From: Dominik.Strasser@t-online.de (Dominik Strasser)
To: linux-kernel@vger.kernel.org
Subject: Bootsector corruption
Date: Thu, 01 May 2003 12:44:40 +0200 [thread overview]
Message-ID: <3EB0FA98.2080508@t-online.de> (raw)
Hi,
I experience the following problem which occurs randomly.
After a reboot, the Bootsector is often corrupted. The errors reported
by lilo differ.
Today I had 99 (invalid second stage index sector).
The problem occurs both on cold and on warm boots.
Re-installing lilo helps (until the next corruption).
I have a 2.4.20 kernel but the probelem occurs since many kernel revisions.
My MoBo is a Gigabyte GA-5AA which is an AT sized ATX board with an ATX
power supply. It has an ALI1543 chipset.
APM is active, ACPI isn't.
The relevant boot messages are:
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller on PCI bus 00 dev 78
PCI: No IRQ known for interrupt pin A of device 00:0f.0. Please try
using pci=biosirq.
ALI15X3: chipset revision 193
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: IBM-DJNA-351520, ATA DISK drive
hdc: JLMS XJ-HD165H, ATAPI CD/DVD-ROM drive
hdd: LITE-ON LTR-48246S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c03781c4, I/O limit 4095Mb (mask 0xffffffff)
hda: 30033360 sectors (15377 MB) w/430KiB Cache, CHS=1869/255/63, UDMA(33)
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.12
The CD burner is used via ide-scsi:
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: LITE-ON Model: LTR-48246S Rev: SS0C
Type: CD-ROM ANSI SCSI revision: 02
which seems to have some (small) problems which do not affect the
functionality (burning works flawlessly):
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 64
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 66
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 68
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 70
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 72
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 74
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 76
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 78
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 64
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 66
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 68
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 70
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 72
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 74
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 76
ide-scsi: hdd: unsupported command in request queue (0)
end_request: I/O error, dev 16:40 (hdd), sector 78
cdrom: open failed.
Any help is greatly appreciated.
Regards
Dominik
next reply other threads:[~2003-05-01 10:30 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-01 10:44 Dominik Strasser [this message]
2003-05-01 10:55 ` Bootsector corruption John Bradford
[not found] ` <1051790436.16621.8.camel@localhost>
2003-05-01 14:18 ` Dominik Strasser
-- strict thread matches above, loose matches on Subject: below --
2003-05-06 18:31 Unai Garro Arrazola
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3EB0FA98.2080508@t-online.de \
--to=dominik.strasser@t-online.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.