From: Randy Broman <rbroman@bayarea.net>
To: John Bradford <john@grabjohn.com>
Cc: linux-kernel@vger.kernel.org, rbroman@bayarea.net
Subject: Re: RH73 Promise ATA/133 Install Problems
Date: Sat, 04 Jan 2003 11:31:05 -0800 [thread overview]
Message-ID: <3E173679.6050807@bayarea.net> (raw)
In-Reply-To: 200301041859.h04IxaGQ002334@darkstar.example.net
# lspci -v -v
00:0f.0 RAID bus controller: Promise Technology, Inc. PDC20276 IDE (rev
01) (prog-if 85)
Subsystem: Giga-byte Technology: Unknown device b001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 4500ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at e800 [size=8]
Region 1: I/O ports at e400 [size=4]
Region 2: I/O ports at e000 [size=8]
Region 3: I/O ports at dc00 [size=4]
Region 4: I/O ports at d800 [size=16]
Region 5: Memory at dffc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
John Bradford wrote:
>>I have a Gigabyte GA-7VRXP motherboard which has an on-board
>>Promise 20276 ATA133/RAID controller. I want to install RH73, on the
>>two ATA133 drives connected to the Promise controller. I've set up
>>the motherboard BIOS with the Promise 20276 interfaces as ATA (not
>>RAID), and I want to install on the two drives in a software RAID
>>configuration.
>>
>>If I start the standard RH73 install it does not identify the two drives
>>connected to the Promise interfaces.
>>
>
>Support for the Promise 20276 went in to the kernel at 2.4.19-pre6.
>
>Can you get to a command prompt and post the output of lspci -v -v?
>Maybe it has a non standard PCI id and is not being recognised.
>
>John.
>
next prev parent reply other threads:[~2003-01-04 19:20 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-01-04 18:52 RH73 Promise ATA/133 Install Problems Randy Broman
2003-01-04 18:59 ` John Bradford
2003-01-04 19:31 ` Randy Broman [this message]
2003-01-04 19:37 ` John Bradford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3E173679.6050807@bayarea.net \
--to=rbroman@bayarea.net \
--cc=john@grabjohn.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.