From: Peter Ryser <Peter.Ryser@xilinx.com>
To: NARI_DHY <nari_dhy@nari-china.com>
Cc: Peter Ryser <Peter.Ryser@xilinx.com>,
linuxppc-embedded <linuxppc-embedded@lists.linuxppc.org>
Subject: Re: bootstrap of virtex-ii pro eval board ML300
Date: Thu, 05 Jun 2003 08:16:41 -0700 [thread overview]
Message-ID: <3EDF5ED9.9C5A46AF@xilinx.com> (raw)
In-Reply-To: 001101c32b21$1bb5f2d0$4c44900a@hydingnb
System ACE CF.
- Peter
NARI_DHY wrote:
> > As Scott describes correctly the preferred method of booting ML300 is through
> > System ACE CF. System ACE CF reads ACE files and programs the FPGA and the
> > PowerPC processor through the JTAG chain.
> System ACE CF reads one of the .ace files (at most 8) from the first partition of FAT16/FAT12 fs.
>
> > On power-up or reset System ACE CF reads the ACE file from the MicroDrive or
> > CompactFlash card and in a first step programs the FPGA. Then, in a second
> > step, from the same ACE file, it programs the processor, i.e. similar to an
> > external debugger it loads code and data contained in the ELF file into the
> > processor memories, sets the PC to the start address, and starts executing the
> > program.
> >
> what is this "it"? Is it System ACE CF or other small executive edited by developper?
>
> -hyding
>
> best regards
>
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next prev parent reply other threads:[~2003-06-05 15:16 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-06-02 20:48 bootstrap of virtex-ii pro eval board ML300 Kerl, John
2003-06-02 20:53 ` Scott Anderson
2003-06-04 16:45 ` Peter Ryser
2003-06-05 5:12 ` NARI_DHY
2003-06-05 15:16 ` Peter Ryser [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-06-02 20:52 Kerl, John
2003-06-02 20:41 Kerl, John
2003-06-02 20:49 ` Scott Anderson
2003-06-01 1:14 丁厚永
2003-06-02 20:36 ` Scott Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3EDF5ED9.9C5A46AF@xilinx.com \
--to=peter.ryser@xilinx.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
--cc=nari_dhy@nari-china.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.