From: Gert Vervoort <gert.vervoort@hccnet.nl>
To: linux-kernel@vger.kernel.org
Subject: 2.5.67: ppa driver & preempt == oops
Date: Sat, 12 Apr 2003 17:03:08 +0200 [thread overview]
Message-ID: <3E982AAC.3060606@hccnet.nl> (raw)
ppa: Version 2.07 (for Linux 2.4.x)
ppa: Found device at ID 6, Attempting to use EPP 16 bit
ppa: Communication established with ID 6 using EPP 16 bit
scsi0 : Iomega VPI0 (ppa) interface
bad: scheduling while atomic!
Call Trace:
[<c0117064>] schedule+0x3a4/0x3b0
[<c0117349>] wait_for_completion+0x99/0xe0
[<c01170c0>] default_wake_function+0x0/0x20
[<c01170c0>] default_wake_function+0x0/0x20
[<c023b15e>] scsi_wait_req+0x7e/0xb0
[<c023b050>] scsi_wait_done+0x0/0x90
[<c023cf5c>] scsi_probe_lun+0x6c/0x200
[<c023d38b>] scsi_probe_and_add_lun+0x7b/0x130
[<c023d64c>] scsi_scan_target+0x5c/0x100
[<c023d741>] scsi_scan_host+0x51/0x90
[<c023798d>] scsi_add_host+0x4d/0x90
[<c0237dac>] scsi_register_host+0x6c/0xc0
[<c01295df>] init_workqueues+0xf/0x30
[<c01050a3>] init+0x33/0x190
[<c0105070>] init+0x0/0x190
[<c01071dd>] kernel_thread_helper+0x5/0x18
bad: scheduling while atomic!
Call Trace:
[<c0117064>] schedule+0x3a4/0x3b0
[<c0117349>] wait_for_completion+0x99/0xe0
[<c01170c0>] default_wake_function+0x0/0x20
[<c01170c0>] default_wake_function+0x0/0x20
[<c023b15e>] scsi_wait_req+0x7e/0xb0
[<c023b050>] scsi_wait_done+0x0/0x90
[<c023cf5c>] scsi_probe_lun+0x6c/0x200
[<c023d38b>] scsi_probe_and_add_lun+0x7b/0x130
[<c023d64c>] scsi_scan_target+0x5c/0x100
[<c023d741>] scsi_scan_host+0x51/0x90
[<c023798d>] scsi_add_host+0x4d/0x90
[<c0237dac>] scsi_register_host+0x6c/0xc0
[<c01295df>] init_workqueues+0xf/0x30
[<c01050a3>] init+0x33/0x190
[<c0105070>] init+0x0/0x190
[<c01071dd>] kernel_thread_helper+0x5/0x18
bad: scheduling while atomic!
Call Trace:
[<c0117064>] schedule+0x3a4/0x3b0
[<c0117349>] wait_for_completion+0x99/0xe0
[<c01170c0>] default_wake_function+0x0/0x20
[<c01170c0>] default_wake_function+0x0/0x20
[<c023b15e>] scsi_wait_req+0x7e/0xb0
[<c023b050>] scsi_wait_done+0x0/0x90
[<c023cf5c>] scsi_probe_lun+0x6c/0x200
[<c023d38b>] scsi_probe_and_add_lun+0x7b/0x130
[<c023d64c>] scsi_scan_target+0x5c/0x100
[<c023d741>] scsi_scan_host+0x51/0x90
[<c023798d>] scsi_add_host+0x4d/0x90
[<c0237dac>] scsi_register_host+0x6c/0xc0
[<c01295df>] init_workqueues+0xf/0x30
[<c01050a3>] init+0x33/0x190
[<c0105070>] init+0x0/0x190
[<c01071dd>] kernel_thread_helper+0x5/0x18
bad: scheduling while atomic!
Call Trace:
[<c0117064>] schedule+0x3a4/0x3b0
[<c0117349>] wait_for_completion+0x99/0xe0
[<c01170c0>] default_wake_function+0x0/0x20
[<c01170c0>] default_wake_function+0x0/0x20
[<c023b15e>] scsi_wait_req+0x7e/0xb0
[<c023b050>] scsi_wait_done+0x0/0x90
[<c023cf5c>] scsi_probe_lun+0x6c/0x200
[<c023d38b>] scsi_probe_and_add_lun+0x7b/0x130
[<c023d64c>] scsi_scan_target+0x5c/0x100
[<c023d741>] scsi_scan_host+0x51/0x90
[<c023798d>] scsi_add_host+0x4d/0x90
[<c0237dac>] scsi_register_host+0x6c/0xc0
[<c01295df>] init_workqueues+0xf/0x30
[<c01050a3>] init+0x33/0x190
[<c0105070>] init+0x0/0x190
[<c01071dd>] kernel_thread_helper+0x5/0x18
bad: scheduling while atomic!
Call Trace:
[<c0117064>] schedule+0x3a4/0x3b0
[<c0117349>] wait_for_completion+0x99/0xe0
[<c01170c0>] default_wake_function+0x0/0x20
[<c01170c0>] default_wake_function+0x0/0x20
[<c023b15e>] scsi_wait_req+0x7e/0xb0
[<c023b050>] scsi_wait_done+0x0/0x90
[<c023cf5c>] scsi_probe_lun+0x6c/0x200
[<c023d38b>] scsi_probe_and_add_lun+0x7b/0x130
[<c023d64c>] scsi_scan_target+0x5c/0x100
[<c023d741>] scsi_scan_host+0x51/0x90
[<c023798d>] scsi_add_host+0x4d/0x90
[<c0237dac>] scsi_register_host+0x6c/0xc0
[<c01295df>] init_workqueues+0xf/0x30
[<c01050a3>] init+0x33/0x190
[<c0105070>] init+0x0/0x190
[<c01071dd>] kernel_thread_helper+0x5/0x18
bad: scheduling while atomic!
Call Trace:
[<c0117064>] schedule+0x3a4/0x3b0
[<c0117349>] wait_for_completion+0x99/0xe0
[<c01170c0>] default_wake_function+0x0/0x20
[<c01170c0>] default_wake_function+0x0/0x20
[<c023b15e>] scsi_wait_req+0x7e/0xb0
[<c023b050>] scsi_wait_done+0x0/0x90
[<c023cf5c>] scsi_probe_lun+0x6c/0x200
[<c023d38b>] scsi_probe_and_add_lun+0x7b/0x130
[<c023d64c>] scsi_scan_target+0x5c/0x100
[<c023d741>] scsi_scan_host+0x51/0x90
[<c023798d>] scsi_add_host+0x4d/0x90
[<c0237dac>] scsi_register_host+0x6c/0xc0
[<c01295df>] init_workqueues+0xf/0x30
[<c01050a3>] init+0x33/0x190
[<c0105070>] init+0x0/0x190
[<c01071dd>] kernel_thread_helper+0x5/0x18
bad: scheduling while atomic!
Call Trace:
[<c0117064>] schedule+0x3a4/0x3b0
[<c0117349>] wait_for_completion+0x99/0xe0
[<c01170c0>] default_wake_function+0x0/0x20
[<c01170c0>] default_wake_function+0x0/0x20
[<c023b15e>] scsi_wait_req+0x7e/0xb0
[<c023b050>] scsi_wait_done+0x0/0x90
[<c023cf5c>] scsi_probe_lun+0x6c/0x200
[<c023d38b>] scsi_probe_and_add_lun+0x7b/0x130
[<c023d64c>] scsi_scan_target+0x5c/0x100
[<c023d741>] scsi_scan_host+0x51/0x90
[<c023798d>] scsi_add_host+0x4d/0x90
[<c0237dac>] scsi_register_host+0x6c/0xc0
[<c01295df>] init_workqueues+0xf/0x30
[<c01050a3>] init+0x33/0x190
[<c0105070>] init+0x0/0x190
[<c01071dd>] kernel_thread_helper+0x5/0x18
bad: scheduling while atomic!
Call Trace:
[<c0117064>] schedule+0x3a4/0x3b0
[<c0117349>] wait_for_completion+0x99/0xe0
[<c01170c0>] default_wake_function+0x0/0x20
[<c01170c0>] default_wake_function+0x0/0x20
[<c023b15e>] scsi_wait_req+0x7e/0xb0
[<c023b050>] scsi_wait_done+0x0/0x90
[<c023d074>] scsi_probe_lun+0x184/0x200
[<c023d38b>] scsi_probe_and_add_lun+0x7b/0x130
[<c023d64c>] scsi_scan_target+0x5c/0x100
[<c023d741>] scsi_scan_host+0x51/0x90
[<c023798d>] scsi_add_host+0x4d/0x90
[<c0237dac>] scsi_register_host+0x6c/0xc0
[<c01295df>] init_workqueues+0xf/0x30
[<c01050a3>] init+0x33/0x190
[<c0105070>] init+0x0/0x190
[<c01071dd>] kernel_thread_helper+0x5/0x18
Vendor: IOMEGA Model: ZIP 100 Rev: D.13
Type: Direct-Access ANSI SCSI revision: 02
bad: scheduling while atomic!
Call Trace:
[<c0117064>] schedule+0x3a4/0x3b0
[<c0117349>] wait_for_completion+0x99/0xe0
[<c01170c0>] default_wake_function+0x0/0x20
[<c01170c0>] default_wake_function+0x0/0x20
[<c023b15e>] scsi_wait_req+0x7e/0xb0
[<c023b050>] scsi_wait_done+0x0/0x90
[<c023c7ef>] scsi_get_evpd_page+0x7f/0x120
[<c023ce2e>] scsi_load_identifier+0x2e/0xf0
[<c023d248>] scsi_add_lun+0x158/0x220
[<c023d3b9>] scsi_probe_and_add_lun+0xa9/0x130
[<c023d64c>] scsi_scan_target+0x5c/0x100
[<c023d741>] scsi_scan_host+0x51/0x90
[<c023798d>] scsi_add_host+0x4d/0x90
[<c0237dac>] scsi_register_host+0x6c/0xc0
[<c01295df>] init_workqueues+0xf/0x30
[<c01050a3>] init+0x33/0x190
[<c0105070>] init+0x0/0x190
[<c01071dd>] kernel_thread_helper+0x5/0x18
bad: scheduling while atomic!
Call Trace:
[<c0117064>] schedule+0x3a4/0x3b0
[<c0128db4>] queue_work+0x84/0xa0
[<c02402f5>] ppa_queuecommand+0x95/0xa0
[<c0117349>] wait_for_completion+0x99/0xe0
[<c01170c0>] default_wake_function+0x0/0x20
[<c023c002>] scsi_request_fn+0x172/0x230
[<c01170c0>] default_wake_function+0x0/0x20
[<c023b15e>] scsi_wait_req+0x7e/0xb0
[<c023b050>] scsi_wait_done+0x0/0x90
[<c023cc43>] scsi_get_serialnumber+0x93/0x1b0
[<c023c852>] scsi_get_evpd_page+0xe2/0x120
[<c023ceeb>] scsi_load_identifier+0xeb/0xf0
[<c023d248>] scsi_add_lun+0x158/0x220
[<c023d3b9>] scsi_probe_and_add_lun+0xa9/0x130
[<c023d64c>] scsi_scan_target+0x5c/0x100
[<c023d741>] scsi_scan_host+0x51/0x90
[<c023798d>] scsi_add_host+0x4d/0x90
[<c0237dac>] scsi_register_host+0x6c/0xc0
[<c01295df>] init_workqueues+0xf/0x30
[<c01050a3>] init+0x33/0x190
[<c0105070>] init+0x0/0x190
[<c01071dd>] kernel_thread_helper+0x5/0x18
bad: scheduling while atomic!
Call Trace:
[<c0117064>] schedule+0x3a4/0x3b0
[<c0117349>] wait_for_completion+0x99/0xe0
[<c01170c0>] default_wake_function+0x0/0x20
[<c01170c0>] default_wake_function+0x0/0x20
[<c023b15e>] scsi_wait_req+0x7e/0xb0
[<c023b050>] scsi_wait_done+0x0/0x90
[<c023cf5c>] scsi_probe_lun+0x6c/0x200
[<c023d38b>] scsi_probe_and_add_lun+0x7b/0x130
[<c023d64c>] scsi_scan_target+0x5c/0x100
[<c023d741>] scsi_scan_host+0x51/0x90
[<c023798d>] scsi_add_host+0x4d/0x90
[<c0237dac>] scsi_register_host+0x6c/0xc0
[<c01295df>] init_workqueues+0xf/0x30
[<c01050a3>] init+0x33/0x190
[<c0105070>] init+0x0/0x190
[<c01071dd>] kernel_thread_helper+0x5/0x18
error in initcall at 0xc0391ad0: returned with preemption imbalance
Attached scsi removable disk sda at scsi0, channel 0, id 6, lun 0
next reply other threads:[~2003-04-12 14:49 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-04-12 15:03 Gert Vervoort [this message]
2003-04-12 18:28 ` 2.5.67: ppa driver & preempt == oops Robert Love
2003-04-13 10:30 ` Gert Vervoort
2003-04-13 17:32 ` Robert Love
2003-04-13 17:44 ` Gert Vervoort
2003-04-15 19:00 ` [PATCH] " Patrick Mansfield
2003-04-15 20:44 ` Gert Vervoort
2003-04-15 21:40 ` Patrick Mansfield
2003-04-16 17:52 ` Gert Vervoort
2003-04-16 18:05 ` Patrick Mansfield
2003-04-16 19:45 ` Gert Vervoort
2003-04-16 20:07 ` Mike Anderson
2003-04-16 18:03 ` Gert Vervoort
2003-04-15 21:37 ` Robert Love
2003-04-15 21:51 ` Randy.Dunlap
2003-04-15 22:07 ` Patrick Mansfield
2003-04-15 22:29 ` Randy.Dunlap
2003-04-15 22:35 ` Patrick Mansfield
2003-04-12 21:12 ` Andrew Morton
2003-04-13 11:45 ` Gert Vervoort
2003-04-13 20:44 ` Andrew Morton
[not found] <fa.e0puan3.1f34a3p@ifi.uio.no>
[not found] ` <fa.h6rb9ej.ml8qhn@ifi.uio.no>
2003-04-13 19:52 ` walt
[not found] <20030413201011$1026@gated-at.bofh.it>
[not found] ` <20030413201011$250d@gated-at.bofh.it>
[not found] ` <20030413201011$5dde@gated-at.bofh.it>
2003-04-14 4:17 ` Tim Connors
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3E982AAC.3060606@hccnet.nl \
--to=gert.vervoort@hccnet.nl \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.