All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Andrew B. Cramer" <andrew.cramer@cramer-ts.com>
To: "Jorge R . Csapo" <jorge@completo.com.br>, linux-admin@vger.kernel.org
Subject: Re: screensaver
Date: Tue, 11 Feb 2003 14:09:28 -0600	[thread overview]
Message-ID: <3E490418.3454.DC5B3AA@localhost> (raw)
In-Reply-To: <20030211175120.A7094@completo.com.br>


Hi,
	Look for the below message in 'rc.M'. Just comment it out.

# Screen blanks after 15 minutes idle time.
/bin/setterm -blank 15

Best - Andrew

On 11 Feb 2003 at 17:51, Jorge R . Csapo wrote:

> Hi all,
> 
> I'm having an annoying problem and I wonder if someone can help me. I have a
> box (slack 8.0) on which I need to disable screen saving. I have disabled
> everything related to APM and power conserving in the bios. I don't have
> screensaver running on X. Everything related to it in the kernel is disable.
> But still, after a few minutes the screen goes blank.
> 
> Here is my XF86Config:
> 
> Section "ServerLayout"
>         Identifier     "Layout0"
>         Screen      0  "Screen0" 0 0
>         InputDevice    "Keyboard0" "CoreKeyboard"
>         InputDevice    "toque0" "CorePointer"
> EndSection
> 
> Section "Files"
>         ModulePath "/usr/X11R6/lib/modules"
>         FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
>         FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
>         FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
>         FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
>         FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
>         FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
>         FontPath     "/usr/X11R6/lib/X11/fonts/TT/"
> EndSection
> 
> Section "Module"
>         Load  "xie"
>         Load  "pex5"
>         Load  "glx"
>         Load  "dri"
>         Load  "dbe"
>         Load  "record"
>         Load  "extmod"
>         Load  "type1"
>         Load  "freetype"
> EndSection
> 
> Section "InputDevice"
>         Identifier  "Mouse0"
>         Driver      "mouse"
>         Option      "Protocol" "PS/2"
>         Option      "Emulate3Buttons"
>         Option      "Device" "/dev/mouse"
> EndSection
> 
> Section "InputDevice"
>         Identifier  "toque0"
>         Driver "mutouch"
>         Option "Device" "/dev/ttyS0"
>         Option "MinimumXPosition" "100"
>         Option "MaximumXPosition" "16384"
>         Option "MinimumYPosition" "100"
>         Option "MaximumYPosition" "16384"
>         Option "Type" "finger"
> EndSection
> 
> Section "InputDevice"
>         Identifier  "Keyboard0"
>         Driver      "keyboard"
>         Option      "XkbModel" "pc102"
>         Option      "XkbLayout" "us_intl"
> EndSection
> 
> Section "Monitor"
>         Identifier   "Monitor0"
>         HorizSync    31.5 - 37.9
>         VertRefresh  50.0 - 90.0
> EndSection
> 
> Section "Device"
>         Identifier  "Card0"
>         Driver      "vesa"
> EndSection
> 
> Section "Screen"
>         Identifier "Screen0"
>         Device     "Card0"
>         Monitor    "Monitor0"
>         DefaultDepth     16
>         SubSection "Display"
>                 Depth     16
>                 Modes    "1024x768"
>         EndSubSection
> EndSection
> 
> and my xinitrc:
> 
> #!/bin/sh
> 
> userresources=$HOME/.Xresources
> usermodmap=$HOME/.Xmodmap
> sysresources=/usr/X11R6/lib/X11/xinit/.Xresources
> sysmodmap=/usr/X11R6/lib/X11/xinit/.Xmodmap
> 
> # merge in defaults and keymaps
> 
> if [ -f $sysresources ]; then
>     xrdb -merge $sysresources
> fi
> 
> if [ -f $sysmodmap ]; then
>     xmodmap $sysmodmap
> fi
> 
> if [ -f $userresources ]; then
>     xrdb -merge $userresources
> fi
> 
> if [ -f $usermodmap ]; then
>     xmodmap $usermodmap
> fi
> 
> # start some nice programs
> 
> twm -f /etc/twm.cfg &
> xv -quit -root /etc/logosembarra.pcx &
> xsetroot -cursor /etc/cursor.juke /etc/mask.juke &
> /postgres_home/My_Vending_App ; /bin/setleds -L -caps
> 
> It's driving me NUTS!
> 
> any ideas?
> 
> TIA
> 
> 
> -- 
> Jorge R. Csapo
> --------------------------------------------------
>  /"\
>  \ / CAMPANHA DA FITA ASCII - CONTRA MAIL HTML
>   X  ASCII RIBBON CAMPAIGN - AGAINST HTML MAIL
>  / \
> --------------------------------------------------
> http://www.completo.com.br/~jorge
> ===========================================
> With a PC, I always felt limited
> by the software available.
> On Unix, I am limited only by my knowledge.
> --Peter J. Schoenster
> -
> To unsubscribe from this list: send the line "unsubscribe linux-admin" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 




  reply	other threads:[~2003-02-11 20:09 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-02-11 18:51 screensaver Jorge R . Csapo
2003-02-11 20:09 ` Andrew B. Cramer [this message]
2003-02-12  7:18 ` screensaver Glynn Clements
2003-02-12 12:05   ` screensaver - SOLVED Jorge R . Csapo
  -- strict thread matches above, loose matches on Subject: below --
2005-04-14 18:17 screensaver Manuel Schneider
2005-04-14 17:03 screensaver sauro
2005-04-14 18:11 ` screensaver Richard B. Johnson
2003-05-20  1:09 Screensaver support
2003-05-20  1:25 ` Screensaver David Woodhouse
2003-05-20  1:33   ` Screensaver Gregg C Levine
2002-11-11  1:46 screensaver neil t

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3E490418.3454.DC5B3AA@localhost \
    --to=andrew.cramer@cramer-ts.com \
    --cc=jorge@completo.com.br \
    --cc=linux-admin@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.