From: Patrick Shirkey <pshirkey@boosthardware.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: ALSA development <alsa-devel@alsa-project.org>
Subject: Re: hdsp multiface.
Date: Wed, 02 Jul 2003 21:55:32 +0900 [thread overview]
Message-ID: <3F02D644.4070106@boosthardware.com> (raw)
In-Reply-To: s5h8yrhkyv1.wl@alsa2.suse.de
Takashi Iwai wrote:
>
>>Error opening hwdep device on card hw:1.
>
> ^^^^^^^^^^^^^^^^^^^
>
> this message appears when snd_hwdep_open() fails.
> do you have /dev/snd/hwC1D0 with the proper permission?
>
I realised that cvs is still broken.
So now I'm trying with the 0.9.4 tarballs because cvs is at version
0.9.0rc6 and I get about ten sets of this from hdsploader if I don't
modprobe snd-hdsp first. hdsploader will still load the modules:
06903: symbol=__deregister_frame_info; lookup in file=hdsploader
06903: symbol=__deregister_frame_info; lookup in
file=/usr/lib/libasound.so.2
06903: symbol=__deregister_frame_info; lookup in file=/lib/libm.so.6
06903: symbol=__deregister_frame_info; lookup in file=/lib/libdl.so.2
06903: symbol=__deregister_frame_info; lookup in file=/lib/libpthread.so.0
06903: symbol=__deregister_frame_info; lookup in file=/lib/libc.so.6
06903: symbol=_IO_flush_all; lookup in file=hdsploader
06903: symbol=_IO_flush_all; lookup in file=/usr/lib/libasound.so.2
06903: symbol=_IO_flush_all; lookup in file=/lib/libm.so.6
06903: symbol=_IO_flush_all; lookup in file=/lib/libdl.so.2
06903: symbol=_IO_flush_all; lookup in file=/lib/libpthread.so.0
06903: symbol=_IO_flush_all; lookup in file=/lib/libc.so.6
06903: symbol=_exit; lookup in file=hdsploader
06903: symbol=_exit; lookup in file=/usr/lib/libasound.so.2
06903: symbol=_exit; lookup in file=/lib/libm.so.6
06903: symbol=_exit; lookup in file=/lib/libdl.so.2
06903: symbol=_exit; lookup in file=/lib/libpthread.so.0
06903: symbol=_exit; lookup in file=/lib/libc.so.6
I'm testing as root so these settings should be correct right?
crw-rw---- 1 root audio 116, 4 Jul 3 08:41 hwC0D0
crw-rw---- 1 root audio 116, 5 Jul 3 08:41 hwC0D1
If I load the module before running modprobe snd-hdsp I can see the card
in /proc/asound/cards but then hdsploader says this:
hdsploader - firmware loader for RME Hammerfall DSP cards
Looking for HDSP + Multiface or Digiface cards :
Card 0 : C-Media PCI CMI8738 (model 37) at 0x9800, irq 10
19612: symbol=strncmp; lookup in file=hdsploader
19612: symbol=strncmp; lookup in file=/usr/lib/libasound.so.2
19612: symbol=strncmp; lookup in file=/lib/libm.so.6
19612: symbol=strncmp; lookup in file=/lib/libdl.so.2
19612: symbol=strncmp; lookup in file=/lib/libpthread.so.0
19612: symbol=strncmp; lookup in file=/lib/libc.so.6
Card 1 : RME Hammerfall DSP (Multiface) at 0xe9000000, irq 11
Upload firmware for card hw:1
Error opening hwdep device on card hw:1.
Either way I still get this message from aplay:
aplay -f cd -D hw:1,0 /art/1REC/020403-studio.wav
Playing WAVE '/art/1REC/020403-studio.wav' : Signed 16 bit Little
Endian, Rate 44100 Hz, Stereo
aplay: set_params:800: Access type not available
--
Patrick Shirkey - Boost Hardware Ltd.
Http://www.boosthardware.com
Http://www.djcj.org - The Linux Audio Users guide
========================================
Being on stage with the band in front of crowds shouting, "Get off! No!
We want normal music!", I think that was more like acting than anything
I've ever done.
Goldie, 8 Nov, 2002
The Scotsman
-------------------------------------------------------
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa00100006ave/direct;at.asp_061203_01/01
next prev parent reply other threads:[~2003-07-02 16:45 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-07-02 6:02 hdsp multiface Patrick Shirkey
2003-07-02 10:27 ` Takashi Iwai
2003-07-02 12:55 ` Patrick Shirkey [this message]
2003-07-02 17:25 ` Mark Knecht
2003-07-02 16:53 ` Patrick Shirkey
2003-07-02 17:00 ` Patrick Shirkey
2003-07-02 17:57 ` Mark Knecht
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3F02D644.4070106@boosthardware.com \
--to=pshirkey@boosthardware.com \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.