From: Hans Reiser <reiser@namesys.com>
To: lkml-031028@amos.mailshell.com, vs@thebsh.namesys.com
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.0test9 Reiserfs boot time "buffer layer error at fs/buffer.c:431"
Date: Tue, 28 Oct 2003 21:36:57 +0300 [thread overview]
Message-ID: <3F9EB749.6070105@namesys.com> (raw)
In-Reply-To: <20031028154920.1905.qmail@mailshell.com>
Vladimir, please look into this tomorrow.
Hans
lkml-031028@amos.mailshell.com wrote:
> [1.] One line summary of the problem:
>
> First time boot of 2.6.0test9 on a resierfs disk gives the error above.
> (buffer layer error at fs/buffer.c:431)
>
> [2.] Full description of the problem/report:
>
> Compile kernel 2.6.0 test 9 from the Debian "unstable" package using
> make-kpkg.
> I have a single-filesystem 76Gb ResierFs filesystem. (reports as
> "ReiserFS 3.6").
> I usually run a customized 2.4.22 with debian patches and the preemptive
> kernel patch.
> First time I boot the 2.6.0 kernel I got the message quoted above,
> The message repated twice in a row. Both instance seem itentical to
> me. The message with the stack trace is copied as-is from the
> output of dmesg below:
>
> buffer layer error at fs/buffer.c:431
> Call Trace:
> [<c014f2b5>] __find_get_block_slow+0x85/0x120
> [<c0150283>] __find_get_block+0x83/0xe0
> [<c015030b>] __getblk+0x2b/0x60
> [<c01503bf>] __bread+0x1f/0x40
> [<c01a2132>] read_super_block+0x82/0x210
> [<c01a2d95>] reiserfs_fill_super+0x555/0x5a0
> [<c01d69b7>] snprintf+0x27/0x30
> [<c017bce2>] disk_name+0x62/0xb0
> [<c0154bc5>] sb_set_blocksize+0x25/0x60
> [<c0154594>] get_sb_bdev+0x124/0x160
> [<c01a2e4f>] get_super_block+0x2f/0x60
> [<c01a2840>] reiserfs_fill_super+0x0/0x5a0
> [<c01547ff>] do_kern_mount+0x5f/0xe0
> [<c01695c8>] do_add_mount+0x78/0x150
> [<c01698b4>] do_mount+0x124/0x170
> [<c0169720>] copy_mount_options+0x80/0xf0
> [<c0169c6f>] sys_mount+0xbf/0x140
> [<c0462b9f>] do_mount_root+0x2f/0xa0
> [<c0462c64>] mount_block_root+0x54/0x120
> [<c0462d8e>] mount_root+0x5e/0x70
> [<c0462dbd>] prepare_namespace+0x1d/0xe0
> [<c01050d2>] init+0x32/0x160
> [<c01050a0>] init+0x0/0x160
> [<c01070c9>] kernel_thread_helper+0x5/0xc
>
> block=16, b_blocknr=64
> b_state=0x00000019, b_size=1024
> buffer layer error at fs/buffer.c:431
> Call Trace:
> [<c014f2b5>] __find_get_block_slow+0x85/0x120
> [<c01070c9>] kernel_thread_helper+0x5/0xc
> [<c010970c>] dump_stack+0x1c/0x20
> [<c0150283>] __find_get_block+0x83/0xe0
> [<c014fec3>] __getblk_slow+0x23/0xf0
> [<c015032f>] __getblk+0x4f/0x60
> [<c01503bf>] __bread+0x1f/0x40
> [<c01a2132>] read_super_block+0x82/0x210
> [<c01a2d95>] reiserfs_fill_super+0x555/0x5a0
> [<c01d69b7>] snprintf+0x27/0x30
> [<c017bce2>] disk_name+0x62/0xb0
> [<c0154bc5>] sb_set_blocksize+0x25/0x60
> [<c0154594>] get_sb_bdev+0x124/0x160
> [<c01a2e4f>] get_super_block+0x2f/0x60
> [<c01a2840>] reiserfs_fill_super+0x0/0x5a0
> [<c01547ff>] do_kern_mount+0x5f/0xe0
> [<c01695c8>] do_add_mount+0x78/0x150
> [<c01698b4>] do_mount+0x124/0x170
> [<c0169720>] copy_mount_options+0x80/0xf0
> [<c0169c6f>] sys_mount+0xbf/0x140
> [<c0462b9f>] do_mount_root+0x2f/0xa0
> [<c0462c64>] mount_block_root+0x54/0x120
> [<c0462d8e>] mount_root+0x5e/0x70
> [<c0462dbd>] prepare_namespace+0x1d/0xe0
> [<c01050d2>] init+0x32/0x160
> [<c01050a0>] init+0x0/0x160
> [<c01070c9>] kernel_thread_helper+0x5/0xc
>
> block=16, b_blocknr=64
> b_state=0x00000019, b_size=1024
>
> [3.] Keywords (i.e., modules, networking, kernel):
>
> ReiserFS, 2.6.0test9
>
> [4.] Kernel version (from /proc/version):
>
> Linux version 2.6.0-test9-adelaide (root@picton) (gcc version 3.3.2
> (Debian)) #1 Tue Oct 28 14:56:46 IST 2003
>
> [5.] Output of Oops.. message (if applicable) with symbolic information
> resolved (see Documentation/oops-tracing.txt)
>
> No "Oops" was generated.
>
> [6.] A small shell script or example program which triggers the
> problem (if possible)
>
> N/A. It happens at boot time.
>
> [7.] Environment
> [7.1.] Software (add the output of the ver_linux script here)
>
> Output of "sh scripts/ver_linux":
>
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
>
> Linux picton 2.6.0-test9-adelaide #1 Tue Oct 28 14:56:46 IST 2003 i686
> GNU/Linux
>
> Gnu C 3.3.2
> Gnu make 3.80
> binutils 2.14.90.0.6
> util-linux 2.12
> mount 2.12
> module-init-tools 0.9.15-pre2
> e2fsprogs 1.35-WIP
> Linux C Library 2.3.2
> Dynamic linker (ldd) 2.3.2
> Procps 3.1.14
> Net-tools 1.60
> Console-tools 0.2.3
> Sh-utils 5.0.91
> Modules Loaded radeon snd_seq_oss snd_seq_midi_event snd_seq
> snd_pcm_oss snd_mixer_oss snd_intel8x0 snd_ac97_codec snd_pcm
> snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device
> snd ipv6
>
> [7.2.] Processor information (from /proc/cpuinfo):
>
> output of "cat /proc/cpuinfo":
>
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 6
> model : 10
> model name : AMD Athlon(tm) XP 2500+
> stepping : 0
> cpu MHz : 1830.378
> cache size : 512 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
> mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
> bogomips : 3620.86
>
>
> [7.3.] Module information (from /proc/modules):
>
> output of "cat /proc/modules":
>
> radeon 113644 - - Live 0xe0aad000
> snd_seq_oss 36512 - - Live 0xe0a80000
> snd_seq_midi_event 7616 - - Live 0xe09d8000
> snd_seq 60880 - - Live 0xe0a70000
> snd_pcm_oss 61604 - - Live 0xe0a20000
> snd_mixer_oss 20608 - - Live 0xe09a4000
> snd_intel8x0 25700 - - Live 0xe09c2000
> snd_ac97_codec 54852 - - Live 0xe0a32000
> snd_pcm 108708 - - Live 0xe0a41000
> snd_timer 26564 - - Live 0xe09cc000
> snd_page_alloc 12036 - - Live 0xe0999000
> snd_mpu401_uart 7872 - - Live 0xe09a1000
> snd_rawmidi 26112 - - Live 0xe09ba000
> snd_seq_device 8200 - - Live 0xe099d000
> snd 54020 - - Live 0xe09ab000
> ipv6 250592 - - Live 0xe09e1000
>
> [7.4.] Loaded driver and hardware information (/proc/ioports,
> /proc/iomem)
>
> output of "cat /proc/ioports":
>
> 0000-001f : dma1
> 0020-0021 : pic1
> 0040-005f : timer
> 0060-006f : keyboard
> 0070-0077 : rtc
> 0080-008f : dma page reg
> 00a0-00a1 : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : ide1
> 01f0-01f7 : ide0
> 0376-0376 : ide1
> 03c0-03df : vga+
> 03f6-03f6 : ide0
> 0cf8-0cff : PCI conf1
> 1c00-1c07 : nForce2 SMBus
> 2000-2007 : nForce2 SMBus
> 9000-9fff : PCI Bus #01
> 9000-907f : 0000:01:07.0
> 9000-907f : 0000:01:07.0
> 9400-947f : 0000:01:08.0
> 9400-947f : 0000:01:08.0
> a000-afff : PCI Bus #02
> a000-a0ff : 0000:02:00.0
> b000-b0ff : 0000:00:06.0
> b400-b47f : 0000:00:06.0
> b400-b43f : NVidia nForce2 - Controller
> c000-c01f : 0000:00:01.1
> c400-c407 : 0000:00:04.0
> f000-f00f : 0000:00:09.0
> f000-f007 : ide0
> f008-f00f : ide1
>
> output of "cat /proc/iomem":
>
> 00000000-0009fbff : System RAM
> 0009fc00-0009ffff : reserved
> 000a0000-000bffff : Video RAM area
> 000c0000-000c7fff : Video ROM
> 000f0000-000fffff : System ROM
> 00100000-1ffeffff : System RAM
> 00100000-00357e42 : Kernel code
> 00357e43-0045f13f : Kernel data
> 1fff0000-1fff2fff : ACPI Non-volatile Storage
> 1fff3000-1fffffff : ACPI Tables
> d0000000-d3ffffff : 0000:00:00.0
> d4000000-dbffffff : PCI Bus #02
> d4000000-d7ffffff : 0000:02:00.0
> d8000000-dbffffff : 0000:02:00.1
> dc000000-ddffffff : PCI Bus #02
> dd000000-dd00ffff : 0000:02:00.0
> dd010000-dd01ffff : 0000:02:00.1
> de000000-dfffffff : PCI Bus #01
> df000000-df00007f : 0000:01:07.0
> df001000-df00107f : 0000:01:08.0
> e0000000-e0000fff : 0000:00:04.0
> e0001000-e0001fff : 0000:00:06.0
> e0001000-e00011ff : NVidia nForce2 - AC'97
> e0003000-e0003fff : 0000:00:02.0
> e0004000-e0004fff : 0000:00:02.1
> e0005000-e00050ff : 0000:00:02.2
> e0005000-e00050ff : ehci_hcd
> fec00000-fec00fff : reserved
> fee00000-fee00fff : reserved
> ffff0000-ffffffff : reserved
>
> [7.5.] PCI information ('lspci -vvv' as root)
>
> output of "lspci -vvv" as root:
>
> 00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different
> version?) (rev c1)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
> Capabilities: <available only to root>
>
> 00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1
> (rev c1)
> Subsystem: nVidia Corporation: Unknown device 0c17
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>
> 00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4
> (rev c1)
> Subsystem: nVidia Corporation: Unknown device 0c17
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>
> 00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3
> (rev c1)
> Subsystem: nVidia Corporation: Unknown device 0c17
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>
> 00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2
> (rev c1)
> Subsystem: nVidia Corporation: Unknown device 0c17
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>
> 00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5
> (rev c1)
> Subsystem: nVidia Corporation: Unknown device 0c17
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
>
> 00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
> Subsystem: Giga-byte Technology: Unknown device 0c11
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Capabilities: <available only to root>
>
> 00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
> Subsystem: Giga-byte Technology: Unknown device 0c11
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin A routed to IRQ 5
> Region 0: I/O ports at c000 [size=32]
> Capabilities: <available only to root>
>
> 00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev
> a4) (prog-if 10 [OHCI])
> Subsystem: Giga-byte Technology: Unknown device 5004
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at e0003000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: <available only to root>
>
> 00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev
> a4) (prog-if 10 [OHCI])
> Subsystem: Giga-byte Technology: Unknown device 5004
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin B routed to IRQ 9
> Region 0: Memory at e0004000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: <available only to root>
>
> 00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev
> a4) (prog-if 20 [EHCI])
> Subsystem: Giga-byte Technology: Unknown device 5004
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0 (750ns min, 250ns max)
> Interrupt: pin C routed to IRQ 5
> Region 0: Memory at e0005000 (32-bit, non-prefetchable)
> [size=256]
> Capabilities: <available only to root>
>
> 00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet
> Controller (rev a1)
> Subsystem: Giga-byte Technology: Unknown device e000
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0 (250ns min, 5000ns max)
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at c400 [size=8]
> Capabilities: <available only to root>
>
> 00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97
> Audio Controler (MCP) (rev a1)
> Subsystem: nVidia Corporation: Unknown device 4144
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0 (500ns min, 1250ns max)
> Interrupt: pin A routed to IRQ 11
> Region 0: I/O ports at b000 [size=256]
> Region 1: I/O ports at b400 [size=128]
> Region 2: Memory at e0001000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: <available only to root>
>
> 00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge
> (rev a3) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> I/O behind bridge: 00009000-00009fff
> Memory behind bridge: de000000-dfffffff
> Prefetchable memory behind bridge: fff00000-000fffff
> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>
> 00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
> (prog-if 8a [Master SecP PriP])
> Subsystem: Giga-byte Technology: Unknown device 5002
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0 (750ns min, 250ns max)
> Region 4: I/O ports at f000 [size=16]
> Capabilities: <available only to root>
>
> 00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if
> 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
> I/O behind bridge: 0000a000-0000afff
> Memory behind bridge: dc000000-ddffffff
> Prefetchable memory behind bridge: d4000000-dbffffff
> BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>
> 01:07.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX
> [Cyclone] (rev 28)
> Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 0x08
> (32 bytes)
> Interrupt: pin A routed to IRQ 9
> Region 0: I/O ports at 9000 [size=128]
> Region 1: Memory at df000000 (32-bit, non-prefetchable)
> [size=128]
> Expansion ROM at <unassigned> [disabled] [size=128K]
> Capabilities: <available only to root>
>
> 01:08.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX
> [Cyclone] (rev 30)
> Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 0x08
> (32 bytes)
> Interrupt: pin A routed to IRQ 5
> Region 0: I/O ports at 9400 [size=128]
> Region 1: Memory at df001000 (32-bit, non-prefetchable)
> [size=128]
> Expansion ROM at <unassigned> [disabled] [size=128K]
> Capabilities: <available only to root>
>
> 02:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 If
> [Radeon 9000] (rev 01) (prog-if 00 [VGA])
> Subsystem: Giga-byte Technology: Unknown device 4010
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping+ SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (2000ns min), Cache Line Size: 0x08 (32 bytes)
> Interrupt: pin A routed to IRQ 9
> Region 0: Memory at d4000000 (32-bit, prefetchable) [size=64M]
> Region 1: I/O ports at a000 [size=256]
> Region 2: Memory at dd000000 (32-bit, non-prefetchable)
> [size=64K]
> Expansion ROM at <unassigned> [disabled] [size=128K]
> Capabilities: <available only to root>
>
> 02:00.1 Display controller: ATI Technologies Inc Radeon R250 [Radeon
> 9000] (Secondary) (rev 01)
> Subsystem: Giga-byte Technology: Unknown device 4011
> Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping+ SERR- FastB2B-
> Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 32 (2000ns min), Cache Line Size: 0x08 (32 bytes)
> Region 0: Memory at d8000000 (32-bit, prefetchable) [disabled]
> [size=64M]
> Region 1: Memory at dd010000 (32-bit, non-prefetchable)
> [disabled] [size=64K]
> Capabilities: <available only to root>
>
>
>
> [7.6.] SCSI information (from /proc/scsi/scsi)
>
> Not relevant. It's a "pure IDE" system.
>
> [7.7.] Other information that might be relevant to the problem
> (please look in /proc and include all information that you
> think to be relevant):
>
> Content of the files under /proc/fs/reiserfs/hda2:
>
> ===============> bitmap <=================
> free_block: 2334
> scan_bitmap: wait bmap retry stolen
> journal_hintjournal_nohint
> 1167 0 1189 569
> 0 569 0
> ===============> journal <=================
> jp_journal_1st_block: 18
> jp_journal_dev: hda2[0]
> jp_journal_size: 8192
> jp_journal_trans_max: 1024
> jp_journal_magic: 595152260
> jp_journal_max_batch: 900
> jp_journal_max_commit_age: 30
> jp_journal_max_trans_age: 0
> j_1st_reserved_block: 18
> j_state: 0
> j_trans_id: 1129213
> j_mount_id: 73
> j_start: 7409
> j_len: 5
> j_len_alloc: 5
> j_wcount: 0
> j_bcount: 12
> j_first_unflushed_offset: 7197
> j_last_flush_trans_id: 1129202
> j_trans_start_time: 1067351133
> j_journal_list_index: 38
> j_list_bitmap_index: 0
> j_must_wait: 0
> j_next_full_flush: 0
> j_next_async_flush: 0
> j_cnode_used: 197
> j_cnode_free: 16187
>
> in_journal: 3015
> in_journal_bitmap: 13993
> in_journal_reusable: 2446
> lock_journal: 189919
> lock_journal_wait: 208
> journal_begin: 94959
> journal_relock_writers: 0
> journal_relock_wcount: 1
> mark_dirty: 143126
> mark_dirty_already: 132341
> mark_dirty_notjournal: 2352
> restore_prepared: 386223
> prepare: 163335
> prepare_retry: 32078
> ===============> oidmap <=================
> used: [ 1 .. 543d5 )
> free: [ 543d5 .. 543d9 )
> used: [ 543d9 .. 543da )
> free: [ 543da .. 54484 )
> used: [ 54484 .. 54485 )
> free: [ 54485 .. 544ee )
> used: [ 544ee .. 544ef )
> free: [ 544ef .. 54587 )
> used: [ 54587 .. 54588 )
> free: [ 54588 .. 54692 )
> used: [ 54692 .. 54693 )
> free: [ 54693 .. 54696 )
> used: [ 54696 .. 54697 )
> free: [ 54697 .. 546b2 )
> used: [ 546b2 .. 546b3 )
> free: [ 546b3 .. 546b4 )
> used: [ 546b4 .. 546b5 )
> free: [ 546b5 .. 54857 )
> used: [ 54857 .. 54858 )
> free: [ 54858 .. 5485f )
> used: [ 5485f .. 54860 )
> free: [ 54860 .. 54919 )
> used: [ 54919 .. 5491a )
> free: [ 5491a .. 5492e )
> used: [ 5492e .. 5492f )
> free: [ 5492f .. 549b1 )
> used: [ 549b1 .. 549b2 )
> free: [ 549b2 .. 549b3 )
> used: [ 549b3 .. 549b4 )
> free: [ 549b4 .. 549b5 )
> used: [ 549b5 .. 549b7 )
> free: [ 549b7 .. 549b8 )
> used: [ 549b8 .. 549b9 )
> free: [ 549b9 .. 549bb )
> used: [ 549bb .. 549bc )
> free: [ 549bc .. 549e6 )
> used: [ 549e6 .. 549e7 )
> free: [ 549e7 .. 549ed )
> used: [ 549ed .. 549ee )
> free: [ 549ee .. 549ef )
> used: [ 549ef .. 549f0 )
> free: [ 549f0 .. 549f2 )
> used: [ 549f2 .. 549f3 )
> free: [ 549f3 .. 549f5 )
> used: [ 549f5 .. 549f6 )
> free: [ 549f6 .. 549f8 )
> used: [ 549f8 .. 549f9 )
> free: [ 549f9 .. 549fb )
> used: [ 549fb .. 549fc )
> free: [ 549fc .. 549fe )
> used: [ 549fe .. 549ff )
> free: [ 549ff .. 54a01 )
> used: [ 54a01 .. 54a02 )
> free: [ 54a02 .. 54a04 )
> used: [ 54a04 .. 54a05 )
> free: [ 54a05 .. 54a0c )
> used: [ 54a0c .. 54a0d )
> free: [ 54a0d .. 54a0e )
> used: [ 54a0e .. 54a0f )
> free: [ 54a0f .. 54a1c )
> used: [ 54a1c .. 54a1d )
> free: [ 54a1d .. 54a1e )
> used: [ 54a1e .. 54a1f )
> free: [ 54a1f .. 54a21 )
> used: [ 54a21 .. 54a22 )
> free: [ 54a22 .. 54a24 )
> used: [ 54a24 .. 54a25 )
> free: [ 54a25 .. 54a27 )
> used: [ 54a27 .. 54a28 )
> free: [ 54a28 .. 54a2a )
> used: [ 54a2a .. 54a2b )
> free: [ 54a2b .. 54a42 )
> used: [ 54a42 .. 54a43 )
> free: [ 54a43 .. 54a53 )
> used: [ 54a53 .. 54a54 )
> free: [ 54a54 .. 54a59 )
> used: [ 54a59 .. 54a5a )
> free: [ 54a5a .. 54a5c )
> used: [ 54a5c .. 54a5d )
> free: [ 54a5d .. 54a5f )
> used: [ 54a5f .. 54a60 )
> free: [ 54a60 .. 54a62 )
> used: [ 54a62 .. 54a63 )
> free: [ 54a63 .. 54a65 )
> used: [ 54a65 .. 54a66 )
> free: [ 54a66 .. 54a68 )
> used: [ 54a68 .. 54a69 )
> free: [ 54a69 .. 54a7d )
> used: [ 54a7d .. 54a7e )
> free: [ 54a7e .. 54a80 )
> used: [ 54a80 .. 54a81 )
> free: [ 54a81 .. 54aa1 )
> used: [ 54aa1 .. 54aa2 )
> free: [ 54aa2 .. 54aa4 )
> used: [ 54aa4 .. 54aa5 )
> free: [ 54aa5 .. 54aa7 )
> used: [ 54aa7 .. 54aa8 )
> free: [ 54aa8 .. 54aaa )
> used: [ 54aaa .. 54aab )
> free: [ 54aab .. 54aad )
> used: [ 54aad .. 54aae )
> free: [ 54aae .. 54ab5 )
> used: [ 54ab5 .. 54ab6 )
> free: [ 54ab6 .. 54abc )
> used: [ 54abc .. 54abd )
> free: [ 54abd .. 54ac6 )
> used: [ 54ac6 .. 54ac7 )
> free: [ 54ac7 .. 54acd )
> used: [ 54acd .. 54ace )
> free: [ 54ace .. 54ad0 )
> used: [ 54ad0 .. 54ad1 )
> free: [ 54ad1 .. 54ad5 )
> used: [ 54ad5 .. 54ad6 )
> free: [ 54ad6 .. 54ade )
> used: [ 54ade .. 54adf )
> free: [ 54adf .. 54b15 )
> used: [ 54b15 .. 54b16 )
> free: [ 54b16 .. 54b17 )
> used: [ 54b17 .. 54b18 )
> free: [ 54b18 .. 54b1a )
> used: [ 54b1a .. 54b1b )
> free: [ 54b1b .. 54b1d )
> used: [ 54b1d .. 54b1e )
> free: [ 54b1e .. 54b20 )
> used: [ 54b20 .. 54b21 )
> free: [ 54b21 .. 54b23 )
> used: [ 54b23 .. 54b24 )
> free: [ 54b24 .. 54b26 )
> used: [ 54b26 .. 54b27 )
> free: [ 54b27 .. 54b29 )
> used: [ 54b29 .. 54b2a )
> free: [ 54b2a .. 54b2c )
> used: [ 54b2c .. 54b2d )
> free: [ 54b2d .. 54b2f )
> used: [ 54b2f .. 54b30 )
> free: [ 54b30 .. 54b32 )
> used: [ 54b32 .. 54b33 )
> free: [ 54b33 .. 54b35 )
> used: [ 54b35 .. 54b36 )
> free: [ 54b36 .. 54b38 )
> used: [ 54b38 .. 54b39 )
> free: [ 54b39 .. 54b3b )
> used: [ 54b3b .. 54b3c )
> free: [ 54b3c .. 54b41 )
> used: [ 54b41 .. 54b42 )
> free: [ 54b42 .. 54b44 )
> used: [ 54b44 .. 54b45 )
> free: [ 54b45 .. 54b47 )
> used: [ 54b47 .. 54b48 )
> free: [ 54b48 .. 54c58 )
> used: [ 54c58 .. 54c59 )
> free: [ 54c59 .. 54cca )
> used: [ 54cca .. 54ccb )
> free: [ 54ccb .. 54ccc )
> used: [ 54ccc .. 54ccd )
> free: [ 54ccd .. ffffffff )
> total: 156 [156/972] used: 345122 [exact]
> ===============> on-disk-super <=================
> block_count: 19763966
> free_blocks: 15854011
> root_block: 2289297
> blocksize: 4096
> oid_maxsize: 972
> oid_cursize: 156
> umount_state: 2
> magic: ReIsEr2Fs
> fs_state: 0
> hash: r5
> tree_height: 5
> bmap_nr: 604
> version: 2
> flags: 1[attrs_cleared]
> reserved_for_journal: 0
> ===============> per-level <=================
> level balances [sbk: reads fs_changed restarted] free
> space items can_remove lnum rnum lbytes
> rbytes get_neig get_neig_res need_l_neig need_r_neig
> 0 11340 188527 40 0
> 160895148 3115191 303 1725 1721
> 4455 5984 11343 3 125 117
> 1 148 188558 1 0
> 151553056 25614444 1 0 22
> -148 -148 148 0 0 1
> 2 0 188558 0 0
> 65905960 29183073 0 0 0
> 0 0 0 0 0 0
> 3 0 188558 0 0
> 761774320 188558 0 0 0
> 0 0 0 0 0 0
> 4 0 0 0 0
> 0 0 0 0 0 0
> 0 0 0 0 0
> ===============> super <=================
> state: REISERFS_VALID_FS
> mount options: BORDER SMALL_TAILS LOG
> gen. counter: 11340
> s_kmallocs: 0
> s_disk_reads: 0
> s_disk_writes: 0
> s_fix_nodes: 11344
> s_do_balance: 11340
> s_unneeded_left_neighbor: 0
> s_good_search_by_key_reada: 0
> s_bmaps: 0
> s_bmaps_without_search: 0
> s_direct2indirect: 35
> s_indirect2direct: 583
>
> max_hash_collisions: 0
> breads: 0
> bread_misses: 0
> search_by_key: 188566
> search_by_key_fs_changed: 41
> search_by_key_restarted: 0
> insert_item_restarted: 4
> paste_into_item_restarted: 0
> cut_from_item_restarted: 0
> delete_solid_item_restarted: 0
> delete_item_restarted: 0
> leaked_oid: 0
> leaves_removable: 0
> ===============> version <=================
> 3.6 format with checks off
>
>
>
>
> [X.] Other notes, patches, fixes, workarounds:
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe
> linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
>
--
Hans
next prev parent reply other threads:[~2003-10-28 18:37 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-10-28 15:49 2.6.0test9 Reiserfs boot time "buffer layer error at fs/buffer.c:431" lkml-031028
2003-10-28 18:36 ` Hans Reiser [this message]
2003-10-28 20:27 ` Oleg Drokin
2003-10-28 22:13 ` Andrew Morton
2003-10-28 22:15 ` Hans Reiser
2003-10-29 6:56 ` lkml-031028
2003-10-29 17:44 ` lkml-031028
2003-10-29 20:31 ` Andrew Morton
2003-10-29 21:49 ` Oleg Drokin
2003-10-29 22:19 ` Andrew Morton
2003-10-30 6:22 ` lkml-031028
2003-10-30 6:51 ` lkml-031028
2003-11-02 7:17 ` Herbert Xu
2003-11-02 7:33 ` Andrew Morton
2003-11-02 9:18 ` Oleg Drokin
2003-11-02 9:27 ` Herbert Xu
2003-11-02 9:40 ` Andrew Morton
2003-11-02 9:54 ` Herbert Xu
2003-11-02 11:54 ` Hans Reiser
2003-11-02 21:09 ` Herbert Xu
2003-11-03 10:20 ` Stephan von Krawczynski
2003-11-04 8:10 ` Hans Reiser
2003-11-04 21:03 ` Debian Kernels was: " Mike Fedyk
2003-11-04 9:54 ` Hans Reiser
2003-11-04 23:49 ` Stephan von Krawczynski
2003-11-05 0:05 ` Mike Fedyk
2003-11-16 13:05 ` Pavel Machek
2003-11-16 3:55 ` Hans Reiser
2003-11-16 14:15 ` Stephan von Krawczynski
2003-11-16 17:05 ` Pavel Machek
2003-11-16 17:27 ` Valdis.Kletnieks
2003-11-16 17:40 ` Stephan von Krawczynski
2003-11-16 18:38 ` Valdis.Kletnieks
2003-11-16 22:54 ` Stephan von Krawczynski
2003-11-16 17:30 ` Stephan von Krawczynski
2003-11-02 11:50 ` Hans Reiser
2003-11-02 20:33 ` Herbert Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3F9EB749.6070105@namesys.com \
--to=reiser@namesys.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lkml-031028@amos.mailshell.com \
--cc=vs@thebsh.namesys.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.