Re: RAID1-Device won't survive reboot

[rob <rob@fantinibakery.com>]

so  /dev/sdb1  is not  partition type  'fd' ?

if you want hints at solving, please post your

/etc/fstab
/etc/raidtab 
/etc/lilo.conf or /boot/grub/grub.conf


Thomas Steudten wrote:

>
> I think the partition is not marked with type fd: like
> mime: It must be type "fd"
>
> [1021] (1) #  fdisk -l /dev/sda
>
> Disk /dev/sda: 64 heads, 32 sectors, 35003 cylinders
> Units = cylinders of 2048 * 512 bytes
>
>    Device Boot    Start       End    Blocks   Id  System
> /dev/sda1             1      8676   8884208   fd  Linux raid autodetect
> /dev/sda2          8677     35003  26958848   83  Linux
>
>
>
> rob wrote:
>
>> I'm not familiar with SuSE 8.2,   but here are some hints:
>>
>> -is it possible that  either the mount of md0 is getting done before  
>> md0 is assembled, or hdb1  is getting mounted directly?  check  df 
>> -v  right after boot.
>>
>
>>>
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html