From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mathias Kretschmer Subject: Re: VIA EPIA (VT1612A) and SPDIF Date: Fri, 21 Feb 2003 22:19:16 -0500 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <3E56EC34.1050205@lemur.sytes.net> References: <3E52CD2B.7090505@lemur.sytes.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Takashi Iwai Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Takashi Iwai wrote: > At Tue, 18 Feb 2003 19:17:47 -0500, > Mathias Kretschmer wrote: > >>Hi, >> >>I'm wondering if anyone has SPDIF working on the >>VIA EPIA ESP5000 under rc7? >> >>Analog output is working fine for me using rc7 and the CVS via82xx >>module (1.25). But, I didn't have any luck getting SPDIF (PCM) to work >>using a Pioneer Digital Receiver. >> >>Any success reports or any hints which knobs to turn to make it work ? > > > the code on rc7 doesn't set the correct SPDIF rate, so it won't work > properly. i changed via82xx.c to set it for via686, too. please try > the cvs version. OK, I just installed the lastest CVS snapshot and also copied VIA686A.conf to /usr/share/alsa/cards. Using aplay I'm getting some spdif output. It's very jerky, though. There is audio for a few 100ms and then silence, and then signal again. Same effect using an OSS player. The analog output works fine - no interruptions at all. The sample rate as either 44.1kHz or 48kHz - same problem. I just got a EPIA-M1000 board. It has a 8235 and spdif works just fine here using either aplay or an OSS player. Any further info I can provide to help tracking down the problem ? Cheers, Mathias ------------------------------------------------------- This SF.net email is sponsored by: SlickEdit Inc. Develop an edge. The most comprehensive and flexible code editor you can use. Code faster. C/C++, C#, Java, HTML, XML, many more. FREE 30-Day Trial. www.slickedit.com/sourceforge