From mboxrd@z Thu Jan 1 00:00:00 1970 From: d Subject: Re: hdsp9652+alsamixer -> kernel panic Date: Thu, 29 May 2003 19:22:45 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <3ED641E5.5020108@klingt.org> References: <200305291709.h4TH9WqU004638@klingt.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <200305291709.h4TH9WqU004638@klingt.org> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Paul Davis , alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org ok, thanks for your patience with my case. inbetween i have been able to 1) get another kernel panic with the new kernel+drivers 2) sometimes get some noise with a self-written testtone-prog on channel 3 and/or 6 of adat1 (*should* be a sinewave on all 26 channels). could it be that the S32_LE noninterleaved is interpreted wrong? 4) once got jack+ardour to produce noise (*should* have been music), but couldn't repoduce this seems i'll have to find some other hardware if i want a quick solution regards d13b Paul Davis wrote: >>sorry for all the noise on the list. >>i am running a singleprocessor system, but forgot to turn off the smp >>support in the kernel config. now - after recompiling everything- the >>kernel doesn't panic any more when i adjust the output-levels, but i >>still get nothing but silence from my card. > > > oh dear. now i realize that i didn't read your subject line carefully > enough. > > the hdsp 9652 driver has one major issue at this time. i have been in > lots of contact with RME to get the problem resolved, but they have > not followed through on the most recent requests. the driver is not > setting the card up so that you can hear anything, even though it does > actually run quite normally. nobody (myself, thomas or anyone else) > knows what might be wrong, and RME have told me that in theory nothing > is necessary to make this work: by default, the hdsp9652 works just > like the old hammerfall (i.e. playback stream N is routed at unity > gain to output stream N). so, we are basically waiting for RME to > respond in some way. it will probably turn out to be a one or two line > change. i wish i could tell you when it will happen, but that would be > dishonest. > > --p ------------------------------------------------------- This SF.net email is sponsored by: eBay Get office equipment for less on eBay! http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5