From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3E5B382B.2090908@conterra.de> From: Dieter Stueken MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Subject: [linux-lvm] pv_move failed Sender: linux-lvm-admin@sistina.com Errors-To: linux-lvm-admin@sistina.com Reply-To: linux-lvm@sistina.com List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: Date: Tue Feb 25 03:33:01 2003 List-Id: Content-Type: text/plain; charset="utf-8"; format="flowed" To: linux-lvm@sistina.com I just got my new 240GB disk and want to move my VG to it. Unfortunately I get an unexpected error: lv: /dev/backup/mirror[2] old_dev: 22:00 new_dev: 03:02 old_pe_sector: 117703032 new_pe_sector: 357564792 pvmove -- opening output physical volume "/dev/hda2" pvmove -- llseeking input physical volume "/dev/hdc" pvmove -- llseeking output physical volume "/dev/hda2" pvmove -- /dev/hdc [PE 897 [mirror [LE 2727]] -> /dev/hda2 [PE 2727] [1/247] pvmove -- locking physical extent 897 of "/dev/hdc" in kernel pvmove -- about to read input physical volume "/dev/hdc" and to write output physical volume "/dev/hda2" pvmove -- ERROR writing output physical volume "/dev/hda2" (still 12648448 bytes to write) pvmove -- ERROR "pv_move_pe(): writing output PE" moving physical extents this time I can not identify any reason an no messages on syslog. Any idea? What informations should I dump/post in addition? I'm using SuSE8.1 with kernel 2.4.20, the LVM-version is 1.0.5. ... and, sorry for my ill formed subject line from last week. Dieter -- Dieter St�ken, con terra GmbH, M�nster stueken@conterra.de http://www.conterra.de/ (0)251-7474-501