From: Hartvig Ekner <hartvig@ekner.info>
To: Eric DeVolder <eric.devolder@amd.com>
Cc: Linux MIPS mailing list <linux-mips@linux-mips.org>
Subject: Re: Au1500 hardware cache coherency
Date: Mon, 31 Mar 2003 21:24:50 +0200 [thread overview]
Message-ID: <3E889602.62B7AB6B@ekner.info> (raw)
In-Reply-To: 3E8883B8.1000000@amd.com
[-- Attachment #1: Type: text/plain, Size: 6681 bytes --]
Hi Eric,
I did a quick check of a complete kernel disassembly, and there are tons of direct or
indirect RMW's to config, which do not explicitly insure that Config[0D] is set.
Pete - are you aware of this? Thus, there seems to be a potential problem lurking
here for anybody who is using USB.
However, I am not using USB at all, and it is configured out of the kernel. So I assume
this is not errata #3 we're seeing here?
So, to summarize: The first set of problems in my email below seem to be fully explained
by errata #14. Note that any kernel compiled from the current CVS exhibits this problem:
Because although NONCOHEHENT_IO is set, the NC bit in PCI_CFG is not set. I have
verified that the problem occurs when NC is cleared, regardless of the .config option. So
some code needs to be changed in au1000/xxx/setup.c... (set NC if NONCOHERENT_IO
is enabled).
But - much wore worrisome: I did this modification, and with the NC bit set, and
NONCOHERENT_IO set, I get the second set of errors, although it takes much longer
time. The wback_inv calls are made through the generic code in the subroutine
pci_alloc_consistent() (in arch/mips/kernel/pci-dma.c).
So something is wrong.... Anybody at AMD who would care to continue the debug?
/Hartvig
Eric DeVolder wrote:
> Yes, this is precisely the errata; my apologies for failing to list it explicitly earlier.
> The only other one to be aware of is that Config[OD] must be set, and the YAMON
> booter does this, but if you ever do a R-M-W of Config, then Config[OD] is reset to
> zero (this is errata #4).
>
> Also, keep in mind that you need CONFIG_NONCOHERENT_IO set so that
> the dma cache routines do a flush (and invalidate) to memory, and that these routines
> need to be called at the appropriate places in the driver.
>
> In your data dump where there are lines "missing", it sort of suggests to me that perhaps
> these memory addresses were already in the cache, and were written to memory, but
> because coherent transactions were disabled, the cache never saw them.
>
> So, in summary, for AB stepping, you need pci_config[NC]=1, Config[OD]=1, and
> CONFIG_NONCOHERENT_IO=y.
>
> Hartvig Ekner wrote:
>
>> Hi Eric,
>>
>> is that errata #12 you are referring to? (only present on silicon stepping AB?) Or are there
>> others also?
>>
>> While using HW coherency for copying large files on disk, I do get occasional data errors
>> which always look like this:
>>
>> 00061000 4c 69 6e 69 65 3a 20 20 20 20 32 34 38 33 32 0a Linie: 24832.
>> 00061010 4c 69 6e 69 65 3a 20 20 20 20 32 34 38 33 33 0a Linie: 24833.
>> 00061020 4c 69 6e 69 65 3a 20 20 20 20 32 34 38 33 34 0a Linie: 24834.
>> 00061030 4c 69 6e 69 65 3a 20 20 20 20 32 34 38 33 35 0a Linie: 24835.
>> 00061040 38 33 35 0a 4c 69 6e 69 65 3a 20 20 20 20 32 34 835.Linie: 24
>> 00061050 38 33 36 0a 4c 69 6e 69 65 3a 20 20 20 20 32 34 836.Linie: 24
>> 00061060 38 33 37 0a 38 33 37 0a 4c 69 6e 69 65 3a 20 20 837.837.Linie:
>> 00061070 4c 69 6e 69 65 3a 20 20 20 20 32 34 38 33 39 0a Linie: 24839.
>> 00061080 38 33 39 0a 4c 69 6e 69 65 3a 20 20 20 20 32 34 839.Linie: 24
>> 00061090 38 34 30 0a 4c 69 6e 69 65 3a 20 20 20 20 32 34 840.Linie: 24
>> 000610a0 38 34 31 0a 38 34 31 0a 4c 69 6e 69 65 3a 20 20 841.841.Linie:
>> 000610b0 20 20 32 34 65 3a 20 20 20 20 32 34 38 34 33 0a 24e: 24843.
>> 000610c0 38 34 33 0a 4c 69 6e 69 65 3a 20 20 20 20 32 34 843.Linie: 24
>> 000610d0 38 34 34 0a 4c 69 6e 69 65 3a 20 20 20 20 32 34 844.Linie: 24
>> 000610e0 38 34 35 0a 38 34 35 0a 4c 69 6e 69 65 3a 20 20 845.845.Linie:
>> 000610f0 20 20 32 34 65 3a 20 20 20 20 32 34 38 34 37 0a 24e: 24847.
>> 00061100 38 34 37 0a 4c 69 6e 69 65 3a 20 20 20 20 32 34 847.Linie: 24
>> 00061110 38 34 38 0a 4c 69 6e 69 65 3a 20 20 20 20 32 34 848.Linie: 24
>> 00061120 38 34 39 0a 38 34 39 0a 4c 69 6e 69 65 3a 20 20 849.849.Linie:
>> 00061130 20 20 32 34 65 3a 20 20 20 20 32 34 38 35 31 0a 24e: 24851.
>> 00061140 4c 69 6e 69 65 3a 20 20 20 20 32 34 38 35 32 0a Linie: 24852.
>> 00061150 4c 69 6e 69 65 3a 20 20 20 20 32 34 38 35 33 0a Linie: 24853.
>> 00061160 4c 69 6e 69 65 3a 20 20 20 20 32 34 38 35 34 0a Linie: 24854.
>> 00061170 4c 69 6e 69 65 3a 20 20 20 20 32 34 38 35 35 0a Linie: 24855.
>> 00061180 4c 69 6e 69 65 3a 20 20 20 20 32 34 38 35 36 0a Linie: 24856.
>> 00061190 4c 69 6e 69 65 3a 20 20 20 20 32 34 38 35 37 0a Linie: 24857.
>> 000611a0 4c 69 6e 69 65 3a 20 20 20 20 32 34 38 35 38 0a Linie: 24858.
>> 000611b0 4c 69 6e 69 65 3a 20 20 20 20 32 34 38 35 39 0a Linie: 24859.
>> 000611c0 4c 69 6e 69 65 3a 20 20 20 20 32 34 38 36 30 0a Linie: 24860.
>>
>> The file consists of 16-byte lines with increasing line numbers. Note that most of
>> the errors are cacheline oriented, but there are also "skews" of 4 bytes going
>> into the next cacheline.
>>
>> However, interestingly enough, switching HW coherency off entirely
>> (in PCI_CFG) and using uncached PCI buffers, there are still failures:
>>
>> 001ec060 4c 69 6e 69 65 3a 20 20 20 31 32 35 39 35 38 0a Linie: 125958.
>> 001ec070 4c 69 6e 69 65 3a 20 20 20 31 32 35 39 35 39 0a Linie: 125959.
>> 001ec080 4c 69 6e 69 65 3a 20 20 20 31 32 35 39 36 30 0a Linie: 125960.
>> 001ec090 4c 69 6e 69 65 3a 20 20 20 31 32 35 39 36 31 0a Linie: 125961.
>> 001ec0a0 00 00 00 00 00 00 00 00 03 00 09 00 00 00 00 00 ................
>> 001ec0b0 00 00 00 00 00 00 00 00 03 00 0a 00 00 00 00 00 ................
>> 001ec0c0 4c 69 6e 69 65 3a 20 20 20 31 32 35 39 36 34 0a Linie: 125964.
>> 001ec0d0 4c 69 6e 69 65 3a 20 20 20 31 32 35 39 36 35 0a Linie: 125965.
>> 001ec0e0 4c 69 6e 69 65 3a 20 20 20 31 32 35 39 36 36 0a Linie: 125966.
>> 001ec0f0 4c 69 6e 69 65 3a 20 20 20 31 32 35 39 36 37 0a Linie: 125967.
>> 001ec100 00 00 00 00 00 00 00 00 10 00 00 00 c7 00 00 00 ................
>> 001ec110 00 00 00 00 00 00 00 00 10 00 00 00 dd 00 00 00 ................
>> 001ec120 4c 69 6e 69 65 3a 20 20 20 31 32 35 39 37 30 0a Linie: 125970.
>> 001ec130 4c 69 6e 69 65 3a 20 20 20 31 32 35 39 37 31 0a Linie: 125971.
>> 001ec140 4c 69 6e 69 65 3a 20 20 20 31 32 35 39 37 32 0a Linie: 125972.
>> 001ec150 4c 69 6e 69 65 3a 20 20 20 31 32 35 39 37 33 0a Linie: 125973.
>> 001ec160 4c 69 6e 69 65 3a 20 20 20 31 32 35 39 37 34 0a Linie: 125974.
>>
>> Is there anything else than bit 16 in the PCI_CFG register which needs to be set
>> to force non-coherent PCI accesses and avoid the PCI errata?
>>
>> /Hartvig
>>
>>
>>
>>
[-- Attachment #2: Type: text/html, Size: 8369 bytes --]
next prev parent reply other threads:[~2003-03-31 19:17 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-03-31 12:08 Au1500 hardware cache coherency Hartvig Ekner
2003-03-31 14:41 ` Eric DeVolder
2003-03-31 15:14 ` Hartvig Ekner
2003-03-31 18:06 ` Eric DeVolder
2003-03-31 19:24 ` Hartvig Ekner [this message]
2003-03-31 20:33 ` Pete Popov
2003-04-01 7:51 ` Hartvig Ekner
2003-04-01 18:22 ` Pete Popov
2003-04-01 18:23 ` Pete Popov
2003-04-02 12:17 ` Maciej W. Rozycki
2003-03-31 18:35 ` Pete Popov
2003-04-01 11:47 ` Ralf Baechle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3E889602.62B7AB6B@ekner.info \
--to=hartvig@ekner.info \
--cc=eric.devolder@amd.com \
--cc=linux-mips@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.