From mboxrd@z Thu Jan  1 00:00:00 1970
From: mds@paradyne.com (Mark D. Studebaker )
Date: Thu, 19 May 2005 06:24:01 +0000
Subject: PCI module init problems
Message-Id: <3EF5EF37.3080803@paradyne.com>
List-Id: <lm-sensors.vger.kernel.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lm-sensors@vger.kernel.org

No, still no idea what's wrong...

* Mark D. Studebaker <mds@paradyne.com> [2003-06-14 14:35:55 -0400]:
> i2c-voodoo3 doesn't load for me on a system with a Banshee.
> I triple-checked the pci_device_id table.
> voodoo3_probe() is never called and pci_module_init returns -ENODEV.
> 
> i2c-viapro works for me on a 8233 system (ID 1106:3074).
> But on a 686a system (ID 1106:3057)
> it doesn't load. Again I rechecked the ID.
> 
> 
> 
> CVS sensors-detect still finds these devices but the
> CVS modules won't load.
> These both worked in 2.7.0.
> 
> What's not right with the pci_device_id table or with
> pci_module_init???
> 
> modultils version 2.4.22.

Did you ever figure this out?  I looked (but quickly) and didn't
see anything.

Regards,

-- 
Mark M. Hoffman
mhoffman@lightlink.com