From: Juan Pedro Paredes Caballero <juampe@iquis.com>
To: kernel <linux-kernel@vger.kernel.org>
Subject: linux-2.6.0-test1: PCMCIA SanDisk, Card Module ide_cs cannot be unloaded due to unsafe usage
Date: Fri, 18 Jul 2003 09:29:31 +0200 [thread overview]
Message-ID: <3F17A1DB.10504@iquis.com> (raw)
When I enter my SanDisk Card
hde: SanDisk SDCFB-16, CFA DISK drive
ide2 at 0x100-0x107,0x10e on irq 3
hde: max request size: 128KiB
hde: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hde: task_no_data_intr: error=0x04 { DriveStatusError }
hde: 31360 sectors (16 MB) w/1KiB Cache, CHS=490/2/32
/dev/ide/host2/bus0/target0/lun0: p1
/dev/ide/host2/bus0/target0/lun0: p1
devfs_mk_bdev: could not append to parent for
ide/host2/bus0/target0/lun0/part1
kobject_register failed for hde1 (-17)
Call Trace:
[kobject_register+89/96] kobject_register+0x59/0x60
[register_disk+327/384] register_disk+0x147/0x180
[add_disk+80/96] add_disk+0x50/0x60
[exact_match+0/16] exact_match+0x0/0x10
[exact_lock+0/32] exact_lock+0x0/0x20
[idedisk_attach+284/448] idedisk_attach+0x11c/0x1c0
[ata_attach+65/208] ata_attach+0x41/0xd0
[ideprobe_init+254/285] ideprobe_init+0xfe/0x11d
[set_cis_map+64/288] set_cis_map+0x40/0x120
[ide_probe_module+19/32] ide_probe_module+0x13/0x20
[ide_register_hw+334/384] ide_register_hw+0x14e/0x180
[__crc_parport_ieee1284_epp_write_data+1417244/6889293]
idecs_register+0x58/0x70 [ide_cs]
[CardServices+533/862] CardServices+0x215/0x35e
[__crc_parport_ieee1284_epp_write_data+1418579/6889293]
ide_config+0x51f/0x840 [ide_cs]
[scheduler_tick+94/768] scheduler_tick+0x5e/0x300
[update_process_times+70/96] update_process_times+0x46/0x60
[tasklet_action+70/112] tasklet_action+0x46/0x70
[do_IRQ+197/240] do_IRQ+0xc5/0xf0
[common_interrupt+24/32] common_interrupt+0x18/0x20
[read_cis_cache+134/384] read_cis_cache+0x86/0x180
[pcmcia_get_next_tuple+588/688] pcmcia_get_next_tuple+0x24c/0x2b0
[pcmcia_get_first_tuple+188/368] pcmcia_get_first_tuple+0xbc/0x170
[yenta_set_mem_map+417/496] yenta_set_mem_map+0x1a1/0x1f0
[scheduler_tick+94/768] scheduler_tick+0x5e/0x300
[update_process_times+70/96] update_process_times+0x46/0x60
[tasklet_action+70/112] tasklet_action+0x46/0x70
[do_IRQ+197/240] do_IRQ+0xc5/0xf0
[common_interrupt+24/32] common_interrupt+0x18/0x20
[read_cis_cache+134/384] read_cis_cache+0x86/0x180
[pcmcia_get_next_tuple+588/688] pcmcia_get_next_tuple+0x24c/0x2b0
[pcmcia_get_first_tuple+188/368] pcmcia_get_first_tuple+0xbc/0x170
[read_cis_cache+244/384] read_cis_cache+0xf4/0x180
[pcmcia_get_next_tuple+588/688] pcmcia_get_next_tuple+0x24c/0x2b0
[pcmcia_validate_cis+307/528] pcmcia_validate_cis+0x133/0x210
[__find_get_block+108/192] __find_get_block+0x6c/0xc0
[create_virtual_node+838/1328] create_virtual_node+0x346/0x530
[pathrelse_and_restore+67/80] pathrelse_and_restore+0x43/0x50
[__crc_parport_ieee1284_epp_write_data+1419775/6889293]
ide_event+0x6b/0x110 [ide_cs]
[pcmcia_register_client+517/576] pcmcia_register_client+0x205/0x240
[yenta_set_mem_map+417/496] yenta_set_mem_map+0x1a1/0x1f0
[reiserfs_cut_from_item+421/1168] reiserfs_cut_from_item+0x1a5/0x490
[bh_lru_install+164/224] bh_lru_install+0xa4/0xe0
[CardServices+430/862] CardServices+0x1ae/0x35e
[__crc_parport_ieee1284_epp_write_data+1416901/6889293]
ide_attach+0x111/0x150 [ide_cs]
[__crc_parport_ieee1284_epp_write_data+1419668/6889293]
ide_event+0x0/0x110 [ide_cs]
[get_pcmcia_driver+55/80] get_pcmcia_driver+0x37/0x50
[bind_request+216/432] bind_request+0xd8/0x1b0
[ds_ioctl+1388/1696] ds_ioctl+0x56c/0x6a0
[sock_def_readable+95/112] sock_def_readable+0x5f/0x70
[unix_dgram_sendmsg+1011/1232] unix_dgram_sendmsg+0x3f3/0x4d0
[buffered_rmqueue+178/336] buffered_rmqueue+0xb2/0x150
[sock_sendmsg+158/208] sock_sendmsg+0x9e/0xd0
[do_anonymous_page+273/480] do_anonymous_page+0x111/0x1e0
[wake_up_inode+15/48] wake_up_inode+0xf/0x30
[buffered_rmqueue+178/336] buffered_rmqueue+0xb2/0x150
[zap_pmd_range+75/112] zap_pmd_range+0x4b/0x70
[unmap_page_range+75/144] unmap_page_range+0x4b/0x90
[unmap_vmas+255/576] unmap_vmas+0xff/0x240
[unmap_region+149/224] unmap_region+0x95/0xe0
[unmap_vma+72/144] unmap_vma+0x48/0x90
[unmap_vma_list+31/48] unmap_vma_list+0x1f/0x30
[do_munmap+304/384] do_munmap+0x130/0x180
[sys_ioctl+201/592] sys_ioctl+0xc9/0x250
[sys_munmap+68/112] sys_munmap+0x44/0x70
[syscall_call+7/11] syscall_call+0x7/0xb
Module ide_cs cannot be unloaded due to unsafe usage in
include/linux/module.h:482
ide-cs: hde: Vcc = 3.3, Vpp = 0.0
next reply other threads:[~2003-07-18 7:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-07-18 7:29 Juan Pedro Paredes Caballero [this message]
2003-07-18 15:01 ` linux-2.6.0-test1: ide_cs cannot be unloaded due to unsafe usage in include/linux/module.h:482 Juan Pedro Paredes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3F17A1DB.10504@iquis.com \
--to=juampe@iquis.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.