From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mathias Kretschmer Subject: VIA EPIA (VT1612A) and SPDIF Date: Tue, 18 Feb 2003 19:17:47 -0500 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <3E52CD2B.7090505@lemur.sytes.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Hi, I'm wondering if anyone has SPDIF working on the VIA EPIA ESP5000 under rc7? Analog output is working fine for me using rc7 and the CVS via82xx module (1.25). But, I didn't have any luck getting SPDIF (PCM) to work using a Pioneer Digital Receiver. Any success reports or any hints which knobs to turn to make it work ? Cheers, Mathias Some info from /proc/asound: [root@musicbox root]# cat /proc/asound/cards 0 [rev40 ]: VIA686A - VIA 82C686A/B rev40 VIA 82C686A/B rev40 at 0xdc00, irq 10 [root@musicbox root]# cat /proc/asound/card0/ac97#0 0-0/0: VIA Technologies VIA1612A Capabilities : -headphone out- DAC resolution : 18-bit ADC resolution : 18-bit 3D enhancement : Reserved 27 Current setup Mic gain : +0dB [+0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off Extended ID : codec=0 rev=0 AMAP DSA=0 SPDIF VRA Extended status : SPDIF=3/4 SPDIF VRA PCM front DAC : 44100Hz PCM ADC : 48000Hz SPDIF Control : Consumer PCM Copyright Category=0x2 Generation=1 Rate=48kHz ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf