All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fabrice Bellard <fabrice.bellard@free.fr>
To: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] powerpc hang
Date: Sat, 09 Aug 2003 12:51:58 +0200	[thread overview]
Message-ID: <3F34D24D.5010003@free.fr> (raw)
In-Reply-To: 20030809024824.GC6242@themountaingoats.net

It should be safe. I am going to merge your patch. Thank you!

Fabrice.

Jon Nall wrote:
> On Fri, Aug 08, 2003 at 08:13:35AM -0500, Jon Nall wrote:
> 
>>  Question: is it safe to replace all of these with ESP since ESP should
>>  default to env->regs[R_ESP] if there is no AREG defined for the
>>  architecture? (or more generally, is it safe to replace env->regs[XXX]
>>  with XXX?)
> 
> 
> i replaced all instances of env->regs[R_ESP] in helper-i386.c with ESP
> (see below). this allowed me to run test-i386 to completion with no
> errors! i'm attaching a full patch to get qemu working on ppc/gcc3,
> which includes this change and the changes i posted previously.
> 
> NOTE: there was one instance of env->regs[E_ESP] in helper-i386.c that
> went unchanged -- the one in cpu_loop_exit(), since this was setting the
> register to ESP anyway.
> 
> 
> nall.
> 
> 
> ------------------------------------------------------------------------
> 
> --- dyngen.c	11 Jul 2003 15:16:56 -0000	1.26
> +++ dyngen.c	9 Aug 2003 02:52:25 -0000
> @@ -687,7 +687,11 @@
>  
>                      if (val >= start_offset && val < start_offset + copy_size) {
>                          n = strtol(p, NULL, 10);
> +#if ( __GNUC__ == 3) && defined(__powerpc__)
> +                        fprintf(outfile, "    label_offsets[%d] = %d + (gen_code_ptr - gen_code_buf);\n", n, val - start_offset + 4);
> +#else
>                          fprintf(outfile, "    label_offsets[%d] = %d + (gen_code_ptr - gen_code_buf);\n", n, val - start_offset);
> +#endif
>                      }
>                  }
>              }
> --- exec.h	26 Jul 2003 12:06:08 -0000	1.13
> +++ exec.h	9 Aug 2003 02:52:26 -0000
> @@ -210,6 +210,7 @@
>  label ## n:\
>      T0 = (long)(tbparam) + (n);\
>      EIP = eip;\
> +    EXIT_TB();\
>  } while (0)
>  
>  #else
> --- helper-i386.c	29 Jul 2003 20:53:01 -0000	1.11
> +++ helper-i386.c	9 Aug 2003 02:52:27 -0000
> @@ -285,13 +285,13 @@
>  
>      /* XXX: check that enough room is available */
>      if (new_stack) {
> -        old_esp = env->regs[R_ESP];
> +        old_esp = ESP;
>          old_ss = env->segs[R_SS].selector;
>          load_seg(R_SS, ss, env->eip);
>      } else {
>          old_esp = 0;
>          old_ss = 0;
> -        esp = env->regs[R_ESP];
> +        esp = ESP;
>      }
>      if (is_int)
>          old_eip = next_eip;
> @@ -300,7 +300,7 @@
>      old_cs = env->segs[R_CS].selector;
>      load_seg(R_CS, selector, env->eip);
>      env->eip = offset;
> -    env->regs[R_ESP] = esp - push_size;
> +    ESP = esp - push_size;
>      ssp = env->segs[R_SS].base + esp;
>      if (shift == 1) {
>          int old_eflags;
> @@ -374,7 +374,7 @@
>      ptr = dt->base + intno * 4;
>      offset = lduw(ptr);
>      selector = lduw(ptr + 2);
> -    esp = env->regs[R_ESP];
> +    esp = ESP;
>      ssp = env->segs[R_SS].base;
>      if (is_int)
>          old_eip = next_eip;
> @@ -389,7 +389,7 @@
>      stw(ssp + (esp & 0xffff), old_eip);
>      
>      /* update processor state */
> -    env->regs[R_ESP] = (env->regs[R_ESP] & ~0xffff) | (esp & 0xffff);
> +    ESP = (ESP & ~0xffff) | (esp & 0xffff);
>      env->eip = offset;
>      env->segs[R_CS].selector = selector;
>      env->segs[R_CS].base = (uint8_t *)(selector << 4);
> @@ -784,7 +784,7 @@
>      
>      new_cs = T0;
>      new_eip = T1;
> -    esp = env->regs[R_ESP];
> +    esp = ESP;
>      esp_mask = 0xffffffff;
>      if (!(env->segs[R_SS].flags & DESC_B_MASK))
>          esp_mask = 0xffff;
> @@ -802,9 +802,9 @@
>      }
>  
>      if (!(env->segs[R_SS].flags & DESC_B_MASK))
> -        env->regs[R_ESP] = (env->regs[R_ESP] & ~0xffff) | (esp & 0xffff);
> +        ESP = (ESP & ~0xffff) | (esp & 0xffff);
>      else
> -        env->regs[R_ESP] = esp;
> +        ESP = esp;
>      env->eip = new_eip;
>      env->segs[R_CS].selector = new_cs;
>      env->segs[R_CS].base = (uint8_t *)(new_cs << 4);
> @@ -846,7 +846,7 @@
>          if (!(e2 & DESC_P_MASK))
>              raise_exception_err(EXCP0B_NOSEG, new_cs & 0xfffc);
>  
> -        sp = env->regs[R_ESP];
> +        sp = ESP;
>          if (!(env->segs[R_SS].flags & DESC_B_MASK))
>              sp &= 0xffff;
>          ssp = env->segs[R_SS].base + sp;
> @@ -868,9 +868,9 @@
>              raise_exception_err(EXCP0D_GPF, new_cs & 0xfffc);
>          /* from this point, not restartable */
>          if (!(env->segs[R_SS].flags & DESC_B_MASK))
> -            env->regs[R_ESP] = (env->regs[R_ESP] & 0xffff0000) | (sp & 0xffff);
> +            ESP = (ESP & 0xffff0000) | (sp & 0xffff);
>          else
> -            env->regs[R_ESP] = sp;
> +            ESP = sp;
>          env->segs[R_CS].base = sc1.base;
>          env->segs[R_CS].limit = sc1.limit;
>          env->segs[R_CS].flags = sc1.flags;
> @@ -938,7 +938,7 @@
>              param_count = e2 & 0x1f;
>              push_size = ((param_count * 2) + 8) << shift;
>  
> -            old_esp = env->regs[R_ESP];
> +            old_esp = ESP;
>              old_ss = env->segs[R_SS].selector;
>              if (!(env->segs[R_SS].flags & DESC_B_MASK))
>                  old_esp &= 0xffff;
> @@ -995,11 +995,12 @@
>          load_seg(R_CS, selector, env->eip);
>          /* from this point, not restartable if same priviledge */
>          if (!(env->segs[R_SS].flags & DESC_B_MASK))
> -            env->regs[R_ESP] = (env->regs[R_ESP] & 0xffff0000) | (sp & 0xffff);
> +            ESP = (ESP & 0xffff0000) | (sp & 0xffff);
>          else
> -            env->regs[R_ESP] = sp;
> +            ESP = sp;
>          EIP = offset;
>      }
> +
>  }
>  
>  /* init the segment cache in vm86 mode */
> @@ -1020,7 +1021,7 @@
>      uint8_t *ssp;
>      int eflags_mask;
>      
> -    sp = env->regs[R_ESP] & 0xffff;
> +    sp = ESP & 0xffff;
>      ssp = env->segs[R_SS].base + sp;
>      if (shift == 1) {
>          /* 32 bits */
> @@ -1034,7 +1035,7 @@
>          new_eip = lduw(ssp);
>      }
>      new_esp = sp + (6 << shift);
> -    env->regs[R_ESP] = (env->regs[R_ESP] & 0xffff0000) | 
> +    ESP = (ESP & 0xffff0000) | 
>          (new_esp & 0xffff);
>      load_seg_vm(R_CS, new_cs);
>      env->eip = new_eip;
> @@ -1053,7 +1054,7 @@
>      int cpl, dpl, rpl, eflags_mask;
>      uint8_t *ssp;
>      
> -    sp = env->regs[R_ESP];
> +    sp = ESP;
>      if (!(env->segs[R_SS].flags & DESC_B_MASK))
>          sp &= 0xffff;
>      ssp = env->segs[R_SS].base + sp;
> @@ -1129,9 +1130,9 @@
>          load_seg(R_SS, new_ss, env->eip);
>      }
>      if (env->segs[R_SS].flags & DESC_B_MASK)
> -        env->regs[R_ESP] = new_esp;
> +        ESP = new_esp;
>      else
> -        env->regs[R_ESP] = (env->regs[R_ESP] & 0xffff0000) | 
> +        ESP = (ESP & 0xffff0000) | 
>              (new_esp & 0xffff);
>      env->eip = new_eip;
>      if (is_iret) {
> @@ -1164,7 +1165,7 @@
>      load_seg_vm(R_GS, new_gs);
>  
>      env->eip = new_eip;
> -    env->regs[R_ESP] = new_esp;
> +    ESP = new_esp;
>  }
>  
>  void helper_iret_protected(int shift)
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Qemu-devel mailing list
> Qemu-devel@nongnu.org
> http://mail.nongnu.org/mailman/listinfo/qemu-devel


-- 
Fabrice.

      reply	other threads:[~2003-08-09 10:53 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-08-06 22:50 [Qemu-devel] powerpc hang Jon Nall
2003-08-07  8:02 ` Fabrice Bellard
2003-08-07 22:05 ` Jon Nall
2003-08-08  9:20   ` Christof Petig
2003-08-08 13:13   ` Jon Nall
2003-08-09  2:48     ` Jon Nall
2003-08-09 10:51       ` Fabrice Bellard [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3F34D24D.5010003@free.fr \
    --to=fabrice.bellard@free.fr \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.