Re: packet radio indoor

[Chuck Gelm <nc8q@gelm.net>]

Hi, Vivi:

 I'd like to see the output of
route -n


HTH, Chuck


Vivi Kusumo wrote:
> 
> Dear all,
> 
> I will use packet radio only in a room
> |pc1|--|sc1|--|ht1| <--/
>                       /--> |ht2|--|sc2|--|pc2|
> The hardware and software are:
> Personal Computer
> Sound Card
> HT
> RH Linux 7.1 kernel upgraded 2.4.19 and radio packet
> support
> libax25-0.0.9
> ax25-apps-0.0.6
> ax25-tools-0.0.8
> node.0.3.0
> soundmodem-0.7
> 
> First of all I am using stereo cable to connect 2
> machines without ht and checking if the TCP/IP
> facilities works such as ping, ftp, telnet and ssh.
> |pc1|--|sc1|--------|sc2|--|pc2|
> 
> According to
> <http://people.zeelandnet.nl/pa3gcu/installax25.htm> I
> have installed the ax.25 stuff and node.0.3.0 in pc1
> and pc2, and all going well without error message in
> the directory </usr/local/src>. Than I  installed the
> soundmodem-0.7 in the same directory.
> 
> my1com# ifconfig
> sm0  Link encap: AMPR AX.25 HWaddr MY1COM
>      inet addr: 44.128.1.5 Bcast: 44.128.1.255 Mask:
> 255.255.255.0
>      ..
> 
> my2com# ifconfig
> sm0  Link encap: AMPR AX.25 HWaddr MY2COM
>      inet addr: 44.128.1.8 Bcast: 44.128.1.255 Mask:
> 255.255.255.0
>      ..
> 
> Next I have connected sc1 and sc2 using stereo cables
> as follow:
> MIC-sc1|----|SPK-sc2
> 
> SPK-sc1|----|MIC-sc2
> 
> But the "ping", "ftp", "ssh" and "telnet" commands
> don't work from pc1 to pc2 and virce virca.
> [my1com]$ ping my2com
> PING my2com.ampr.org (44.128.1.8) from 44.128.1.5:
> 56(84) bytes of data
> >From my1com.ampr.org (44.128.1.5): Destination Host
> unreachable
> >From my1com.ampr.org (44.128.1.5): Destination Host
> unreachable
> >From my1com.ampr.org (44.128.1.5): Destination Host
> unreachable
> 
> --- my2com.ampr.org ping statistics ---
> 4 packets transmitted, 0 packet received, +3 errors,
> 100% packet loss
> 
> Please any idea what should I do to make "ping",
> "ftp", "ssh" and "telnet" commands workable and
> useable?
> 
> Thanks
> Vivi