From: Peter Ryser <Peter.Ryser@xilinx.com>
To: hyding <nari_dhy@nari-china.com>
Cc: linuxppc-embed <linuxppc-embedded@lists.linuxppc.org>
Subject: Re: mount root on the ml300 board
Date: Wed, 29 Oct 2003 06:56:34 -0800 [thread overview]
Message-ID: <3F9FD522.5050106@xilinx.com> (raw)
In-Reply-To: <000701c39911$53d15f70$4844900a@hydingnb1>
Make sure to enable device file system (/devfs) support during kernel
configuration.
- Peter
hyding wrote:
>hi,
> I am debugging MontaVista linux pro3.0(kernel 2.4.28) on the ml300
>board. I use IBM MicroDrive 1GB card to configure the FPGA and act as
>root fs. But the boot stops and displays the following:
>...
>block: 128 slots per queue, batch=32
>Partition check:
> xsysacea: xsysacea1 xsysacea2 xsysacea3
>System ACE at 0xCF000000 mapped to 0xC900F000, irq=9, 1052352KB
>Kernel panic: I have no root and I want to scream
> <0>Rebooting in 180 seconds..
> There are 3 partitions in the CF card. The 1st is the fat12. The 2st
>is swap and the 3rd is the root. Kernel command line: console=ttyS0,9600
>root=/dev/sysace3 rw
> Did someone have the problem? Any hints will be appreciable.
>
>Thanks!
>
>
>
>
>
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
prev parent reply other threads:[~2003-10-29 14:56 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-10-23 2:56 mount root on the ml300 board hyding
2003-10-29 14:56 ` Peter Ryser [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3F9FD522.5050106@xilinx.com \
--to=peter.ryser@xilinx.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
--cc=nari_dhy@nari-china.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.