All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrei Boros <andrei@srr.ro>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@lists.sourceforge.net
Subject: Re: snd-opti92x-ad1848
Date: Thu, 16 Oct 2003 09:48:02 +0300	[thread overview]
Message-ID: <3F8E3F22.1C9A8096@srr.ro> (raw)
In-Reply-To: s5h4qyakb24.wl@alsa2.suse.de

 
> unload all ALSA (and isapnp, pnp) modules before the following.
> 
> it must be the old isapnp module which wasn't unloaded.
> 
I checked that no sound related modules are loaded. 
I removed snd*.o from the /lib/modules...
I did make install, depmod -a

My /etc/modules.conf reads : 
alias char-major-116            snd
options snd                     cards_limit=2
alias snd-card-0                snd-cs46xx
alias snd-card-1                snd-opti92x-ad1848
options snd-opti-92x-ad1848     index=1 isapnp=1 id="Opti924" port=0x220
irq=5 dma1=0 fm_port=0x388 mpu_port=0x300 mpu_irq=7

(i also have a hercules fortissimo 2, the cs46xx which works fine)

So now I am sure no sound related modules are loaded.
modprobe snd-opti92x-ad1848 says 
/lib/modules/2.2.24/misc/snd-opti92x-ad1848.o: unresolved symbol
isapnp_resource_change_R09b965af
snd: Device or resource busy

I see that snd-isapnp is not loaded

Again, I unload _all_ modules.
I do modprobe snd-isapnp by hand
dmesg

isapnp: Card 'OPTi Audio 16'
isapnp: 1 Plug & Play card detected total

below is the contents of /proc/isapnp

gate:~# modprobe snd-opti92x-ad1848
/lib/modules/2.2.24/misc/snd-opti92x-ad1848.o: init_module: Device or
resource busy
snd: Device or resource busy

I take a look at the /proc/isapnp and I see that the device did not get
enabled

At this point I am out of ideas...






Card 1 'OPT0924:OPTi Audio 16' PnP version 1.0
  Logical device 0 'OPT0000:Pro Audio 16'
    Device is not active
    Active port 0x220
    Resources 0
      Priority preferred
      Port 0x220-0x240, align 0x1f, size 0x10, 10-bit address decoding
      Port 0x130-0x3f0, align 0x3, size 0x8, 10-bit address decoding
    Resources 1
      Priority acceptable
      Port 0x380-0x380, align 0xf, size 0xc, 10-bit address decoding
      IRQ 5,7,10 High-Edge
      DMA 0,1,3 8-bit compatible
      Alternate resources 1:1
        Priority acceptable
        Port 0x380-0x3f0, align 0xf, size 0xc, 10-bit address decoding
        IRQ 5,7,2/9,10,11 High-Edge
        DMA 0,1,3 8-bit compatible
        DMA 0,1,3 8-bit compatible
  Logical device 1 'OPT0001:Game Port'
    Compatible device PNPb02f
    Device is not active
    Resources 0
      Priority acceptable
      Port 0x201-0x201, align 0x0, size 0x1, 10-bit address decoding
      Alternate resources 0:1
        Priority acceptable
        Port 0x100-0x3f0, align 0xf, size 0x2, 10-bit address decoding
  Logical device 2 'OPT0002:MPU401'
    Device is not active
    Active port 0x300
    Active IRQ 9 [0x2]
    Resources 0
      Priority preferred
      Port 0x300-0x330, align 0xf, size 0x2, 10-bit address decoding
      IRQ 5,7,2/9,10 High-Edge
  Logical device 3 'OPT0003:CD'
    Compatible device PNP0600
    Device is active
    Active port 0x376,0x170
    Active IRQ 15 [0x2]
    Resources 0
      Priority preferred
      IRQ 15 High-Edge
    Resources 1
      Priority acceptable
      Port 0x376-0x376, align 0xf, size 0x2, 10-bit address decoding
      Port 0x170-0x170, align 0xf, size 0x8, 10-bit address decoding
      Alternate resources 1:1
        Priority acceptable
        Port 0x376-0x3f6, align 0xf, size 0x2, 10-bit address decoding
        Port 0x170-0x3f0, align 0xf, size 0x8, 10-bit address decoding
  Logical device 4 'OPT0004:Modem'
    Compatible device PNP0500
    Device is not active
    Resources 0
      Priority preferred
      IRQ 3,4,5,7,2/9,10,11 High-Edge
    Resources 1
      Priority acceptable
      Port 0x2e8-0x2f8, align 0xf, size 0x8, 10-bit address decoding
      Alternate resources 1:1
        Priority acceptable
        Port 0x3e8-0x3f8, align 0xf, size 0x8, 10-bit address decoding
      Alternate resources 1:2
        Priority acceptable
        Port 0x100-0x3f0, align 0xf, size 0x8, 10-bit address decoding
  Logical device 5 'OPT0005:OPT924'
    Device is not active
    Active port 0x30d
    Resources 0
      Priority preferred
      Port 0x30d-0x3ed, align 0x1f, size 0x9, 10-bit address decoding
    Resources 1
      Priority acceptable
      IRQ 5,10,11 High-Edge




-- 
ing. Andrei Boros
mailto:andrei@srr.ro / +40-21-303-1870
Centrul pt. Tehnologia Informatiei
Societatea Romana de Radiodifuziune


-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
SourceForge.net hosts over 70,000 Open Source Projects.
See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php

  reply	other threads:[~2003-10-16  6:48 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-10-15 10:07 snd-opti92x-ad1848 Andrei Boros
2003-10-15 10:16 ` snd-opti92x-ad1848 Takashi Iwai
     [not found]   ` <3F8D29F7.77623812@srr.ro>
2003-10-15 11:14     ` snd-opti92x-ad1848 Takashi Iwai
2003-10-16  6:48       ` Andrei Boros [this message]
2003-10-17 11:17         ` snd-opti92x-ad1848 Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3F8E3F22.1C9A8096@srr.ro \
    --to=andrei@srr.ro \
    --cc=alsa-devel@lists.sourceforge.net \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.