All of lore.kernel.org
 help / color / mirror / Atom feed
From: Joel Soete <joel.soete@tiscali.be>
To: Grant Grundler <grundler@parisc-linux.org>
Cc: Joel Soete <jsoe0708@tiscali.be>, parisc-linux@lists.parisc-linux.org
Subject: Re: [parisc-linux] warning: minor abi change
Date: Sat, 28 Jun 2003 10:48:23 +0000	[thread overview]
Message-ID: <3EFD7277.7010605@tiscali.be> (raw)
In-Reply-To: <20030627165451.GB371@dsl2.external.hp.com>

Grant Grundler wrote:

>Joel,
>I mistakenly replied only to you on my previous mail.
>Can you please forward my previous reply to parisc-linux mailing list
>or send a copy back to me - I'll post it to the list then.
>
No pb, I kust forward it to the p-l ml.

>
>On Fri, Jun 27, 2003 at 06:14:58PM +0200, Joel Soete wrote:
>  
>
>>Hi Grant,
>>
>>    
>>
>>>diff -NaurX dontdiff linux-2.4.21-pa0/drivers/ide/pci/ns87415.c linux-2.4.21-rc8-pa35/drivers/ide/pci/ns87415.c
>>>      
>>>
>>>This is for c3000/j5000/et al workstations.
>>>NS "SuckyIO" multifunction chip includes ns87415 compatible IDE controller.
>>>      
>>>
>>...
>>    
>>
>>>>+#define __save_and_cli(x)  do { __save_flags(x); __cli(); } while(0);
>>>>+#define __save_and_sti(x)  do { __save_flags(x); __sti(); } while(0);
>>>>+
>>>>        
>>>>
>>>This is something different - but I'd think this is needed too.
>>>Make sure this isn't a merge error (ie see if it's defined elsewhere).
>>>      
>>>
>>I need it to make work my ide cdrom onto my b2k (I grab this stuff
>>from another platform)
>>    
>>
>
>ah ok.
>
>The IDE CDROM are pretty standard devices. Note the DMA does NOT work.
>And even with PIO mode, it just barely works - enough to do an install.
>So don't use it too much unless you can afford to crash your box.
>At least that was my experience with 2.4.19 or so.
>
Yes also experiment this inconvinience. I just needed it to install the 
initial debian (in its time) and now to read some doc or small ft via rw-cd.

>>The following stuff is just a variant (just for info)
>>    
>>
>
>ok.
>
>...
>  
>
>>>If they are no longer referenced, that's fine.
>>>      
>>>
>>hmm in fact the last ref of 'cpu_irq_actions' is in arch/parisc/kernel/processor.c
>>and now embrace by #if 0 [...] #endif
>>(I will see to cleanup too)
>>...
>>    
>>
>
>ok
>
>  
>
>>>I need the above changes in a format that I apply with "patch -p1 < diff"
>>>      
>>>
>>Here is attached Mydiff2421.txt
>>    
>>
>
>ok. let me apply local and try it out first.
>
Logical

> If all is well, should see
>something by this weekend.
>  
>
It works for my b180 and b2k. I will test it also on the N (still UP 
mode) next week.

Good luck and thanks for your attention,
    Joel

  reply	other threads:[~2003-06-28 13:05 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20030627151546.GA30607@dsl2.external.hp.com>
     [not found] ` <3ED70CF10000AE2E@ocpmta2.freegates.net>
2003-06-27 16:54   ` [parisc-linux] warning: minor abi change Grant Grundler
2003-06-28 10:48     ` Joel Soete [this message]
2003-07-05 23:08   ` Grant Grundler
2003-07-05 23:53     ` John David Anglin
2003-07-06  4:12       ` Grant Grundler
2003-07-06 16:12         ` Joel Soete
2003-07-07 20:02         ` Carlos O'Donell
2003-07-07 20:19           ` John David Anglin
2003-07-08  1:45             ` Carlos O'Donell
2003-07-06  5:57     ` [parisc-linux] IDE modules build prob Grant Grundler
2003-07-06  6:31       ` Grant Grundler
2003-07-06  7:23         ` Alan Cox
     [not found] <20030711065156.GA17025@dsl2.external.hp.com>
2003-07-11  8:26 ` [parisc-linux] warning: minor abi change Joel Soete
2003-07-11 10:24   ` Alan Cox
2003-06-26 13:54 Matthew Wilcox
2003-06-26 17:03 ` Joel Soete
2003-06-26 17:06   ` Matthew Wilcox
2003-06-26 17:45     ` Randolph Chung
2003-06-27 14:41     ` Joel Soete
2003-06-27 16:21     ` Joel Soete
2003-06-27 16:52       ` Alan Cox
2003-07-07 16:00         ` Joel Soete
2003-07-07 16:05           ` Alan Cox
2003-07-07 16:31             ` Matthew Wilcox
2003-07-07 16:39               ` Joel Soete
2003-07-07 16:33             ` Joel Soete

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3EFD7277.7010605@tiscali.be \
    --to=joel.soete@tiscali.be \
    --cc=grundler@parisc-linux.org \
    --cc=jsoe0708@tiscali.be \
    --cc=parisc-linux@lists.parisc-linux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.