From mboxrd@z Thu Jan  1 00:00:00 1970
From: phil@netroedge.com (Philip Edelbrock)
Date: Thu, 19 May 2005 06:23:52 +0000
Subject: ADM1026
Message-Id: <3E9446D4.8080905@netroedge.com>
List-Id: <lm-sensors.vger.kernel.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
To: lm-sensors@vger.kernel.org


Hi Mary, thanks for the note.  We're currently in the process of=20
developing a driver for the ADM1026.  We are also in the middle of some=20
restructuring after our inclusion of Lm_sensors into Linus' kernel=20
source tree.  I'll pass your offer of assistance to Philip Pokorny who=20
is currently working on the ADM1026 driver.


Phil

Burke, Mary wrote:

>Hi Phil
>
>I am just enquiring about progress. I just got an email from someone
>looking for a Linux driver for the ADM1026. I wonder if you got this
>working and if so is it available on your website.
>BTW if there is anything we can do to help with this development please
>let me know. I will also keep you informed of upcoming products if you
>are interested. Let me know
>
>Thanks in advance
>Regards
>Mary
>
>
>-----Original Message-----
>From: phil@stimpy.netroedge.com [mailto:phil@stimpy.netroedge.com]=20
>Sent: 05 February 2001 17:32
>To: Burke, Mary
>Cc: sensors@stimpy.netroedge.com
>Subject: Re: ADM1026
>
>
>On Mon, Feb 05, 2001 at 07:09:15AM -0500, Burke, Mary wrote:
> =20
>
>>Hi Phil
>>
>>Analog Devices have a new hardware monitoring product (ADM1026) which=20
>>you might be interested in supporting. The prelim version of this=20
>>datasheet may be found at the following address:=20
>>http://products.analog.com/products/info.asp?product=ADM1026
>>I can also send you an evaluation board if you are interested. If you=20
>>have any questions or comments please don't hesitate to contact me.=20
>>Thanks for your support on previous products.
>>   =20
>>
>
>Hi Mary,
>
>Thanks, yeah I'd like an eval board.  It doesn't look like we've played
>with a 1026 yet.  You can send it to me here:
>
>Philip Edelbrock
>Edge Design
>300 SW 2nd St
>Corvallis, OR 97333, USA
>
>Thanks!
>
>
>Phil
>
> =20
>