From: Frank Jacobberger <f1j1@xmission.com>
To: tom@qwws.net
Cc: linux-kernel@vger.kernel.org
Subject: Re: poor IDE performance on ASUS P4PE with WD800JB
Date: Sun, 26 Jan 2003 15:19:51 -0700 [thread overview]
Message-ID: <3E345F07.60307@xmission.com> (raw)
In-Reply-To: <200301262039.38783.tom@qwws.net>
Tom Winkler wrote:
>Hi,
>
>I've asked this question in several Newsgroups but nobody was really
>able to answer it. That's why I decided to send it to LKM. Please CC
>me on your replies. Thanks!
>
>I've got a question related to ide performance.
>First of all my hardware:
>Mainboard: ASUS P4PE (using onboard IDE but not S-ATA)
> http://www.asus.com/products/mb/socket478/p4pe/overview.htm
>Harddisk: Western Digital WD800JB
> http://www.westerndigital.com/products/products.asp?DriveID=32
>
Well I have the same P4PE and here are mine:
hdparm -I /dev/hda
/dev/hda:
ATA device, with non-removable media
Model Number: WDC WD300BB-00AUA1
Serial Number: WD-WMA6W2128969
Firmware Revision: 18.20D18
Standards:
Supported: 5 4 3 2
Likely used: 6
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 58633344
device size with M = 1024*1024: 28629 MBytes
device size with M = 1000*1000: 30020 MBytes (30 GB)
Capabilities:
LBA, IORDY(can be disabled)
bytes avail on r/w long: 40 Queue depth: 1
Standby timer values: spec'd by Standard, with device specific
minimum
R/W multiple sector transfer: Max = 16 Current = 16
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
SMART feature set
Automatic Acoustic Management feature set
SET MAX security extension
* DOWNLOAD MICROCODE cmd
Security:
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
-------------------------------------------------------------------------------------------
hdparm -tT /dev/hda
/dev/hda:
Timing buffer-cache reads: 128 MB in 0.35 seconds =365.71 MB/sec
Timing buffered disk reads: 64 MB in 2.00 seconds = 32.00 MB/sec
------------------------------------------------------------------------------------------
cat /proc/ide/hda/settings
name value min
max mode
---- ----- ---
--- ----
acoustic 0 0
254 rw
address 0 0
2 rw
bios_cyl 3649 0 65535 rw
bios_head 255 0
255 rw
bios_sect 63 0
63 rw
breada_readahead 8 0 255 rw
bswap 0 0
1 r
current_speed 69 0
70 rw
failures 0 0
65535 rw
file_readahead 124 0 16384 rw
init_speed 69 0
70 rw
io_32bit 0 0
3 rw
keepsettings 0 0
1 rw
lun 0 0
7 rw
max_failures 1 0 65535 rw
max_kb_per_request 128 1 255 rw
multcount 16 0
16 rw
nice1 1 0
1 rw
nowerr 0 0
1 rw
number 0 0
3 rw
pio_mode write-only 0 255 w
slow 0 0
1 rw
unmaskirq 0 0
1 rw
using_dma 1 0
1 rw
wcache 0 0
1 rw
next prev parent reply other threads:[~2003-01-26 22:10 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-01-26 19:39 poor IDE performance on ASUS P4PE with WD800JB Tom Winkler
2003-01-26 22:19 ` Frank Jacobberger [this message]
2003-01-27 2:23 ` Mike Dresser
2003-01-27 21:23 ` Bill Davidsen
2003-01-27 22:21 ` Jean-Daniel Pauget
-- strict thread matches above, loose matches on Subject: below --
2003-01-23 14:09 Tom Winkler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3E345F07.60307@xmission.com \
--to=f1j1@xmission.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tom@qwws.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.