From mboxrd@z Thu Jan 1 00:00:00 1970 From: mds@paradyne.com (Mark D. Studebaker ) Date: Thu, 19 May 2005 06:24:02 +0000 Subject: lm80 settings Message-Id: <3EFCDA64.3070706@paradyne.com> List-Id: References: <45898.192.168.0.1.1056436807.squirrel@server.setech> In-Reply-To: <45898.192.168.0.1.1056436807.squirrel@server.setech> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org You probably don't really have a LM80. See FAQ. Edwin van Opstal wrote: > Hi all, > > I have installed the lm_sensors package for temperature monitoring of my > ABIT KG7 mainboard, but when I ran "sensors" I got bogus output (see > attached text). I looked into the /etc/sensors.conf file which suggested I > contact you for LM80 settings. > How can I find these out myself or do you happen to have the necessary > settings from another user? > > Thanks for your time. > > Best regards, > Edwin > > > > ------------------------------------------------------------------------ > > lm80-i2c-0-2d > Adapter: SMBus Via Pro adapter at 5000 > Algorithm: Non-I2C SMBus adapter > +5V: +4.03 V (min = +4.50 V, max = +3.00 V) ALARM > VTT: +1.85 V (min = +1.71 V, max = +2.09 V) ALARM > +3.3V: +2.55 V (min = +2.97 V, max = +3.63 V) ALARM > +Vcore: +3.26 V (min = +2.52 V, max = +3.08 V) ALARM > +12V: +13.64 V (min = +10.80 V, max = +13.20 V) ALARM > -12V: -7.09 V (min = -8.68 V, max = -6.60 V) > -5V: -2.70 V (min = -3.44 V, max = -2.22 V) ALARM > fan1: 10546 RPM (min = 6000 RPM, div = 1) > fan2: 5465 RPM (min = 6000 RPM, div = 1) > temp: -128.00 ?C (hot:limit = +6?C, hysteresis = +5?C) ALARM > (os: limit = +6?C, hysteresis = +5?C) ALARM > alarms: Board temperature input (LM75) ALARM > > eeprom-i2c-0-52 > Adapter: SMBus Via Pro adapter at 5000 > Algorithm: Non-I2C SMBus adapter > Memory type: DDR SDRAM DIMM SPD > SDRAM Size (MB): 256 > > eeprom-i2c-0-53 > Adapter: SMBus Via Pro adapter at 5000 > Algorithm: Non-I2C SMBus adapter > Memory type: DDR SDRAM DIMM SPD > SDRAM Size (MB): 256