From: Narsimha Reddy CH <creddy@npd.hcltech.com>
To: whitnl73@juno.com
Cc: linux-newbie@vger.kernel.org
Subject: Re: How to install two linux OSes on the same PC
Date: Fri, 07 Feb 2003 13:34:38 +0530 [thread overview]
Message-ID: <3E436896.80706@npd.hcltech.com> (raw)
In-Reply-To: 20030205.160000.8.2.whitnl73@juno.com
Thanks a lot for your help. It really worked with disk driud. It
cleverly managed the name conflicts of lables i.e. for first
installation the root is "/" and for the second installation the root
lable is "/1". And I can boot both of them using LILO.
Regards,
- Narsimha
whitnl73@juno.com wrote:
>On Wed, 5 Feb 2003, Narsimha Reddy CHALLA wrote:
>
>
>
>>Hi All,
>>
>> I want to do two different linux installations rh 7.2 and rh
>>8.0 on the same pc with single hard disk. I installed the rh 7.2 in
>>partitions say /dev/hda5 ( /) , /dev/hda6 (/home) , /dev/hda7 (
>>/usr) ,
>>/dev/hda8 ( /tmp),... /dev/hda11 etc.
>>
>> But how can I install the rh 8.0 in partitions say /dev/hda12
>>( as "/" ) ... etc ?? Since the installer won't allow as there
>>already exists a "/" partition for the rh 7.2 and tries to override
>>it with the root partition of rh 8.0. So I tried giving a different
>>lable to the root partition of rh 8.0 say /root1 and other partitions
>>as /root1/usr, /root1/home, /root1/tmp etc. But here also the installer
>>is looking for the partition named "/" and without that the installation
>>is not happening.
>>
>>
>>Please give your suggestions on how to resolve this problem.
>>
>>
>>At present my partition table with single installation (rh 7.2) is,
>>
>>[root@creddy-pc root]# fdisk -l
>>
>>Disk /dev/hda: 255 heads, 63 sectors, 2434 cylinders
>>Units = cylinders of 16065 * 512 bytes
>>
>> Device Boot Start End Blocks Id System
>>/dev/hda1 * 1 261 2096451 6 FAT16
>>/dev/hda2 262 2434 17454622+ 5 Extended
>>/dev/hda5 262 522 2096451 6 FAT16
>>/dev/hda6 523 653 1052226 83 Linux
>>/dev/hda7 654 1175 4192933+ 83 Linux
>>/dev/hda8 1176 1371 1574338+ 83 Linux
>>/dev/hda9 1372 1436 522081 82 Linux swap
>>/dev/hda10 1437 1501 522081 83 Linux
>>/dev/hda11 1502 1566 522081 83 Linux
>>[root@creddy-pc root]#
>>
>>
>>TIA,
>>- Narsimha Reddy CH
>>-
>>
>>
>
>Well, you could change the partition type of the existing installation,
>in hope that the installer will ignore it. It doesn't matter to linux
>what the partition type is as long as it has a filesystem of the type
>expected in /etc/fstab.
>
>Lawson
>
>
>--
>---oops---
>
>
>
>
>________________________________________________________________
>Sign Up for Juno Platinum Internet Access Today
>Only $9.95 per month!
>Visit www.juno.com
>-
>To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at http://www.linux-learn.org/faqs
>
>
>
>
--
Narsimha Reddy CH
Storage Area Networking, HCL Technologies
Contact +91-044 2372 8366 ext 1128
http://san.hcltech.com
http://www.hcltech.com
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
next prev parent reply other threads:[~2003-02-07 8:04 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-02-05 22:08 How to install two linux OSes on the same PC Narsimha Reddy CHALLA
2003-02-05 15:58 ` pa3gcu
2003-02-05 20:43 ` whitnl73
2003-02-07 8:04 ` Narsimha Reddy CH [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-02-05 22:09 Narsimha Reddy CHALLA
2003-02-05 13:06 ` Dave Kleikamp
2003-02-07 8:02 ` Narsimha Reddy CH
2003-02-05 22:06 Narsimha Reddy CHALLA
2003-02-05 9:24 ` Bryan Andersen
2003-02-05 21:10 ` Dave Vehrs
2003-02-07 8:08 ` Narsimha Reddy CH
2003-02-05 15:58 Pa3gcu
2003-02-05 15:43 Whitnl73@juno.com
2003-02-05 14:08 Narsimha Reddy Challa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3E436896.80706@npd.hcltech.com \
--to=creddy@npd.hcltech.com \
--cc=linux-newbie@vger.kernel.org \
--cc=whitnl73@juno.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.