All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrew Walrond <andrew@walrond.org>
To: Paul Rolland <rol@as2917.net>
Cc: linux-kernel@vger.kernel.org
Subject: Re: [2.5.53] So sloowwwww......
Date: Sun, 29 Dec 2002 16:56:52 +0000	[thread overview]
Message-ID: <3E0F2954.1040502@walrond.org> (raw)
In-Reply-To: 00b701c2af4f$14ea1ec0$2101a8c0@witbe

Ouch; that is slow. What partition type are you building from ?

Paul Rolland wrote:
> Hello,
> 
> I'm just playing a little bit with Kernel 2.5.53, and I've been 
> afraid of finding it quite slow...
> 
> Well, no real way to estimate how much, so I've decided to do the
> following :
> make clean
> time make bzImage
> 
> Of course, there is only one user, no one else is logged on the machine,
> and nothing is running.
> 
> Results are :
> real   109m19.321s
> user   104m26.119s
> sys    3m52.936s
> 
> Of course, this is little value if not possible to compare, so here
> is the same done running a kernel 2.4.20, but still compiling the 
> same kernel :
> time make bzImage
> ...
> Kernel: arch/i386/boot/bzImage is ready
> 
> real    7m29.133s
> user    5m23.660s
> sys     0m19.080s
> 
> Hardware is the same for both, and as far as I know, I have no kernel
> debug enabled when running 2.5.53.
> Here is a copy of the .config file :
> [/usr/src/linux]# cat .config
> #
> # Automatically generated make config: don't edit
> #
> CONFIG_X86=y
> CONFIG_MMU=y
> CONFIG_SWAP=y
> CONFIG_UID16=y
> CONFIG_GENERIC_ISA_DMA=y
> 
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
> 
> #
> # General setup
> #
> CONFIG_NET=y
> CONFIG_SYSVIPC=y
> # CONFIG_BSD_PROCESS_ACCT is not set
> CONFIG_SYSCTL=y
> 
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODULE_UNLOAD=y
> # CONFIG_MODULE_FORCE_UNLOAD is not set
> CONFIG_OBSOLETE_MODPARM=y
> CONFIG_KMOD=y
> 
> #
> # Processor type and features
> #
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMIII is not set
> CONFIG_MPENTIUM4=y
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> # CONFIG_MELAN is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP2 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MCYRIXIII is not set
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_XADD=y
> CONFIG_X86_L1_CACHE_SHIFT=7
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> CONFIG_X86_TSC=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_X86_INTEL_USERCOPY=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> # CONFIG_HUGETLB_PAGE is not set
> # CONFIG_SMP is not set
> # CONFIG_PREEMPT is not set
> CONFIG_X86_UP_APIC=y
> CONFIG_X86_UP_IOAPIC=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_MCE=y
> CONFIG_X86_MCE_NONFATAL=y
> CONFIG_X86_MCE_P4THERMAL=y
> # CONFIG_TOSHIBA is not set
> # CONFIG_I8K is not set
> CONFIG_MICROCODE=y
> CONFIG_X86_MSR=y
> CONFIG_X86_CPUID=y
> # CONFIG_EDD is not set
> CONFIG_NOHIGHMEM=y
> # CONFIG_HIGHMEM4G is not set
> # CONFIG_HIGHMEM64G is not set
> # CONFIG_MATH_EMULATION is not set
> CONFIG_MTRR=y
> 
> #
> # Power management options (ACPI, APM)
> #
> CONFIG_PM=y
> # CONFIG_SOFTWARE_SUSPEND is not set
> 
> #
> # ACPI Support
> #
> CONFIG_ACPI=y
> # CONFIG_ACPI_HT_ONLY is not set
> CONFIG_ACPI_BOOT=y
> CONFIG_ACPI_AC=y
> # CONFIG_ACPI_BATTERY is not set
> CONFIG_ACPI_BUTTON=y
> CONFIG_ACPI_FAN=y
> CONFIG_ACPI_PROCESSOR=y
> # CONFIG_ACPI_THERMAL is not set
> # CONFIG_ACPI_TOSHIBA is not set
> # CONFIG_ACPI_DEBUG is not set
> CONFIG_ACPI_BUS=y
> CONFIG_ACPI_INTERPRETER=y
> CONFIG_ACPI_EC=y
> CONFIG_ACPI_POWER=y
> CONFIG_ACPI_PCI=y
> CONFIG_ACPI_SYSTEM=y
> # CONFIG_APM is not set
> # CONFIG_CPU_FREQ is not set
> 
> #
> # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
> #
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GODIRECT is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> # CONFIG_SCx200 is not set
> CONFIG_PCI_NAMES=y
> # CONFIG_ISA is not set
> # CONFIG_MCA is not set
> # CONFIG_HOTPLUG is not set
> 
> #
> # Executable file formats
> #
> CONFIG_KCORE_ELF=y
> # CONFIG_KCORE_AOUT is not set
> CONFIG_BINFMT_AOUT=y
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_MISC=y
> 
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
> 
> #
> # Parallel port support
> #
> CONFIG_PARPORT=y
> CONFIG_PARPORT_PC=y
> CONFIG_PARPORT_PC_CML1=y
> # CONFIG_PARPORT_SERIAL is not set
> CONFIG_PARPORT_PC_FIFO=y
> # CONFIG_PARPORT_PC_SUPERIO is not set
> # CONFIG_PARPORT_OTHER is not set
> CONFIG_PARPORT_1284=y
> 
> #
> # Plug and Play support
> #
> CONFIG_PNP=y
> CONFIG_PNP_NAMES=y
> # CONFIG_PNP_CARD is not set
> # CONFIG_PNP_DEBUG is not set
> 
> #
> # Protocols
> #
> # CONFIG_PNPBIOS is not set
> 
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=y
> # CONFIG_PARIDE is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> CONFIG_BLK_DEV_LOOP=y
> CONFIG_BLK_DEV_NBD=y
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_SIZE=4096
> CONFIG_BLK_DEV_INITRD=y
> # CONFIG_LBD is not set
> 
> #
> # ATA/ATAPI/MFM/RLL device support
> #
> CONFIG_IDE=y
> 
> #
> # IDE, ATA and ATAPI Block devices
> #
> CONFIG_BLK_DEV_IDE=y
> 
> #
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_HD_IDE is not set
> # CONFIG_BLK_DEV_HD is not set
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> # CONFIG_IDEDISK_STROKE is not set
> CONFIG_BLK_DEV_IDECD=y
> CONFIG_BLK_DEV_IDEFLOPPY=y
> # CONFIG_BLK_DEV_IDESCSI is not set
> CONFIG_IDE_TASK_IOCTL=y
> 
> #
> # IDE chipset support/bugfixes
> #
> # CONFIG_BLK_DEV_CMD640 is not set
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_BLK_DEV_GENERIC=y
> CONFIG_IDEPCI_SHARE_IRQ=y
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_IDE_TCQ is not set
> # CONFIG_BLK_DEV_OFFBOARD is not set
> # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
> CONFIG_IDEDMA_PCI_AUTO=y
> # CONFIG_IDEDMA_ONLYDISK is not set
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_IDEDMA_PCI_WIP is not set
> CONFIG_BLK_DEV_ADMA=y
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> # CONFIG_BLK_DEV_AMD74XX is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5520 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> # CONFIG_BLK_DEV_SC1200 is not set
> CONFIG_BLK_DEV_PIIX=y
> # CONFIG_BLK_DEV_NFORCE is not set
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_OPTI621 is not set
> # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> # CONFIG_BLK_DEV_PDC202XX_NEW is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> # CONFIG_BLK_DEV_SVWKS is not set
> # CONFIG_BLK_DEV_SIIMAGE is not set
> CONFIG_BLK_DEV_SIS5513=y
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> # CONFIG_BLK_DEV_VIA82CXXX is not set
> CONFIG_IDEDMA_AUTO=y
> # CONFIG_IDEDMA_IVB is not set
> CONFIG_BLK_DEV_IDE_MODES=y
> 
> #
> # SCSI device support
> #
> CONFIG_SCSI=y
> 
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=y
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> CONFIG_BLK_DEV_SR=y
> CONFIG_BLK_DEV_SR_VENDOR=y
> CONFIG_CHR_DEV_SG=y
> 
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> CONFIG_SCSI_MULTI_LUN=y
> CONFIG_SCSI_REPORT_LUNS=y
> CONFIG_SCSI_CONSTANTS=y
> # CONFIG_SCSI_LOGGING is not set
> 
> #
> # SCSI low-level drivers
> #
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AACRAID is not set
> CONFIG_SCSI_AIC7XXX=y
> CONFIG_AIC7XXX_CMDS_PER_DEVICE=64
> CONFIG_AIC7XXX_RESET_DELAY_MS=2000
> # CONFIG_AIC7XXX_PROBE_EISA_VL is not set
> # CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
> # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
> CONFIG_AIC7XXX_DEBUG_MASK=0
> CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
> # CONFIG_SCSI_AIC7XXX_OLD is not set
> # CONFIG_SCSI_AIC79XX is not set
> # CONFIG_SCSI_DPT_I2O is not set
> # CONFIG_SCSI_ADVANSYS is not set
> # CONFIG_SCSI_IN2000 is not set
> # CONFIG_SCSI_AM53C974 is not set
> # CONFIG_SCSI_MEGARAID is not set
> CONFIG_SCSI_BUSLOGIC=y
> # CONFIG_SCSI_OMIT_FLASHPOINT is not set
> # CONFIG_SCSI_CPQFCTS is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_EATA_DMA is not set
> # CONFIG_SCSI_EATA_PIO is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_GENERIC_NCR5380 is not set
> # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INITIO is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_PPA is not set
> # CONFIG_SCSI_IMM is not set
> # CONFIG_SCSI_NCR53C7xx is not set
> # CONFIG_SCSI_SYM53C8XX_2 is not set
> # CONFIG_SCSI_NCR53C8XX is not set
> # CONFIG_SCSI_SYM53C8XX is not set
> # CONFIG_SCSI_PCI2000 is not set
> # CONFIG_SCSI_PCI2220I is not set
> # CONFIG_SCSI_QLOGIC_ISP is not set
> # CONFIG_SCSI_QLOGIC_FC is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_U14_34F is not set
> # CONFIG_SCSI_NSP32 is not set
> # CONFIG_SCSI_DEBUG is not set
> 
> #
> # Multi-device support (RAID and LVM)
> #
> # CONFIG_MD is not set
> 
> #
> # Fusion MPT device support
> #
> # CONFIG_FUSION is not set
> 
> #
> # IEEE 1394 (FireWire) support (EXPERIMENTAL)
> #
> # CONFIG_IEEE1394 is not set
> 
> #
> # I2O device support
> #
> # CONFIG_I2O is not set
> 
> #
> # Networking options
> #
> CONFIG_PACKET=y
> # CONFIG_PACKET_MMAP is not set
> CONFIG_NETLINK_DEV=y
> CONFIG_NETFILTER=y
> # CONFIG_NETFILTER_DEBUG is not set
> CONFIG_FILTER=y
> CONFIG_UNIX=y
> CONFIG_NET_KEY=y
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> CONFIG_IP_ADVANCED_ROUTER=y
> CONFIG_IP_MULTIPLE_TABLES=y
> CONFIG_IP_ROUTE_FWMARK=y
> CONFIG_IP_ROUTE_NAT=y
> # CONFIG_IP_ROUTE_MULTIPATH is not set
> # CONFIG_IP_ROUTE_TOS is not set
> CONFIG_IP_ROUTE_VERBOSE=y
> # CONFIG_IP_ROUTE_LARGE_TABLES is not set
> # CONFIG_IP_PNP is not set
> CONFIG_NET_IPIP=y
> CONFIG_NET_IPGRE=y
> # CONFIG_NET_IPGRE_BROADCAST is not set
> # CONFIG_IP_MROUTE is not set
> # CONFIG_ARPD is not set
> CONFIG_INET_ECN=y
> CONFIG_SYN_COOKIES=y
> CONFIG_INET_AH=y
> CONFIG_INET_ESP=y
> CONFIG_XFRM_USER=y
> 
> #
> # IP: Netfilter Configuration
> #
> # CONFIG_IP_NF_CONNTRACK is not set
> # CONFIG_IP_NF_QUEUE is not set
> CONFIG_IP_NF_IPTABLES=y
> CONFIG_IP_NF_MATCH_LIMIT=y
> CONFIG_IP_NF_MATCH_MAC=y
> # CONFIG_IP_NF_MATCH_PKTTYPE is not set
> CONFIG_IP_NF_MATCH_MARK=y
> CONFIG_IP_NF_MATCH_MULTIPORT=y
> # CONFIG_IP_NF_MATCH_TOS is not set
> # CONFIG_IP_NF_MATCH_ECN is not set
> # CONFIG_IP_NF_MATCH_DSCP is not set
> # CONFIG_IP_NF_MATCH_AH_ESP is not set
> CONFIG_IP_NF_MATCH_LENGTH=y
> # CONFIG_IP_NF_MATCH_TTL is not set
> # CONFIG_IP_NF_MATCH_TCPMSS is not set
> # CONFIG_IP_NF_MATCH_UNCLEAN is not set
> # CONFIG_IP_NF_MATCH_OWNER is not set
> CONFIG_IP_NF_FILTER=y
> CONFIG_IP_NF_TARGET_REJECT=y
> # CONFIG_IP_NF_TARGET_MIRROR is not set
> CONFIG_IP_NF_MANGLE=y
> # CONFIG_IP_NF_TARGET_TOS is not set
> # CONFIG_IP_NF_TARGET_ECN is not set
> # CONFIG_IP_NF_TARGET_DSCP is not set
> CONFIG_IP_NF_TARGET_MARK=y
> CONFIG_IP_NF_TARGET_LOG=y
> # CONFIG_IP_NF_TARGET_ULOG is not set
> # CONFIG_IP_NF_TARGET_TCPMSS is not set
> # CONFIG_IP_NF_ARPTABLES is not set
> CONFIG_IPV6=y
> 
> #
> # IPv6: Netfilter Configuration
> #
> # CONFIG_IP6_NF_QUEUE is not set
> # CONFIG_IP6_NF_IPTABLES is not set
> 
> #
> # SCTP Configuration (EXPERIMENTAL)
> #
> CONFIG_IPV6_SCTP__=y
> # CONFIG_IP_SCTP is not set
> # CONFIG_ATM is not set
> # CONFIG_VLAN_8021Q is not set
> # CONFIG_LLC is not set
> # CONFIG_DECNET is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_FASTROUTE is not set
> # CONFIG_NET_HW_FLOWCONTROL is not set
> 
> #
> # QoS and/or fair queueing
> #
> # CONFIG_NET_SCHED is not set
> 
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> 
> #
> # Network device support
> #
> CONFIG_NETDEVICES=y
> 
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
> CONFIG_DUMMY=y
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> CONFIG_TUN=y
> # CONFIG_ETHERTAP is not set
> 
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> CONFIG_NET_VENDOR_3COM=y
> CONFIG_VORTEX=y
> # CONFIG_NET_VENDOR_SMC is not set
> # CONFIG_NET_VENDOR_RACAL is not set
> 
> #
> # Tulip family network device support
> #
> # CONFIG_NET_TULIP is not set
> # CONFIG_HP100 is not set
> CONFIG_NET_PCI=y
> CONFIG_PCNET32=y
> # CONFIG_ADAPTEC_STARFIRE is not set
> # CONFIG_B44 is not set
> # CONFIG_DGRS is not set
> # CONFIG_EEPRO100 is not set
> # CONFIG_E100 is not set
> # CONFIG_FEALNX is not set
> # CONFIG_NATSEMI is not set
> # CONFIG_NE2K_PCI is not set
> # CONFIG_8139CP is not set
> # CONFIG_8139TOO is not set
> # CONFIG_SIS900 is not set
> # CONFIG_EPIC100 is not set
> # CONFIG_SUNDANCE is not set
> # CONFIG_TLAN is not set
> # CONFIG_VIA_RHINE is not set
> # CONFIG_NET_POCKET is not set
> 
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> # CONFIG_E1000 is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_R8169 is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_TIGON3 is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PLIP is not set
> CONFIG_PPP=y
> # CONFIG_PPP_MULTILINK is not set
> CONFIG_PPP_FILTER=y
> CONFIG_PPP_ASYNC=y
> CONFIG_PPP_SYNC_TTY=y
> CONFIG_PPP_DEFLATE=y
> CONFIG_PPP_BSDCOMP=y
> # CONFIG_PPPOE is not set
> # CONFIG_SLIP is not set
> 
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
> 
> #
> # Token Ring devices (depends on LLC=y)
> #
> # CONFIG_NET_FC is not set
> # CONFIG_RCPCI is not set
> # CONFIG_SHAPER is not set
> 
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
> 
> #
> # Amateur Radio support
> #
> # CONFIG_HAMRADIO is not set
> 
> #
> # IrDA (infrared) support
> #
> # CONFIG_IRDA is not set
> 
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN_BOOL is not set
> 
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
> 
> #
> # Input device support
> #
> CONFIG_INPUT=y
> 
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_TSDEV is not set
> # CONFIG_INPUT_EVDEV is not set
> # CONFIG_INPUT_EVBUG is not set
> 
> #
> # Input I/O drivers
> #
> # CONFIG_GAMEPORT is not set
> CONFIG_SOUND_GAMEPORT=y
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> # CONFIG_SERIO_SERPORT is not set
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PARKBD is not set
> 
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> # CONFIG_MOUSE_SERIAL is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> # CONFIG_INPUT_MISC is not set
> 
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_SERIAL_NONSTANDARD is not set
> 
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> # CONFIG_SERIAL_8250_EXTENDED is not set
> 
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> CONFIG_UNIX98_PTYS=y
> CONFIG_UNIX98_PTY_COUNT=256
> CONFIG_PRINTER=y
> # CONFIG_LP_CONSOLE is not set
> # CONFIG_PPDEV is not set
> # CONFIG_TIPAR is not set
> 
> #
> # I2C support
> #
> # CONFIG_I2C is not set
> 
> #
> # Mice
> #
> # CONFIG_BUSMOUSE is not set
> # CONFIG_QIC02_TAPE is not set
> 
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> CONFIG_INTEL_RNG=y
> # CONFIG_AMD_RNG is not set
> CONFIG_NVRAM=y
> CONFIG_RTC=y
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_SONYPI is not set
> 
> #
> # Ftape, the floppy tape device driver
> #
> # CONFIG_FTAPE is not set
> CONFIG_AGP=y
> # CONFIG_AGP3 is not set
> CONFIG_AGP_INTEL=y
> CONFIG_AGP_VIA=y
> # CONFIG_AGP_AMD is not set
> CONFIG_AGP_SIS=y
> # CONFIG_AGP_ALI is not set
> # CONFIG_AGP_SWORKS is not set
> # CONFIG_AGP_AMD_8151 is not set
> CONFIG_DRM=y
> # CONFIG_DRM_TDFX is not set
> # CONFIG_DRM_R128 is not set
> CONFIG_DRM_RADEON=y
> # CONFIG_DRM_I810 is not set
> # CONFIG_DRM_I830 is not set
> # CONFIG_DRM_MGA is not set
> # CONFIG_MWAVE is not set
> # CONFIG_RAW_DRIVER is not set
> 
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
> 
> #
> # File systems
> #
> CONFIG_QUOTA=y
> # CONFIG_QFMT_V1 is not set
> CONFIG_QFMT_V2=y
> CONFIG_QUOTACTL=y
> # CONFIG_AUTOFS_FS is not set
> CONFIG_AUTOFS4_FS=y
> CONFIG_REISERFS_FS=y
> # CONFIG_REISERFS_CHECK is not set
> CONFIG_REISERFS_PROC_INFO=y
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> CONFIG_EXT3_FS=y
> CONFIG_EXT3_FS_XATTR=y
> # CONFIG_EXT3_FS_POSIX_ACL is not set
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FAT_FS=y
> CONFIG_MSDOS_FS=y
> CONFIG_VFAT_FS=y
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> CONFIG_TMPFS=y
> CONFIG_RAMFS=y
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> CONFIG_ZISOFS=y
> # CONFIG_JFS_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_VXFS_FS is not set
> CONFIG_NTFS_FS=y
> # CONFIG_NTFS_DEBUG is not set
> # CONFIG_NTFS_RW is not set
> # CONFIG_HPFS_FS is not set
> CONFIG_PROC_FS=y
> # CONFIG_DEVFS_FS is not set
> CONFIG_DEVPTS_FS=y
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_EXT2_FS=y
> # CONFIG_EXT2_FS_XATTR is not set
> # CONFIG_SYSV_FS is not set
> CONFIG_UDF_FS=y
> # CONFIG_UFS_FS is not set
> # CONFIG_XFS_FS is not set
> 
> #
> # Network File Systems
> #
> # CONFIG_CODA_FS is not set
> # CONFIG_INTERMEZZO_FS is not set
> CONFIG_NFS_FS=y
> CONFIG_NFS_V3=y
> # CONFIG_NFS_V4 is not set
> CONFIG_NFSD=y
> CONFIG_NFSD_V3=y
> # CONFIG_NFSD_V4 is not set
> # CONFIG_NFSD_TCP is not set
> CONFIG_SUNRPC=y
> CONFIG_LOCKD=y
> CONFIG_LOCKD_V4=y
> CONFIG_EXPORTFS=y
> CONFIG_CIFS=y
> CONFIG_SMB_FS=y
> CONFIG_SMB_NLS_DEFAULT=y
> CONFIG_SMB_NLS_REMOTE="cp850"
> # CONFIG_NCP_FS is not set
> # CONFIG_AFS_FS is not set
> CONFIG_ZISOFS_FS=y
> CONFIG_FS_MBCACHE=y
> 
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
> CONFIG_SMB_NLS=y
> CONFIG_NLS=y
> 
> #
> # Native Language Support
> #
> CONFIG_NLS_DEFAULT="iso8859-1"
> CONFIG_NLS_CODEPAGE_437=y
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> CONFIG_NLS_CODEPAGE_850=y
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> CONFIG_NLS_ISO8859_1=y
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> CONFIG_NLS_ISO8859_15=y
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> CONFIG_NLS_UTF8=y
> 
> #
> # Graphics support
> #
> # CONFIG_FB is not set
> CONFIG_VIDEO_SELECT=y
> 
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> # CONFIG_MDA_CONSOLE is not set
> CONFIG_DUMMY_CONSOLE=y
> 
> #
> # Sound
> #
> CONFIG_SOUND=y
> 
> #
> # Open Sound System
> #
> CONFIG_SOUND_PRIME=y
> # CONFIG_SOUND_BT878 is not set
> # CONFIG_SOUND_CMPCI is not set
> CONFIG_SOUND_EMU10K1=y
> CONFIG_MIDI_EMU10K1=y
> # CONFIG_SOUND_FUSION is not set
> # CONFIG_SOUND_CS4281 is not set
> # CONFIG_SOUND_ES1370 is not set
> # CONFIG_SOUND_ES1371 is not set
> # CONFIG_SOUND_ESSSOLO1 is not set
> # CONFIG_SOUND_MAESTRO is not set
> # CONFIG_SOUND_MAESTRO3 is not set
> # CONFIG_SOUND_ICH is not set
> # CONFIG_SOUND_RME96XX is not set
> # CONFIG_SOUND_SONICVIBES is not set
> # CONFIG_SOUND_TRIDENT is not set
> # CONFIG_SOUND_MSNDCLAS is not set
> # CONFIG_SOUND_MSNDPIN is not set
> # CONFIG_SOUND_VIA82CXXX is not set
> CONFIG_SOUND_OSS=y
> CONFIG_SOUND_TRACEINIT=y
> CONFIG_SOUND_DMAP=y
> # CONFIG_SOUND_AD1816 is not set
> # CONFIG_SOUND_SGALAXY is not set
> # CONFIG_SOUND_ADLIB is not set
> # CONFIG_SOUND_ACI_MIXER is not set
> # CONFIG_SOUND_CS4232 is not set
> # CONFIG_SOUND_SSCAPE is not set
> # CONFIG_SOUND_GUS is not set
> # CONFIG_SOUND_VMIDI is not set
> # CONFIG_SOUND_TRIX is not set
> # CONFIG_SOUND_MSS is not set
> # CONFIG_SOUND_MPU401 is not set
> # CONFIG_SOUND_NM256 is not set
> # CONFIG_SOUND_MAD16 is not set
> # CONFIG_SOUND_PAS is not set
> # CONFIG_SOUND_PSS is not set
> CONFIG_SOUND_SB=y
> # CONFIG_SOUND_AWE32_SYNTH is not set
> # CONFIG_SOUND_WAVEFRONT is not set
> # CONFIG_SOUND_MAUI is not set
> # CONFIG_SOUND_YM3812 is not set
> # CONFIG_SOUND_OPL3SA1 is not set
> # CONFIG_SOUND_OPL3SA2 is not set
> # CONFIG_SOUND_YMFPCI is not set
> # CONFIG_SOUND_UART6850 is not set
> # CONFIG_SOUND_AEDSP16 is not set
> 
> #
> # Advanced Linux Sound Architecture
> #
> # CONFIG_SND is not set
> 
> #
> # USB support
> #
> # CONFIG_USB is not set
> 
> #
> # Bluetooth support
> #
> # CONFIG_BT is not set
> 
> #
> # Profiling support
> #
> # CONFIG_PROFILING is not set
> 
> #
> # Kernel hacking
> #
> CONFIG_DEBUG_KERNEL=y
> # CONFIG_DEBUG_STACKOVERFLOW is not set
> # CONFIG_DEBUG_SLAB is not set
> # CONFIG_DEBUG_IOVIRT is not set
> CONFIG_MAGIC_SYSRQ=y
> # CONFIG_DEBUG_SPINLOCK is not set
> CONFIG_KALLSYMS=y
> # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> # CONFIG_FRAME_POINTER is not set
> CONFIG_X86_EXTRA_IRQS=y
> CONFIG_X86_FIND_SMP_CONFIG=y
> CONFIG_X86_MPPARSE=y
> 
> #
> # Security options
> #
> CONFIG_SECURITY=y
> CONFIG_SECURITY_CAPABILITIES=y
> # CONFIG_SECURITY_ROOTPLUG is not set
> 
> #
> # Cryptographic options
> #
> CONFIG_CRYPTO=y
> CONFIG_CRYPTO_HMAC=y
> CONFIG_CRYPTO_NULL=y
> CONFIG_CRYPTO_MD4=y
> CONFIG_CRYPTO_MD5=y
> CONFIG_CRYPTO_SHA1=y
> CONFIG_CRYPTO_SHA256=y
> CONFIG_CRYPTO_DES=y
> CONFIG_CRYPTO_BLOWFISH=y
> CONFIG_CRYPTO_TWOFISH=y
> CONFIG_CRYPTO_SERPENT=y
> # CONFIG_CRYPTO_TEST is not set
> 
> #
> # Library routines
> #
> CONFIG_CRC32=y
> CONFIG_ZLIB_INFLATE=y
> CONFIG_ZLIB_DEFLATE=y
> CONFIG_X86_BIOS_REBOOT=y
> 
> Any clue ?
> 
> Regards,
> Paul Rolland, rol@as2917.net
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
> 



  reply	other threads:[~2002-12-29 16:50 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-12-29 15:29 [2.5.53] So sloowwwww Paul Rolland
2002-12-29 16:56 ` Andrew Walrond [this message]
2002-12-29 17:12   ` Paul Rolland
2002-12-29 21:07     ` Andrew Walrond
2002-12-29 22:06       ` Paul Rolland
2002-12-29 17:30 ` John Stoffel
2002-12-29 17:36   ` Paul Rolland
2002-12-30 13:16     ` venom
2002-12-29 18:55 ` Alvaro Lopes
2002-12-29 19:16   ` Paul Rolland
  -- strict thread matches above, loose matches on Subject: below --
2002-12-29 17:12 rwhron
2002-12-29 17:13 ` Paul Rolland
2002-12-29 17:47 Manfred Spraul
2002-12-29 17:54 ` John Bradford
2002-12-29 18:18 ` Paul Rolland
2002-12-29 18:22 Hell.Surfers
     [not found] <fa.el8u04v.1jks783@ifi.uio.no>
     [not found] ` <fa.f29f77v.on2i97@ifi.uio.no>
2003-01-02  7:26   ` Andrew S. Johnson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3E0F2954.1040502@walrond.org \
    --to=andrew@walrond.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rol@as2917.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.