From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans Reiser Subject: Re: Error messages. Date: Thu, 06 Mar 2003 15:16:05 +0300 Message-ID: <3E673C05.7000202@namesys.com> References: <7473069171.20030305201818@tnonline.net> <20030306095743.B5417@namesys.com> <170120728875.20030306093238@tnonline.net> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: list-help: list-unsubscribe: list-post: Errors-To: flx@namesys.com In-Reply-To: <170120728875.20030306093238@tnonline.net> List-Id: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: Anders Widman Cc: reiserfs-list@namesys.com Anders Widman wrote: >>Well, I checked my logs: >>kernel: hdg: status error: status=0x58 { DriveReady SeekComplete DataRequest } >>kernel: hdg: drive not ready for command >> >> > > This is what I get all the time. > > > >>And for this case I am sure this was a scratchy CD-ROM disk in my CD-ROM drive. >> >> > > Well, have no CD-ROM. :) > > > >>Probably same stuff can be get when drive is busy remapping bad sectors? >>Use smartctl to find out how these messages corellate with remapped bad sectors counts? >> >> > > Very strange. Would mean all of my harddrives would be broken, or on > their way to get broken. I do not believe that. Most of the > hardware, including the cabling has been replaced and changed. > > > >>Bye, >> Oleg >> >> > > > >-------- >PGP public key: https://tnonline.net/secure/pgp_key.txt > > > > > Hardware is so much fun to debug sometimes, and when you are the 1% case life can really suck. Do you have: bad cooling bad power supply bad voltage from power company electrical noise ? I think though that Oleg is right that you should contact the IDE guys and ask them for their list of things to check for that particular error message (and tell us about it). -- Hans