From: Pantelis Antoniou <panto@intracom.gr>
To: linuxppc-dev@lists.linuxppc.org
Subject: Status of linuxppc_2.5
Date: Wed, 08 Jan 2003 11:18:10 +0200 [thread overview]
Message-ID: <3E1BECD2.9060909@intracom.gr> (raw)
[-- Attachment #1: Type: text/plain, Size: 349 bytes --]
Hi
I'm trying to compile linuxppc_2.5
and the following patch is needed to
make it compile.
The configuration is from
make pmac_config.
I didn't test it though, I don't have
a test pmac system, my intention is to
test it on a 8xx system.
BTW, are there any gotchas, or anything
I should pay attention moving
from 2.4 -> 2.5?
Regards
Pantelis
[-- Attachment #2: compile-2.5.diff --]
[-- Type: text/plain, Size: 3025 bytes --]
===== arch/ppc/kernel/traps.c 1.21 vs edited =====
--- 1.21/arch/ppc/kernel/traps.c Mon Jan 6 09:02:42 2003
+++ edited/arch/ppc/kernel/traps.c Wed Jan 8 09:23:43 2003
@@ -174,7 +174,7 @@
(*nip & 0x100)? "OUT to": "IN from",
regs->gpr[rb] - _IO_BASE, nip);
regs->msr |= MSR_RI;
- regs->nip = fixup;
+ regs->nip = entry->fixup;
return;
}
}
===== drivers/block/swim3.c 1.22 vs edited =====
--- 1.22/drivers/block/swim3.c Fri Dec 6 03:10:45 2002
+++ edited/drivers/block/swim3.c Wed Jan 8 10:40:20 2003
@@ -26,6 +26,7 @@
#include <linux/ioctl.h>
#include <linux/blk.h>
#include <linux/devfs_fs_kernel.h>
+#include <linux/interrupt.h>
#include <asm/io.h>
#include <asm/dbdma.h>
#include <asm/prom.h>
===== drivers/macintosh/mediabay.c 1.10 vs edited =====
--- 1.10/drivers/macintosh/mediabay.c Tue Nov 12 01:47:53 2002
+++ edited/drivers/macintosh/mediabay.c Wed Jan 8 10:53:47 2003
@@ -36,6 +36,7 @@
#include <asm/keylargo.h>
#include <linux/adb.h>
#include <linux/pmu.h>
+#include <linux/ide.h>
#ifdef CONFIG_PMAC_PBOOK
static int mb_notify_sleep(struct pmu_sleep_notifier *self, int when);
@@ -599,7 +600,7 @@
if (bay->cd_index >= 0) {
printk(KERN_DEBUG "Unregistering mb %d ide, index:%d\n", i,
bay->cd_index);
- ide_unregister(&ide_hwifs[bay->cd_index]);
+ ide_unregister(bay->cd_index);
bay->cd_index = -1;
}
if (bay->cd_retry) {
===== drivers/usb/host/ohci-pci.c 1.6 vs edited =====
--- 1.6/drivers/usb/host/ohci-pci.c Sun Dec 1 04:21:11 2002
+++ edited/drivers/usb/host/ohci-pci.c Wed Jan 8 10:49:46 2003
@@ -18,6 +18,7 @@
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/pci-bridge.h>
+#include <asm/prom.h>
#ifndef CONFIG_PM
# define CONFIG_PM
#endif
===== fs/nfs/write.c 1.36 vs edited =====
--- 1.36/fs/nfs/write.c Sat Dec 21 08:29:02 2002
+++ edited/fs/nfs/write.c Wed Jan 8 10:38:32 2003
@@ -828,7 +828,9 @@
struct nfs_write_data *data = (struct nfs_write_data *) task->tk_calldata;
struct nfs_writeargs *argp = &data->args;
struct nfs_writeres *resp = &data->res;
+#if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4)
struct inode *inode = data->inode;
+#endif
struct nfs_page *req;
struct page *page;
===== include/linux/ide.h 1.32 vs edited =====
--- 1.32/include/linux/ide.h Sat Dec 28 21:09:38 2002
+++ edited/include/linux/ide.h Wed Jan 8 10:47:16 2003
@@ -334,6 +334,9 @@
*/
int ide_register_hw(hw_regs_t *hw, struct hwif_s **hwifp);
+/* XXX panto */
+void ide_unregister (unsigned int index);
+
/*
* Set up hw_regs_t structure before calling ide_register_hw (optional)
*/
next reply other threads:[~2003-01-08 9:18 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-01-08 9:18 Pantelis Antoniou [this message]
2003-01-08 17:32 ` Status of linuxppc_2.5 Boris Bezlaj
2003-01-08 18:18 ` Benjamin Herrenschmidt
2003-01-08 18:22 ` Boris Bezlaj
2003-01-08 18:34 ` Benjamin Herrenschmidt
2003-01-08 19:30 ` Boris Bezlaj
2003-01-09 8:13 ` Pantelis Antoniou
2003-01-09 8:30 ` Brad Boyer
2003-01-08 22:15 ` Michel Lanners
2003-01-08 21:46 ` Benjamin Herrenschmidt
2003-01-08 23:11 ` Paul Mackerras
2003-01-12 17:14 ` Michel Lanners
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3E1BECD2.9060909@intracom.gr \
--to=panto@intracom.gr \
--cc=linuxppc-dev@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.