From: Jerzy Tryjarski <jurekt@pkp.com.pl>
To: linux-serial@vger.kernel.org
Subject: IP over X.25 via asynchrous RS232
Date: Tue, 19 Aug 2003 13:45:56 +0200 [thread overview]
Message-ID: <3F420DF4.20000@pkp.com.pl> (raw)
Hi,
I want to connect my PC under linux RH 9 with e-mail server via X.25
packet network using standard asynchrous rs232 interface in my PC (
without aditional hardware ).
IP datagrams are encapsulated inside packets on an X.25 virtual circuit.
Mail server is connected to X.25 network via Cisco router. So I use the
IETF standard encapsulation, as specified by RFC 1356, set X.121
address, set IP address and I map between X.121 address and IP address.
Finaly in my PC It must be additional software for rs232 and user
application to be abble to configure the interface with such as
functions as assigning IP address, assigning X.121 address, mapping, pad
and other specific for X.25 network functions.
Can anybody recommend the best solution ?
Jurek
next reply other threads:[~2003-08-19 9:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-08-19 11:45 Jerzy Tryjarski [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-08-19 11:46 IP over X.25 via asynchrous RS232 Jerzy Tryjarski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3F420DF4.20000@pkp.com.pl \
--to=jurekt@pkp.com.pl \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.