From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263451AbTJQMi7 (ORCPT ); Fri, 17 Oct 2003 08:38:59 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263452AbTJQMi6 (ORCPT ); Fri, 17 Oct 2003 08:38:58 -0400 Received: from parcelfarce.linux.theplanet.co.uk ([195.92.249.252]:61852 "EHLO www.linux.org.uk") by vger.kernel.org with ESMTP id S263451AbTJQMi5 (ORCPT ); Fri, 17 Oct 2003 08:38:57 -0400 Message-ID: <3F8FE2D1.6090400@pobox.com> Date: Fri, 17 Oct 2003 08:38:41 -0400 From: Jeff Garzik User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.4) Gecko/20030703 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Jurgen Kramer CC: linux-kernel@vger.kernel.org Subject: Re: [2.6.0-test3,6,7] IDE 'enhanced mode' problems References: <1066388412.1585.8.camel@paragon.slim> In-Reply-To: <1066388412.1585.8.camel@paragon.slim> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Jurgen Kramer wrote: > Hi, > > I have various systems running 2.6.0-test kernels without problems so I > thought lets try 2.6.0-test7 on my main system again...I had run test3 > without problems on this system but now all of a sudden it could not > boot 2.6.0-test3/6/7 normally. It would never pass through init > completely. It just stalled. > > The only thing I changed since the last time I ran 2.6.0 successfully > was that I removed the SATA drive (I am running this on a Asus P4C800). > In the BIOS the IDE settings where still set to 'Enhanced mode'. The 2.4 > kernel series doesn't seem to have a problem with it. I can't boot 2.6.0 > with this setting on. > > After changing the mode back to 'Compatible' I can run 2.6.0 properly > again. > > Is this a bug in the IDE ICH5 code? Are you running libata? Jeff