From: Yoann <linux-yoann@ifrance.com>
To: linux-kernel@vger.kernel.org
Subject: Kernel 2.5.70 compilation fails
Date: Sun, 01 Jun 2003 17:41:46 +0200 [thread overview]
Message-ID: <3EDA1EBA.9020005@ifrance.com> (raw)
[1.] One line summary of the problem:
The compilation of the kernel 2.5.70 fails
[2.] Full description of the problem/report:
While making the bzImage with initrd option, the process exits with the
following messages:
....
scripts/fixdep scripts/.empty.o.d scripts/empty.o 'gcc
-Wp,-MD,scripts/.empty.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes
-Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe
-mpreferred-stack-boundary=2 -march=pentium3 -Iinclude/asm-i386/mach-default
-nostdinc -iwithprefix include -DKBUILD_BASENAME=empty
-DKBUILD_MODNAME=empty -c -o scripts/.tmp_empty.o scripts/empty.c' >
scripts/.empty.o.tmp; rm -f scripts/.empty.o.d; mv -f scripts/.empty.o.tmp
scripts/.empty.o.cmd
MKELF scripts/elfconfig.h
HOSTCC scripts/file2alias.o
HOSTCC scripts/modpost.o
HOSTLD scripts/modpost
SPLIT include/linux/autoconf.h -> include/config/*
make[2]: `arch/i386/kernel/asm-offsets.s' is up to date.
Starting the build. KBUILD_BUILTIN=1 KBUILD_MODULES=
CHK include/linux/compile.h
make[3]: *** No rule to make target `drivers/ide/ide-geometry.s', needed by
`drivers/ide/ide-geometry.o'. Stop.
make[2]: *** [drivers/ide] Error 2
make[1]: *** [drivers] Error 2
make[1]: Leaving directory `/usr/src/kernel-source-2.5.70'
[3.] Keywords (i.e., modules, networking, kernel):
--bzimage --initrd kernel_image
[4.] Kernel version (from /proc/version):
Linux version 2.4.20 (root@von) (gcc version 3.2.3 20030415 (Debian
prerelease)) #1 SMP lun mai 19 20:32:10 CEST 2003
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
no oops seen
[6.] A small shell script or example program which triggers the
problem (if possible)
make-kpkg --bzImage --initrd
[7.] Environment
Debian testing distribution - bash shell - gcc 3.2.3
[7.1.] Software (add the output of the ver_linux script here)
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux bolidino 2.4.20 #1 SMP Thu May 29 23:45:20 CEST 2003 i686 GNU/Linux
Gnu C 3.3
Gnu make 3.80
util-linux 2.11z-1
mount 2.11z-1
module-init-tools 2.4.21
e2fsprogs 1.32P-2
PPP 2.4.1
Linux C Library 2.3.1-16
Procps 3.1.8-1
Net-tools 1.60-4.1
Console-tools 0.2.3
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Celeron (Mendocino)
stepping : 5
cpu MHz : 551.266
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx fxsr
bogomips : 1101.00
[7.3.] Module information (from /proc/modules):
usb-ohci 19976 0 (unused)
loop 9912 0 (unused)
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(set)
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
4000-40ff : PCI CardBus #02
4400-44ff : PCI CardBus #02
a000-afff : PCI Bus #01
ac80-acff : Silicon Integrated Systems [SiS] SiS630 GUI Accelerator+3D
d000-d0ff : Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet
d000-d0ff : sis900
d400-d4ff : Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator
d400-d4ff : SiS 7018 PCI Audio
d800-d87f : Silicon Integrated Systems [SiS] 56k Winmodem (Smart Link HAMR5600
compatible)
dc00-dcff : Silicon Integrated Systems [SiS] 56k Winmodem (Smart Link HAMR5600
compatible)
ff00-ff0f : Silicon Integrated Systems [SiS] 5513 [IDE]
ff00-ff07 : ide0
ff08-ff0f : ide1
=====
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0dfeffff : System RAM
00100000-0039aa3f : Kernel code
0039aa40-00466863 : Kernel data
0dff0000-0dff7fff : ACPI Tables
0dff8000-0dffffff : ACPI Non-volatile Storage
10000000-10000fff : O2 Micro, Inc. OZ6812 Cardbus Controller
10400000-107fffff : PCI CardBus #02
10800000-10bfffff : PCI CardBus #02
cfc00000-dfcfffff : PCI Bus #01
d0000000-d7ffffff : Silicon Integrated Systems [SiS] SiS630 GUI Accelerator+3D
d0000000-d1ffffff : sisfb FB
dfe00000-dfefffff : PCI Bus #01
dfee0000-dfefffff : Silicon Integrated Systems [SiS] SiS630 GUI Accelerator+3D
dfee0000-dfefffff : sisfb MMIO
dffc0000-dffc0fff : Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet
dffc0000-dffc0fff : sis900
dffd0000-dffd0fff : Silicon Integrated Systems [SiS] 7001
dffd0000-dffd0fff : usb-ohci
dffe0000-dffe0fff : Silicon Integrated Systems [SiS] 7001 (#2)
dffe0000-dffe0fff : usb-ohci
dfff0000-dfff0fff : Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator
e0000000-e3ffffff : Silicon Integrated Systems [SiS] 630 Host
ffef0000-ffefffff : reserved
ffff0000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 31)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+
AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=x4
00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
(prog-if 80 [Master])
Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 16
Region 4: I/O ports at ff00 [size=16]
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100
Ethernet (rev 82)
Subsystem: Uniwill Computer Corp: Unknown device 5002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at d000 [size=256]
Region 1: Memory at dffc0000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at dffa0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=160mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.2 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB
Controller (rev 07) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] SiS7001 USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), cache line size 08
Interrupt: pin D routed to IRQ 9
Region 0: Memory at dffd0000 (32-bit, non-prefetchable) [size=4K]
00:01.3 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB
Controller (rev 07) (prog-if 10 [OHCI])
Subsystem: Silicon Integrated Systems [SiS] Onboard USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), cache line size 08
Interrupt: pin D routed to IRQ 9
Region 0: Memory at dffe0000 (32-bit, non-prefetchable) [size=4K]
00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI
Audio Accelerator (rev 02)
Subsystem: Uniwill Computer Corp: Unknown device 5002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at d400 [size=256]
Region 1: Memory at dfff0000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.6 Modem: Silicon Integrated Systems [SiS] Intel 537 [56k Winmodem] (rev
a0) (prog-if 00 [Generic])
Subsystem: Uniwill Computer Corp: Unknown device 4003
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at dc00 [size=256]
Region 1: I/O ports at d800 [size=128]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.0 PCI bridge: Silicon Integrated Systems [SiS] SiS 530 Virtual
PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: dfe00000-dfefffff
Prefetchable memory behind bridge: cfc00000-dfcfffff
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00:03.0 CardBus bridge: O2 Micro, Inc. OZ6812 Cardbus Controller (rev 05)
Subsystem: Uniwill Computer Corp: Unknown device 3000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 10400000-107ff000 (prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] SiS630 GUI
Accelerator+3D (rev 31) (prog-if 00 [VGA])
Subsystem: Uniwill Computer Corp: Unknown device 5002
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
BIST result: 00
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at dfee0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at ac80 [size=128]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] AGP version 2.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW-
AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
[7.6.] SCSI information (from /proc/scsi/scsi)
cat: /proc/scsi/scsi: No such file or directory
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
[X.] Other notes, patches, fixes, workarounds:
the ue of gcc-2.95 in place of gcc-3.2 did not help.
[Y.] .Other file
.config for kernel 2.4.20
http://file.mistur.org/config-2.4.20
.config used for compilation
http://file.mistur.org/config-2.5.70
complet stdout
http://file.mistur.org/stdout_kernel_compil.log
complet stderr
http://file.mistur.org/stderr_kernel_compil.log
[Z.] Other stuff
It's the first time I try to compile a kernel 2.5.X and it's the first time I
submit a bug repport, so I use an older bug report and change with my
own information. If there is anything wrong don't hesitate to send me an
email. I don't think there already is a bug report for this bug, if not sorry...
I'm french and my english is not perfect, sorry for all mistakes
Yoann
next reply other threads:[~2003-06-01 15:28 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-06-01 15:41 Yoann [this message]
2003-06-01 17:31 ` Kernel 2.5.70 compilation fails Stewart Smith
2003-06-01 21:34 ` Yoann
-- strict thread matches above, loose matches on Subject: below --
2003-05-30 21:32 Fabio Bracci
2003-05-30 22:27 ` Adrian Bunk
2003-06-20 21:04 ` Fabio Bracci
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3EDA1EBA.9020005@ifrance.com \
--to=linux-yoann@ifrance.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.