Re: ide-scsi fails with kernels > 2.4.1

[Douglas Gilbert <dougg@torque.net>]

Andrei Loukinykh wrote:
>  Hi all
>   Being a sort of god damn tired (sorry), i decided to ask here
> 
>  In short:
>    My CDRW refuses to work with any kernel bigger than 2.4.1.
> 
> It is IDE-CDRW . I use ide-scsi driver for this.
> With 2.4.1 - all o'k.
>  Then I tried 2.4.7 ... 2.4.9 ... 2.4.19.. 2.4.20 ( i dont remember al of
> them) - none works. I get the following:
> 
> hdc: SAMSUNG CD-R/RW SW-408B, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> blk: queue c030e544, I/O limit 4095Mb (mask 0xffffffff)
> hda: 12672450 sectors (6488 MB), CHS=788/255/63, UDMA(33)
> hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
> hdc: set_drive_speed_status: error=0x04
> 
> 
> Someone please help
>  I desperately need 2.4.20 for my devices to work, but I also need CDR..

Andrei,
Do either of these lines help?
     hdparm -d0 -c1 /dev/hdc
     hdparm -d 1 -X 34 /dev/hdc

For more information see the:
     http://www.torque.net/sg/faq.html
entry on cdrecord [item 3.2].

Hope this helps.

Doug Gilbert