Re: [2.4.21-rc1] Zipdrive messages too much

[David van Hoose <davidvh@cox.net>]

Bill Davidsen wrote:
> On Wed, 23 Apr 2003, David van Hoose wrote:
>>Apr 23 11:41:35 aeon kernel: sda : READ CAPACITY failed.
>>Apr 23 11:41:35 aeon kernel: sda : status = 1, message = 00, host = 0, 
>>driver = 08
>>Apr 23 11:41:35 aeon kernel: Current sd00:00: sns = 70  2
>>Apr 23 11:41:35 aeon kernel: ASC=3a ASCQ= 0
>>Apr 23 11:41:35 aeon kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 
>>0x00 0x00 0x11 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 0xff 
>>0xfe 0x01 0x00 0x00 0x00 0x00
>>Apr 23 11:41:35 aeon kernel: sda : block size assumed to be 512 bytes, 
>>disk size 1GB.
>>Apr 23 11:41:35 aeon kernel: sda: Write Protect is off
>>Apr 23 11:41:35 aeon kernel:  sda: I/O error: dev 08:00, sector 0
>>Apr 23 11:41:35 aeon kernel:  I/O error: dev 08:00, sector 0
>>Apr 23 11:41:35 aeon kernel:  unable to read partition table
>>Apr 23 11:41:35 aeon kernel: Device not ready.  Make sure there is a 
>>disc in the drive.

I added more SCSI logging support so the below is better info than the 
above. Sorry. Forgot the logging when I posted this. I knew it looked 
extra weird.

sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sense key Not Ready
Additional sense indicates Medium not present
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: Write Protect is off
  sda: I/O error: dev 08:00, sector 0
  I/O error: dev 08:00, sector 0
  unable to read partition table
Device not ready.  Make sure there is a disc in the drive.

Hope this helps more.

Thanks,
David