set
> # CONFIG_TQM860 is not set
> # CONFIG_SPD823TS is not set
> # CONFIG_IVMS8 is not set
> # CONFIG_IVML24 is not set
> # CONFIG_SM850 is not set
> # CONFIG_MBX is not set
> # CONFIG_WINCEPT is not set
> # CONFIG_ALL_PPC is not set
> # CONFIG_SMP is not set
> CONFIG_MATH_EMULATION=y
> CONFIG_EMBEDDEDBOOT=y
>
> #
> # General setup
> #
> # CONFIG_HIGHMEM is not set
> # CONFIG_ISA is not set
> # CONFIG_EISA is not set
> # CONFIG_SBUS is not set
> # CONFIG_MCA is not set
> # CONFIG_PCI_QSPAN is not set
> # CONFIG_PCI is not set
> CONFIG_NET=y
> # CONFIG_SYSCTL is not set
> # CONFIG_SYSVIPC is not set
> # CONFIG_BSD_PROCESS_ACCT is not set
> CONFIG_KCORE_ELF=y
> CONFIG_BINFMT_ELF=y
> CONFIG_KERNEL_ELF=y
> # CONFIG_BINFMT_MISC is not set
> # CONFIG_HOTPLUG is not set
> # CONFIG_PCMCIA is not set
>
> #
> # Parallel port support
> #
> # CONFIG_PARPORT is not set
> # CONFIG_PPC_RTC is not set
> # CONFIG_CMDLINE_BOOL is not set
>
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
>
> #
> # Plug and Play configuration
> #
> # CONFIG_PNP is not set
> # CONFIG_ISAPNP is not set
>
> #
> # Block devices
> #
> # CONFIG_BLK_DEV_FD is not set
> # CONFIG_BLK_DEV_XD is not set
> # CONFIG_PARIDE is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_CISS_SCSI_TAPE is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> CONFIG_BLK_DEV_LOOP=y
> CONFIG_BLK_DEV_NBD=y
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_SIZE=4096
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_BLK_STATS=y
>
> #
> # Multi-device support (RAID and LVM)
> #
> # CONFIG_MD is not set
> # CONFIG_BLK_DEV_MD is not set
> # CONFIG_MD_LINEAR is not set
> # CONFIG_MD_RAID0 is not set
> # CONFIG_MD_RAID1 is not set
> # CONFIG_MD_RAID5 is not set
> # CONFIG_MD_MULTIPATH is not set
> # CONFIG_BLK_DEV_LVM is not set
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> # CONFIG_PACKET_MMAP is not set
> # CONFIG_NETLINK_DEV is not set
> # CONFIG_NETFILTER is not set
> # CONFIG_FILTER is not set
> CONFIG_UNIX=y
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> # CONFIG_IP_ADVANCED_ROUTER is not set
> # CONFIG_IP_PNP is not set
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> # CONFIG_IP_MROUTE is not set
> # CONFIG_ARPD is not set
> # CONFIG_INET_ECN is not set
> # CONFIG_SYN_COOKIES is not set
> # CONFIG_IPV6 is not set
> # CONFIG_KHTTPD is not set
> # CONFIG_ATM is not set
> # CONFIG_VLAN_8021Q is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
>
> #
> # Appletalk devices
> #
> # CONFIG_DEV_APPLETALK is not set
> # CONFIG_DECNET is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_LLC is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_FASTROUTE is not set
> # CONFIG_NET_HW_FLOWCONTROL is not set
>
> #
> # QoS and/or fair queueing
> #
> # CONFIG_NET_SCHED is not set
>
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
>
> #
> # ATA/IDE/MFM/RLL support
> #
> # CONFIG_IDE is not set
> # CONFIG_BLK_DEV_IDE_MODES is not set
> # CONFIG_BLK_DEV_HD is not set
>
> #
> # SCSI support
> #
> # CONFIG_SCSI is not set
>
> #
> # Network device support
> #
> CONFIG_NETDEVICES=y
>
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
> # CONFIG_DUMMY is not set
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> # CONFIG_ETHERTAP is not set
>
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> # CONFIG_MACE is not set
> # CONFIG_BMAC is not set
> # CONFIG_GMAC is not set
> # CONFIG_SUNLANCE is not set
> # CONFIG_SUNBMAC is not set
> # CONFIG_SUNQE is not set
> # CONFIG_SUNGEM is not set
> # CONFIG_NET_VENDOR_3COM is not set
> # CONFIG_LANCE is not set
> # CONFIG_NET_VENDOR_SMC is not set
> # CONFIG_NET_VENDOR_RACAL is not set
> # CONFIG_NET_ISA is not set
> # CONFIG_NET_PCI is not set
> # CONFIG_NET_POCKET is not set
>
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> # CONFIG_E1000 is not set
> # CONFIG_MYRI_SBUS is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_TIGON3 is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PLIP is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
>
> #
> # Wireless LAN (non-hamradio)
> #
> CONFIG_NET_RADIO=y
> # CONFIG_STRIP is not set
> # CONFIG_WAVELAN is not set
> # CONFIG_ARLAN is not set
> # CONFIG_AIRONET4500 is not set
> # CONFIG_AIRONET4500_NONCS is not set
> # CONFIG_AIRONET4500_PROC is not set
> CONFIG_HERMES=y
> # CONFIG_NET_WIRELESS is not set
>
> #
> # Token Ring devices
> #
> # CONFIG_TR is not set
> # CONFIG_NET_FC is not set
> # CONFIG_RCPCI is not set
> # CONFIG_SHAPER is not set
>
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
>
> #
> # Amateur Radio support
> #
> # CONFIG_HAMRADIO is not set
>
> #
> # IrDA (infrared) support
> #
> # CONFIG_IRDA is not set
>
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN is not set
>
> #
> # Old CD-ROM drivers (not SCSI, not IDE)
> #
> # CONFIG_CD_NO_IDESCSI is not set
>
> #
> # Console drivers
> #
>
> #
> # Frame-buffer support
> #
> # CONFIG_FB is not set
>
> #
> # Input core support
> #
> # CONFIG_INPUT is not set
> # CONFIG_INPUT_KEYBDEV is not set
> # CONFIG_INPUT_MOUSEDEV is not set
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_EVDEV is not set
>
> #
> # Macintosh device drivers
> #
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> # CONFIG_SERIAL is not set
> # CONFIG_SERIAL_EXTENDED is not set
> # CONFIG_SERIAL_NONSTANDARD is not set
> CONFIG_UNIX98_PTYS=y
> CONFIG_UNIX98_PTY_COUNT=256
>
> #
> # I2C support
> #
> CONFIG_I2C=y
> # CONFIG_I2C_ALGOBIT is not set
> # CONFIG_I2C_ALGOPCF is not set
> # CONFIG_I2C_ALGO8XX is not set
> CONFIG_I2C_CHARDEV=y
> CONFIG_I2C_PROC=y
>
> #
> # Mice
> #
> # CONFIG_BUSMOUSE is not set
> # CONFIG_MOUSE is not set
>
> #
> # Joysticks
> #
> # CONFIG_INPUT_GAMEPORT is not set
> # CONFIG_QIC02_TAPE is not set
>
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> # CONFIG_NVRAM is not set
> # CONFIG_RTC is not set
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
>
> #
> # Ftape, the floppy tape device driver
> #
> # CONFIG_FTAPE is not set
> # CONFIG_AGP is not set
> # CONFIG_DRM is not set
>
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
>
> #
> # File systems
> #
> # CONFIG_QUOTA is not set
> # CONFIG_AUTOFS_FS is not set
> # CONFIG_AUTOFS4_FS is not set
> # CONFIG_REISERFS_FS is not set
> # CONFIG_REISERFS_CHECK is not set
> # CONFIG_REISERFS_PROC_INFO is not set
> # CONFIG_ADFS_FS is not set
> # CONFIG_ADFS_FS_RW is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BEFS_DEBUG is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EXT3_FS is not set
> # CONFIG_JBD is not set
> # CONFIG_JBD_DEBUG is not set
> # CONFIG_FAT_FS is not set
> # CONFIG_MSDOS_FS is not set
> # CONFIG_UMSDOS_FS is not set
> # CONFIG_VFAT_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_JFFS_FS is not set
> # CONFIG_JFFS2_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_TMPFS is not set
> CONFIG_RAMFS=y
> # CONFIG_ISO9660_FS is not set
> # CONFIG_JOLIET is not set
> # CONFIG_ZISOFS is not set
> # CONFIG_JFS_FS is not set
> # CONFIG_JFS_DEBUG is not set
> # CONFIG_JFS_STATISTICS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_NTFS_FS is not set
> # CONFIG_NTFS_RW is not set
> # CONFIG_HPFS_FS is not set
> CONFIG_PROC_FS=y
> # CONFIG_DEVFS_FS is not set
> # CONFIG_DEVFS_MOUNT is not set
> # CONFIG_DEVFS_DEBUG is not set
> # CONFIG_DEVPTS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_QNX4FS_RW is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_EXT2_FS=y
> # CONFIG_SYSV_FS is not set
> # CONFIG_UDF_FS is not set
> # CONFIG_UDF_RW is not set
> # CONFIG_UFS_FS is not set
> # CONFIG_UFS_FS_WRITE is not set
>
> #
> # Network File Systems
> #
> # CONFIG_CODA_FS is not set
> # CONFIG_INTERMEZZO_FS is not set
> CONFIG_NFS_FS=y
> # CONFIG_NFS_V3 is not set
> # CONFIG_ROOT_NFS is not set
> CONFIG_NFSD=y
> # CONFIG_NFSD_V3 is not set
> # CONFIG_NFSD_TCP is not set
> CONFIG_SUNRPC=y
> CONFIG_LOCKD=y
> # CONFIG_SMB_FS is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_NCPFS_PACKET_SIGNING is not set
> # CONFIG_NCPFS_IOCTL_LOCKING is not set
> # CONFIG_NCPFS_STRONG is not set
> # CONFIG_NCPFS_NFS_NS is not set
> # CONFIG_NCPFS_OS2_NS is not set
> # CONFIG_NCPFS_SMALLDOS is not set
> # CONFIG_NCPFS_NLS is not set
> # CONFIG_NCPFS_EXTRAS is not set
> # CONFIG_ZISOFS_FS is not set
>
> #
> # Partition Types
> #
> CONFIG_PARTITION_ADVANCED=y
> # CONFIG_ACORN_PARTITION is not set
> # CONFIG_OSF_PARTITION is not set
> # CONFIG_AMIGA_PARTITION is not set
> # CONFIG_ATARI_PARTITION is not set
> CONFIG_MAC_PARTITION=y
> CONFIG_MSDOS_PARTITION=y
> # CONFIG_BSD_DISKLABEL is not set
> # CONFIG_MINIX_SUBPARTITION is not set
> # CONFIG_SOLARIS_X86_PARTITION is not set
> # CONFIG_UNIXWARE_DISKLABEL is not set
> # CONFIG_LDM_PARTITION is not set
> # CONFIG_SGI_PARTITION is not set
> # CONFIG_ULTRIX_PARTITION is not set
> # CONFIG_SUN_PARTITION is not set
> # CONFIG_EFI_PARTITION is not set
> # CONFIG_SMB_NLS is not set
> # CONFIG_NLS is not set
>
> #
> # Sound
> #
> # CONFIG_SOUND is not set
>
> #
> # MPC8xx CPM Options
> #
> CONFIG_SCC_ENET=y
> CONFIG_SCC1_ENET=y
> # CONFIG_SCC2_ENET is not set
> # CONFIG_SCC3_ENET is not set
> # CONFIG_FEC_ENET is not set
> # CONFIG_ENET_BIG_BUFFERS is not set
> # CONFIG_SMC2_UART is not set
> # CONFIG_USE_SCC_IO is not set
> # CONFIG_8xx_COPYBACK is not set
> # CONFIG_8xx_CPU6 is not set
> # CONFIG_UCODE_PATCH is not set
>
> #
> # USB support
> #
> # CONFIG_USB is not set
>
> #
> # Bluetooth support
> #
> # CONFIG_BLUEZ is not set
>
> #
> # Library routines
> #
> CONFIG_ZLIB_INFLATE=y
> CONFIG_ZLIB_DEFLATE=y
>
> #
> # Kernel hacking
> #
> # CONFIG_DEBUG_KERNEL is not set
>
>
>


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

  parent reply	other threads:[~2002-12-18 15:27 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-12-18 14:56 ifconfig: SCC1 enet0 not showing up James Don
2002-12-18 15:08 ` Allen Curtis
2002-12-18 15:19 ` Leonardo Pereira Santos
2002-12-18 15:27 ` Hans Feldt [this message]
2002-12-18 16:43 ` Wolfgang Denk
     [not found] <200212181320.30854.scop@digitel.com.br>
2002-12-18 15:24 ` Allen Curtis
  -- strict thread matches above, loose matches on Subject: below --
2002-12-18 16:25 James Don

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3E0093E3.40507@uab.ericsson.se \
    --to=hans.feldt@uab.ericsson.se \
    --cc=JDon@spacebridge.com \
    --cc=linuxppc-embedded@lists.linuxppc.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.