From: Andriy Rysin <arysin@bcsii.net>
To: unlisted-recipients:; (no To-header on input)
Cc: linux-kernel@vger.kernel.org
Subject: 2.4.20, 2.4.22, 2.4.6-test7: system locks up completely when writing to floppy (2.2.20 is ok)
Date: Wed, 15 Oct 2003 15:26:24 -0700 [thread overview]
Message-ID: <3F8DC990.1040203@bcsii.net> (raw)
In-Reply-To: <Pine.LNX.4.44.0310061946290.2403-100000@logos.cnet>
I've got two motherboards on which I have this problem, they're ASUS
P4S533-X and P4S533-MX. When I am trying to write something to a floppy
the system hangs completely. dd, mkfs or mount + cp are all the sme. The
floppy does several writing sounds and that's it, the light is on. No
oppses, no panic no log/console messages. I have this with 2.4.20,
2.4.22 both from RedHat and 2.4.6-test7 from
http://people.redhat.com/arjanv/2.5/RPMS.kernel/
I don't have this with DOS :) or linux 2.2.20 from tomsrtbt floppy and I
don't have this on any other motherboards.
I changed floppy, changed floppy cable, tried different BIOS settings,
changed video card, changed hardrives, booted in S mode. Reproducible 100%.
It seems pretty like this message
http://www.uwsg.iu.edu/hypermail/linux/kernel/0202.2/1557.html
dmesg from 2.4.22 is below.
Please CC me if you reply or need more info.
Andriy
Linux version 2.4.22-20.1.2024.2.36.nptl
(bhcompile@daffy.perf.redhat.com) (gcc version 3.2.3 20030422 (Red Hat
Linux 3.2.3-6)) #1 Wed Sep 3 10:53:22 EDT 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 131068
zone(0): 4096 pages.
zone(1): 126972 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 ASUS ) @ 0x000f5690
ACPI: RSDT (v001 ASUS P4S533-X 0x42302e31 MSFT 0x31313031) @ 0x1fffc000
ACPI: FADT (v001 ASUS P4S533-X 0x42302e31 MSFT 0x31313031) @ 0x1fffc0c0
ACPI: BOOT (v001 ASUS P4S533-X 0x42302e31 MSFT 0x31313031) @ 0x1fffc030
ACPI: MADT (v001 ASUS P4S533-X 0x42302e31 MSFT 0x31313031) @ 0x1fffc058
ACPI: DSDT (v001 ASUS P4S533-X 0x00001000 MSFT 0x0100000b) @ 0x00000000
Kernel command line: auto BOOT_IMAGE=2.4.22 ro
BOOT_FILE=/boot/vmlinuz-2.4.22-20.1.2024.2.36.nptl acpi=ht hdc=ide-scsi
root=LABEL=/ panic=60
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 2200.180 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 4390.91 BogoMIPS
Memory: 514312k/524272k available (1506k kernel code, 9572k reserved,
1110k data, 136k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Celeron(R) CPU 2.20GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030813
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xf1060, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1039/0962] at 00:02.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Asus Laptop ACPI Extras version 0.24a
Couldn't get the DSDT table header
Error registering Asus Laptop ACPI Extras Driver
-0420: *** Error: Could not allocate an object descriptor
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:pio
hda: WDC WD800JB-00ETA0, ATA DISK drive
blk: queue c040f3a0, I/O limit 4095Mb (mask 0xffffffff)
hdc: SONY CD-RW CRX225E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=9729/255/63,
UDMA(100)
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 >
ide: late registration of driver.
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 145k freed
next prev parent reply other threads:[~2003-10-15 22:22 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-10-02 20:14 ext3 crash with 2.4.22: Assertion failure in journal_forget_R10d91946() Andriy Rysin
2003-10-06 22:56 ` Marcelo Tosatti
2003-10-07 9:11 ` Stephen C. Tweedie
2003-10-07 22:18 ` Andriy Rysin
2003-10-15 22:26 ` Andriy Rysin [this message]
2003-10-17 18:28 ` 2.4.20, 2.4.22, 2.4.6-test7: system locks up completely when writing to floppy (2.2.20 is ok) - solution Andriy Rysin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3F8DC990.1040203@bcsii.net \
--to=arysin@bcsii.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.