From mboxrd@z Thu Jan 1 00:00:00 1970 From: John Subject: Age and the art of making a EXT3 File System Kernel Date: Sun, 04 May 2003 14:29:04 -0700 Sender: linux-hams-owner@localhost Message-ID: <3EB58620.2010309@pacbell.net> Mime-Version: 1.0 Content-Transfer-Encoding: 7BIT Return-path: List-Id: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: linux-hams@vger.kernel.org Gaddsss, I really must be aging. I have successfully built a working EXT3 kernel in the past and have forgotten the requirements. I have selected in the "file systems" Yes for the ext2 and Module for the ext3 journal file systems. There is something else in the back of my mind that saying that I am missing something. Currently the attempts that I have built do a kernel panic right at the point where it mounts the root partition. LABEL=/ "cant be found". I have tried both module and hard select for the ext3 file systems with the same results. I am using RH8.0 with formatted scsi ext3 file system. The canned 2.4.18-14 loads just fine but it lacks the dmascc0 drivers that I need to ax25. I was attempting to build a 2.4.19 smp kernel. Could some kind sole refresh my memory with the ext3 file system requirements. Thank you in advance. John