From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.medianet-world.de (mail1.medianet-world.de [213.157.0.162]) by dsl2.external.hp.com (Postfix) with SMTP id A4448483E for ; Sun, 22 Jun 2003 04:03:34 -0600 (MDT) Message-ID: <3EF57F2C.4060509@bluehash.de> Date: Sun, 22 Jun 2003 12:04:28 +0200 From: =?ISO-8859-15?Q?R=FCdiger_Scholz?= MIME-Version: 1.0 To: parisc-linux@lists.parisc-linux.org Subject: Re: [parisc-linux] Some 2.5-testing References: <3EEF3C94.3080300@bluehash.de> In-Reply-To: <3EEF3C94.3080300@bluehash.de> Content-Type: multipart/mixed; boundary="------------040504060700030405030907" Sender: parisc-linux-admin@lists.parisc-linux.org Errors-To: parisc-linux-admin@lists.parisc-linux.org List-Help: List-Post: List-Subscribe: , List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: This is a multi-part message in MIME format. --------------040504060700030405030907 Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 8bit Hi there, sorry for the delay, but it took some time to get beck to my HP and built an new kernel. With disabled HIL-Support I get a working kernel. Bootlog is attached. So I would like to say thank you for the great job you all do. I just recognized two failures. One is: "Setting up general console font...set_kernel_font: Function not implemented" during an init-script and the other is this: "gsckbd_leds: timeout". If I can help to test patches to get HIL-Support working let me know. Greetings, Rüdiger --------------040504060700030405030907 Content-Type: text/plain; name="gandalf-2.5.72-pa1-3.log" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="gandalf-2.5.72-pa1-3.log" ---------------------------------------------------------------------------- BootRom Version 1.6 Memory Size: 128 MB ---------------------------------------------------------------------------- (c) Copyright 1990-1994, Hewlett-Packard Company. All rights reserved Press to stop boot sequence. ---------------------------------------------------------------------------- Command Description ------- ----------- Auto [boot|search] [on|off] Set/show auto mode Boot [pri|alt [isl]] Boot from primary or alternate path Boot [scsi|eisa.[.]] [isl] Boot from SCSI or EISA Boot lan[.] [install] [isl] Boot from LAN Chassis [on|off] Set/show chassis codes display mode DefaultSS Reboot and set EEPROM to default values Diagnostic [on|off] Set/show diagnostic boot mode Fastboot [on|off] Set/show fast boot mode Help Show this command menu Information Show system information LanAddress Show LAN station addresses Monitor [[.]] Set/show graphics monitor type (=graphics|graphics_<1|2>) Path [pri|alt [[.]]] Set/show boot source path (=lan|scsi|eisa.) Path [console [[.]]] Set/show boot console path (=| =rs232|rs232_2 =.. =graphics|graphics_<1|2> =) Path [keyboard [hil|ps2]] Set/show boot keyboard path Pim [hpmc|toc|lpmc] Show PIM info Search [ipl] [scsi|eisa] Show potential boot devices Search [ipl] [lan [install]] Show potential boot LAN devices Secure [on|off] Set/show security mode ---------------------------------------------------------------------------- BOOT_ADMIN> bo pri ipl Attempting to boot. Loading Initial Program Loader IPL successfully loaded Booting palo ipl 1.2 root@b2000 Tue Jan 14 13:13:07 MST 2003 Partition Start(MB) End(MB) Id Type 1 1 22 f0 Palo 2 23 64 83 ext2 3 65 194 82 swap 4 195 2046 83 ext2 PALO(F0) partition contains: 0/vmlinux32 3223985 bytes @ 0x48000 Information: No console specified on kernel command line. This is normal. PALO will choose the console currently used by firmware (serial).Current command line: 2/vmlinux root=/dev/sda4 HOME=/ devfs=mount console=ttyS0 TERM=vt102 0: 2/vmlinux 1: root=/dev/sda4 2: HOME=/ 3: devfs=mount 4: console=ttyS0 5: TERM=vt102 Edit which field? (or 'b' to boot with this command line)? 0 b 0 2/vmlinux-2.5.72-pa1 Current command line: 2/vmlinux-2.5.72-pa1 root=/dev/sda4 HOME=/ devfs=mount console=ttyS0 TERM=vt102 0: 2/vmlinux-2.5.72-pa1 1: root=/dev/sda4 2: HOME=/ 3: devfs=mount 4: console=ttyS0 5: TERM=vt102 Edit which field? (or 'b' to boot with this command line)? 0b  b Command line for kernel: 'root=/dev/sda4 HOME=/ devfs=mount console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux-2.5.72-pa1' Selected kernel: /vmlinux-2.5.72-pa1 from partition 2 ELF32 executable Entry 00100000 first 00100000 n 3 Segment 0 load 00100000 size 2325984 mediaptr 0x1000 Segment 1 load 00338000 size 463048 mediaptr 0x239000 Segment 2 load 003ac000 size 524416 mediaptr 0x2ab000 Branching to kernel entry point 0x00100000. If this is the last message you see, you may need to switch your console. This is a common symptom -- search the FAQ and mailing list at parisc-linux.org Linux version 2.5.72-pa1 (ruediger@gandalf) (gcc version 3.0.4) #2 Fri Jun 20 20:56:57 CEST 2003 FP[0] enabled: Rev 1 Model 13 The 32-bit Kernel has started... Determining PDC firmware type: Snake. model 000060b0 00000481 00000000 00000000 77b661a7 00000000 00000004 00000072 00000072 vers 0000000b model 9000/715 Total Memory: 128 Mb pagetable_init On node 0 totalpages: 32768 DMA zone: 32768 pages, LIFO batch:8 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 Building zonelist for node : 0 Kernel command line: root=/dev/sda4 HOME=/ devfs=mount console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux-2.5.72-pa1 PID hash table entries: 16 (order 4: 128 bytes) Console: colour dummy device 160x64 Calibrating delay loop... 99.73 BogoMIPS Memory: 126144k available Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root POSIX conformance testing by UNIFIX Initializing RT netlink socket EISA bus registered Searching for devices... Found devices: 1. Coral SGC Graphics (10) at 0xf4000000 [0], versions 0x4, 0x0, 0x77 2. Mirage GSC Builtin Graphics (10) at 0xf8000000 [1], versions 0x13, 0x0, 0x85 3. Mirage Core BA (11) at 0xf0100000 [2], versions 0x29, 0x0, 0x81 4. Mirage Core SCSI (10) at 0xf0106000 [2/0/1], versions 0x29, 0x0, 0x82 5. Mirage Core LAN (802.3) (10) at 0xf0107000 [2/0/2], versions 0x29, 0x0, 0x8a 6. Mirage Core RS-232 (10) at 0xf0105000 [2/0/4], versions 0x29, 0x0, 0x8c 7. Mirage Core Centronics (10) at 0xf0102000 [2/0/6], versions 0x29, 0x0, 0x74 8. Mirage Audio (10) at 0xf0104000 [2/0/8], versions 0x29, 0x0, 0x7b 9. Mirage Core PC Floppy (10) at 0xf010a000 [2/0/10], versions 0x29, 0x0, 0x83 10. Mirage Core PS/2 Port (10) at 0xf0108000 [2/0/11], versions 0x29, 0x0, 0x84 11. Mirage Core PS/2 Port (10) at 0xf0108100 [2/0/12], versions 0x29, 0x0, 0x84 12. Mirage Wax BA (11) at 0xf0200000 [5], versions 0x13, 0x0, 0x8e 13. Mirage 100 Wax HIL (10) at 0xf0201000 [5/0/1], versions 0x13, 0x0, 0x73 14. Mirage Wax RS-232 (10) at 0xf0202000 [5/0/2], versions 0x13, 0x0, 0x8c 15. Mirage 100 (0) at 0xfffbe000 [8], versions 0x60b, 0x0, 0x4 16. Memory (1) at 0xfffbf000 [9], versions 0x4b, 0x0, 0x9 CPU(s): 1 x PA7100LC (PCX-L) at 100.000000 MHz Lasi version 0 at 0xf0100000 found. Wax at 0xf0200000 found. BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 244 entries (12 bytes) biovec pool[1]: 4 bvecs: 244 entries (48 bytes) biovec pool[2]: 16 bvecs: 244 entries (192 bytes) biovec pool[3]: 64 bvecs: 244 entries (768 bytes) biovec pool[4]: 128 bvecs: 122 entries (1536 bytes) biovec pool[5]: 256 bvecs: 61 entries (3072 bytes) block request queues: 4/128 requests per read queue 4/128 requests per write queue enter congestion at 15 exit congestion at 17 SCSI subsystem initialized pty: 256 Unix98 ptys configured Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing enabled Gecko-style soft power switch enabled. lp: driver loaded but no devices found Generic RTC Driver v1.07 ttyS0 at MMIO 0xf0105800 (irq = 90) is a 16550A ttyS1 at MMIO 0xf0202800 (irq = 121) is a 16550A parport_init_chip: initialize bidirectional-mode. parport0: PC-style at 0xf0102800, irq 88 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Found i82596 at 0xf0107000, IRQ 87 eth0: 82596 at 0xf0107000, 08 00 09 7A DC 08 IRQ 87. 82596.c $Revision: 1.29 $ airo: Probing for PCI adapters airo: Finished probing for PCI adapters 53c700: Version 2.8 By James.Bottomley@HansenPartnership.com scsi0: 53c710 rev 2 scsi0 : LASI SCSI 53c700 scsi0: (2:0) Synchronous at offset 8, period 100ns Vendor: PLEXTOR Model: CD-ROM PX-20TS Rev: 1.01 Type: CD-ROM ANSI SCSI revision: 02 scsi0: (3:0) Synchronous at offset 8, period 100ns Vendor: SEAGATE Model: ST32430N Rev: HP04 Type: Direct-Access ANSI SCSI revision: 02 st: Version 20030413, fixed bufsize 32768, s/g segs 256 scsi0: (3:0) Enabling Tag Command Queuing SCSI device sda: 4194685 512-byte hdwr sectors (2148 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 Attached scsi disk sda at scsi0, channel 0, id 3, lun 0 sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.12 Attached scsi generic sg0 at scsi0, channel 0, id 2, lun 0, type 5 Attached scsi generic sg1 at scsi0, channel 0, id 3, lun 0, type 0 STI GSC/PCI core graphics driver Version 0.9a STI byte mode ROM at f4000000, hpa at f4000000 STI id 2bcb015a-9a02587, conforms to spec rev. 8.04 STI device: HPA4071A STI word mode ROM at f0024000, hpa at f8000000 STI id 2b4ded6d-40a00499, conforms to spec rev. 8.04 STI device: HPA208LC1024 sticon: Initializing STI text console. Console: switching to colour STI console 160x64 mice: PS/2 mouse device common for all mice Found HIL bus at 0xf0201000, IRQ 126 HIL: no keyboard present. input: HIL keyboard, ID -1 at 0xf0201000 (irq 126) found and attached Keyboard initialization sequence failled gsckbd_leds: timeout input: PS/2 keyboard port at 0xf0108000 (irq 69) found and attached input: PS/2 mouse port at 0xf0108100 (irq 69) found and attached oprofile: using timer interrupt. NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 516k freed INIT: version 2.84 booting Mounting devfs on /dev mount: devfs has wrong device number or fs type devfs not supported Loading /etc/console/boottime.kmap.gz Activating swap. Adding 132920k swap on /dev/sda3. Priority:-1 extents:1 Checking root file system... fsck 1.34-WIP (21-May-2003) /dev/sda4: clean, 105836/237120 files, 394653/474075 blocks EXT3 FS 2.4-0.9.16, 02 Dec 2001 on sda4, internal journal System time was Sun Jun 22 09:37:50 UTC 2003. Setting the System Clock using the Hardware Clock as reference... System Clock set. System local time is now Sun Jun 22 09:37:52 UTC 2003. Checking all file systems... fsck 1.34-WIP (21-May-2003) /dev/sda2: clean, 30/10944 files, 35929/43617 blocks Setting kernel variables.. Mounting local filesystems... /dev/sda2 on /boot type ext2 (rw) Cleaning: /etc/network/ifstate. Setting up IP spoofing protection: rp_filter. Configuring network interfaces... eth0: link ok. done. Starting portmap daemon: portmap. Loading the saved-state of the serial devices... Setting up general console font...set_kernel_font: Function not implemented cannot (un)set powersave mode [14;30] Setting the System Clock using the Hardware Clock as reference... System Clock set. Local time: Sun Jun 22 11:37:59 CEST 2003 Cleaning: /tmp /var/lock /var/run. Initializing random number generator... done. Recovering nvi editor sessions... done. Setting up X server socket directory /tmp/.X11-unix...done. INIT: Entering runlevel: 2 Starting system log daemon: syslogd. Starting kernel log daemon: klogd. Starting mouse interface server: gpm. Starting printer spooler: lpd. Starting OpenBSD Secure Shell server: sshd. Starting webmin: webmin. Setting up X font server socket directory /tmp/.font-unix...done. Starting X font server: xfs. Starting internet superserver: xinetd. Restoring mixer settings: failed. Starting NFS common utilities: statd lockd. Starting anac(h)ronistic cron: anacron. Starting deferred execution scheduler: atd. Starting periodic command scheduler: cron. Setting up X server socket directory /tmp/.X11-unix...done. --------------040504060700030405030907--