From: Julien <soda@gunnm.org>
To: linux-kernel@vger.kernel.org
Subject: PROBLEM : touchpad doesn't work
Date: Tue, 15 Jul 2003 23:10:10 +0200 [thread overview]
Message-ID: <3F146DB2.1080204@gunnm.org> (raw)
1 . The touchpad of my laptop doesn't work with the 2.6 Linux kernel,
but works with the 2.5.70
2 . I allways test the new Linux kernel, and my touchpad worked. It
works with the Linux kernel 2.5.70, but doesn't work thos the 2.5.75. I
use in the XF86Config the device : /dev/psaux. When I start X, the mouse
appaears, but I can't move it ! My laptop is a Samsung V20. I try to
configure X with /dev/input mouse0 or /dev/input/mice, but it doesn't work.
3. mouse, Xfree, touchpad, /dev/psaux
4. Kernel version :
Linux version 2.6.0-test1 (root@hirashi) (version gcc 3.3.1 20030626
(Debian pre
release)) #4 Tue Jul 15 15:51:15 CEST 2003
7.1 :
Envionment :
-------------------------
Linux hirashi 2.6.0-test1 #4 Tue Jul 15 15:51:15 CEST 2003 i686 GNU/Linux
Gnu C 3.3.1
Gnu make 3.80
util-linux 2.11z
mount 2.11z
e2fsprogs 1.34-WIP
pcmcia-cs 3.1.33
PPP 2.4.1
Linux C Library 2.3.1
Dynamic linker (ldd) 2.3.1
Procps 3.1.9
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.0
Modules Loaded busmouse md5 ipv6 3c589_cs apm nfs lockd sunrpc
snd_intel
8x0 snd_ac97_codec snd_mpu401_uart snd_rawmidi snd_seq_device
snd_pcm_oss snd_pc
m snd_page_alloc snd_timer snd_mixer_oss snd soundcore p4_clockmod
freq_table id
e_cd i830 ds yenta_socket pcmcia_core isofs zlib_inflate sr_mod cdrom sg
ide_scs
i scsi_mod eepro100 mii intel_agp agpgart rtc
7.2
/proc/cpuinfo
-------------------------------------
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 1
model name : Intel(R) Celeron(R) CPU 1.70GHz
stepping : 3
cpu MHz : 1695.090
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fx
sr sse sse2 ss ht tm
bogomips : 3342.33
7.3
busmouse 7740 0 - Live 0xd0178000
md5 4096 1 - Live 0xd01ad000
ipv6 247908 14 - Live 0xd02a6000
3c589_cs 13064 0 - Live 0xd01b2000
apm 18416 1 - Live 0xd01ff000
nfs 97072 2 - Live 0xd0246000
lockd 60784 2 nfs,[unsafe], Live 0xd01e0000
sunrpc 130376 5 nfs,lockd, Live 0xd0225000
snd_intel8x0 30372 0 - Live 0xd019c000
snd_ac97_codec 50052 1 snd_intel8x0, Live 0xd01f1000
snd_mpu401_uart 7808 1 snd_intel8x0, Live 0xd0036000
snd_rawmidi 24608 1 snd_mpu401_uart, Live 0xd01a5000
snd_seq_device 8200 1 snd_rawmidi, Live 0xd0174000
snd_pcm_oss 52260 0 - Live 0xd01d2000
snd_pcm 96164 2 snd_intel8x0,snd_pcm_oss, Live 0xd01b9000
snd_page_alloc 10372 2 snd_intel8x0,snd_pcm, Live 0xd011f000
snd_timer 25220 1 snd_pcm, Live 0xd0194000
snd_mixer_oss 18944 1 snd_pcm_oss, Live 0xd018e000
snd 48996 9
snd_intel8x0,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_pcm_oss,snd_pcm,snd_t
imer,snd_mixer_oss, Live 0xd0145000
soundcore 9152 1 snd, Live 0xd0123000
p4_clockmod 4488 0 - Live 0xd00ee000
freq_table 4484 1 p4_clockmod, Live 0xd00e5000
ide_cd 40964 0 - Live 0xd0164000
i830 71852 0 - Live 0xd017b000
ds 15236 3 3c589_cs, Live 0xd0140000
yenta_socket 12928 1 - Live 0xd0110000
pcmcia_core 63680 3 3c589_cs,ds,yenta_socket, Live 0xd0153000
isofs 34872 0 - Live 0xd0129000
zlib_inflate 22144 1 isofs, Live 0xd0118000
sr_mod 16292 0 - Live 0xd00e9000
cdrom 34848 2 ide_cd,sr_mod, Live 0xd0106000
sg 32152 0 - Live 0xd00c8000
ide_scsi 15744 0 - Live 0xd00da000
scsi_mod 74780 3 sr_mod,sg,ide_scsi, Live 0xd00f2000
eepro100 29964 0 - Live 0xd00d1000
mii 5248 1 eepro100, Live 0xd0039000
intel_agp 16796 1 - Live 0xd0026000
agpgart 30760 2 intel_agp, Live 0xd003c000
rtc 12724 0 - Live 0xd002c000
7.4
/proc/ioports
------------------------------
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
1000-10ff : PCI CardBus #03
1100-111f : Intel Corp. 82801DB SMBus
1400-14ff : PCI CardBus #03
1800-181f : Intel Corp. 82801DB USB (Hub #1)
1820-183f : Intel Corp. 82801DB USB (Hub #2)
1840-185f : Intel Corp. 82801DB USB (Hub #3)
1860-186f : Intel Corp. 82801DB ICH4 IDE
1860-1867 : ide0
1868-186f : ide1
18c0-18ff : Intel Corp. 82801DB AC'97 Audio
1c00-1cff : Intel Corp. 82801DB AC'97 Audio
2000-207f : Intel Corp. 82801DB AC'97 Modem
2400-24ff : Intel Corp. 82801DB AC'97 Modem
3000-303f : Intel Corp. 82801BD PRO/100 VE (
3000-303f : eepro100
/proc/iomem
------------------------
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000ce000-000cffff : reserved
000e0000-000effff : Extension ROM
000f0000-000fffff : System ROM
00100000-0f6dffff : System RAM
00100000-002493c9 : Kernel code
002493ca-002d787f : Kernel data
0f6e0000-0f6effff : ACPI Tables
0f6f0000-0f6fffff : ACPI Non-volatile Storage
0f700000-0f77ffff : System RAM
0f780000-0fffffff : reserved
10000000-100003ff : Intel Corp. 82801DB ICH4 IDE
10001000-10001fff : Ricoh Co Ltd RL5c475
10400000-107fffff : PCI CardBus #03
10800000-10bfffff : PCI CardBus #03
60000000-60000fff : card services
80000000-8007ffff : Intel Corp. 82845G/GL [Brookdale
88000000-8fffffff : Intel Corp. 82845G/GL [Brookdale
d0080000-d00803ff : Intel Corp. 82801DB USB EHCI Con
d0080800-d00808ff : Intel Corp. 82801DB AC'97 Audio
d0080800-d00808ff : Intel 82801DB-ICH4 - Controller
d0080c00-d0080dff : Intel Corp. 82801DB AC'97 Audio
d0080c00-d0080dff : Intel 82801DB-ICH4 - AC'97
d0100000-d0103fff : Texas Instruments TSB43AB22/A IEEE-139
d0104000-d0104fff : Intel Corp. 82801BD PRO/100 VE (
d0104000-d0104fff : eepro100
d0105000-d01057ff : Texas Instruments TSB43AB22/A IEEE-139
e0000000-efffffff : Intel Corp. 82845G/GL [Brookdale
ff800000-ffbfffff : reserved
fffffc00-ffffffff : reserved
7.5 : lspci -vvv
-----------------------
00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host
Bridge (rev 01)
Subsystem: Samsung Electronics Co Ltd: Unknown device c008
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Capabilities: [e4] #09 [1105]
00:02.0 VGA compatible controller: Intel Corp. 82845G/GL [Brookdale-G]
Chipset Integrated Graphics Device
(rev 01) (prog-if 00 [VGA])
Subsystem: Samsung Electronics Co Ltd: Unknown device c008
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 88000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 01)
(prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd: Unknown device c008
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 1800 [size=32]
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 01)
(prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd: Unknown device c008
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 1820 [size=32]
00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 01)
(prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd: Unknown device c008
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 5
Region 4: I/O ports at 1840 [size=32]
00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 01)
(prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd: Unknown device c008
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 3
Region 0: Memory at d0080000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 81)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=02, subordinate=03, sec-latency=32
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d0100000-d01fffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 01) (prog-if 8a
[Master SecP PriP])
Subsystem: Samsung Electronics Co Ltd: Unknown device c008
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 1860 [size=16]
Region 5: Memory at 10000000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 SMBus: Intel Corp. 82801DB SMBus (rev 01)
Subsystem: Samsung Electronics Co Ltd: Unknown device c008
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 1100 [size=32]
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio
(rev 01)
Subsystem: Samsung Electronics Co Ltd: Unknown device c008
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 18c0 [size=64]
Region 2: Memory at d0080c00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at d0080800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1f.6 Modem: Intel Corp. 82801DB AC'97 Modem (rev 01) (prog-if 00
[Generic])
Subsystem: Samsung Electronics Co Ltd: Unknown device 2115
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2000 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:03.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 80)
Subsystem: Samsung Electronics Co Ltd: Unknown device c008
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 10
Region 0: Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 10400000-107ff000 (prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+
PostWrite+
16-bit legacy interface ports at 0001
02:08.0 Ethernet controller: Intel Corp. 82801BD PRO/100 VE (LOM)
Ethernet Controller (rev 81)
Subsystem: Samsung Electronics Co Ltd: Unknown device c008
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 3
Region 0: Memory at d0104000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 3000 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
02:0d.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link) (prog-i
f 10 [OHCI])
Subsystem: Samsung Electronics Co Ltd: Unknown device c008
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0105000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at d0100000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
7.6 : /proc/scsi/scsi
------------------------------
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: TOSHIBA Model: DVD-ROM SD-R2212 Rev: 1713
Type: CD-ROM ANSI SCSI revision: 02
7.7 :
/proc/bus/input/devices
---------------------------------
I: Bus=0011 Vendor=0002 Product=0007 Version=0000
N: Name="Synaptics Synaptics TouchPad"
P: Phys=isa0060/serio4/input0
H: Handlers=event0 evbug
B: EV=1b
B: KEY=670000 0 0 0 0 0 0 0 0
B: ABS=1000003
B: MSC=4
I: Bus=0011 Vendor=0001 Product=0002 Version=ab83
N: Name="AT Set 2 keyboard"
P: Phys=isa0060/serio0/input0
H: Handlers=kbd event1 evbug
B: EV=120003
B: KEY=4 2000000 c061f9 fbc9d621 efdfffdf ffefffff ffffffff fffffffe
B: LED=7
/proc/bus/input/handlers
--------------------------------
N: Number=0 Name=kbd
N: Number=1 Name=mousedev Minor=32
N: Number=2 Name=evdev Minor=64
N: Number=3 Name=evbug
next reply other threads:[~2003-07-15 20:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-07-15 21:10 Julien [this message]
2003-07-15 22:02 ` PROBLEM : touchpad doesn't work Terje Kvernes
2003-07-16 15:09 ` Brandon Low
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3F146DB2.1080204@gunnm.org \
--to=soda@gunnm.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.