From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3F56E58C.17B0E035@aimsys.nl> Date: Thu, 04 Sep 2003 09:11:08 +0200 From: Jaap-Jan Boor MIME-Version: 1.0 To: Jan Dominik Baranski Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: Kernel hangs on EP862-1.1 during boot References: <3F5664E8.3080502@ece.msstate.edu> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Hi Jan, What you could do is check of your board data that is passed to the kernel is still valid in start_kernel. Also, are you sure you have the kernel uart driver properly configured (i.e. it works but you don't see anything) Jaap-Jan Jan Dominik Baranski wrote: > > Hello all, > I'm having trouble getting a 2.4.22 kernel to boot on an Embedded Planet > EP862-1.1 board (based on an MPC860). I get this: > --- > Loaded addresses 00400000 through 0049FFFF. > >go > [Go 00400000] > > loaded at: 00400000 004A31F4 > relocated to: 00180000 002231F4 > board data at: 00220128 00220144 > relocated to: 001862E0 001862FC > zimage at: 001868A0 0021F3EC > avail ram: 00224000 01000000 > > Linux/PPC load: console=ttyS0,9600 > Uncompressing Linux...done. > Now booting the kernel > > > > --- > I've searched the archives, but no one seems to have this board/problem > combination. I've made sure the watchdog timer is disabled and that the > IMMR (0xfa200000) is set correctly. Being pretty new to this, I don't > really know where else to look. Maybe something related to m8xx_board_info? > > The thing is, I've been able to get an old kernel (2.4.7) from Timesys > that's configured for an RPX Classic board to boot correctly. I just > can't figure out what they may have done that I haven't. > > Any suggestions?? > > Thanks > > -Jan > -- J.G.J. Boor Anton Philipsweg 1 Software Engineer 1223 KZ Hilversum AimSys bv tel. +31 35 689 1941 Postbus 2194, 1200 CD Hilversum mailto:jjboor@aimsys.nl ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/