From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?Peter_Lund=E9n?= Subject: Re: HDSP 96/52 Date: Tue, 29 Apr 2003 09:00:28 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <3EAE230C.7050509@tii.se> References: <20030427080603.GB641@always.joy.eth.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Joshua N Pritikin Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org I have a HDSP with multiface on my laptop. I know this is not exactly the same but I think the drivers share alot of code. I have experience problems with the matrix mixer. It does not seam to be stable, after rebooting it works sometime and sometimes not. I have not been able to figure out any pattern in the behavior yet. --PLu Joshua N Pritikin wrote: >Mark Knecht wrote: > > >>I'm getting a lot of reasonable or even good results, but no actual >>audio unfortunately. >> >> > >Me too. The driver loads fine. hdspconf works great. My A/D >converter is happy. i tried running the following script to >set all the mixer levels to unity. > >for dest in $(seq 0 26);do > for i in $(seq 0 51);do > amixer cset numid=5 $i,$dest 32768 > /dev/null; > done >done > >However, i've never gotten any audio through the card. Only silence. >If there is any patch available then i'm happy to test it. > > > ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf