From: Carolyn and Eric Hathaway <hathaway@uplink.net>
To: alsa-devel@lists.sourceforge.net
Subject: aureal driver compile problem and patch
Date: Thu, 30 Oct 2003 22:12:57 -0500 [thread overview]
Message-ID: <3FA1D339.1020507@uplink.net> (raw)
(I already attempted to send this message to the list once before I
subscribed, but it never showed up in the archives. My apologies if
this ends up being a duplicate post. -ELH)
Hello,
I'm running RedHat 7.3 with all updates applied (including RedHat's
kernel version 2.4.20-20.7), with a generic OEM Aureal Vortex soundcard
(au8820 chip). On this system, I compiled ALSA driver 0.9.8 with the
following options:
[eric@duster alsa-driver-0.9.8]$ ./configure --with-isapnp=no
--with-sequencer=yes --with-oss=yes --with-cards=au8820
Performing a 'make; make install' ends with a message saying that there
are unresolved symbols in module snd-au8820.o. Digging a bit deeper, we
can find which symbols are unresolved:
[root@duster alsa-driver-0.9.8]# depmod -ae
depmod: *** Unresolved symbols in
/lib/modules/2.4.20-20.7/kernel/sound/pci/au88x0/snd-au8820.o
depmod: snd_mpu401_uart_new_Ra9ec76fd
depmod: snd_mpu401_uart_interrupt_Rff6d4aa3
depmod: snd_ac97_mixer_Rdd7e1738
By comparing the ALSA driver 0.9.8 source tree to the CVS repository at
the OpenVortex web site where the vortex driver was developed, I found
that there were some missing lines in several Makefiles in the ALSA
tree. In the OpenVortex CVS repository, these lines appear in Makefiles
under alsa-kernel/ but my understanding is that a driver shouldn't touch
these files until it is included in alsa-kernel/, so I added the lines
to the corresponding Makefiles outside of alsa-kernel/. I'm not 100%
sure if all the dependencies I've added are necessary--I just blindly
copied lines from the OpenVortex CVS. Someone with a better
understanding of the driver can double-check me.
After making these modifications (see patch below), the vortex driver
compiled with no unresolved symbols on my system, and is working great.
Thanks to ALSA and the OpenVortex guys for getting my soundcard
working without having to use the old binary-only Aureal driver.
-Eric Hathaway
--------------- BEGIN PATCH -----------------------
diff -ur alsa-driver-0.9.8/acore/Makefile
alsa-driver-0.9.8-patched/acore/Makefile
--- alsa-driver-0.9.8/acore/Makefile Tue Sep 16 06:14:03 2003
+++ alsa-driver-0.9.8-patched/acore/Makefile Tue Oct 21 22:21:12 2003
@@ -10,6 +10,9 @@
obj-$(CONFIG_SND_SERIALMIDI) += snd-rawmidi.o snd.o
obj-$(CONFIG_SND_MSND_PINNACLE) += snd-pcm.o snd-timer.o
snd-page-alloc.o snd.o snd-rawmidi.o
obj-$(CONFIG_SND_USB_US428) += snd-pcm.o snd-timer.o snd-page-alloc.o
snd.o snd-rawmidi.o snd-hwdep.o
+obj-$(CONFIG_SND_AU8810) += snd-pcm.o snd-timer.o snd-page-alloc.o
snd.o snd-rawmidi.o
+obj-$(CONFIG_SND_AU8820) += snd-pcm.o snd-timer.o snd-page-alloc.o
snd.o snd-rawmidi.o
+obj-$(CONFIG_SND_AU8830) += snd-pcm.o snd-timer.o snd-page-alloc.o
snd.o snd-rawmidi.o
export-objs := sound.o pcm.o pcm_lib.o rawmidi.o timer.o hwdep.o memalloc.o
diff -ur alsa-driver-0.9.8/acore/seq/Makefile
alsa-driver-0.9.8-patched/acore/seq/Makefile
--- alsa-driver-0.9.8/acore/seq/Makefile Mon Jun 2 09:03:38 2003
+++ alsa-driver-0.9.8-patched/acore/seq/Makefile Tue Oct 21
22:21:20 2003@@ -7,6 +7,9 @@
obj-$(CONFIG_SND_SERIALMIDI) += snd-seq-midi.o snd-seq.o
snd-seq-device.o snd-seq-midi-event.o
obj-$(CONFIG_SND_MSND_PINNACLE) += snd-seq-midi.o snd-seq.o
snd-seq-device.o snd-seq-midi-event.o
+obj-$(CONFIG_SND_AU8810) += snd-seq-midi.o snd-seq.o snd-seq-device.o
snd-seq-midi-event.o snd-seq-instr.o
+obj-$(CONFIG_SND_AU8820) += snd-seq-midi.o snd-seq.o snd-seq-device.o
snd-seq-midi-event.o snd-seq-instr.o
+obj-$(CONFIG_SND_AU8830) += snd-seq-midi.o snd-seq.o snd-seq-device.o
snd-seq-midi-event.o snd-seq-instr.o
export-objs := seq_device.o seq.o seq_instr.o seq_midi_emul.o \
seq_midi_event.o seq_virmidi.o
diff -ur alsa-driver-0.9.8/drivers/mpu401/Makefile
alsa-driver-0.9.8-patched/drivers/mpu401/Makefile
--- alsa-driver-0.9.8/drivers/mpu401/Makefile Mon Jun 2 09:03:39 2003
+++ alsa-driver-0.9.8-patched/drivers/mpu401/Makefile Tue Oct 21
22:21:36 2003@@ -3,6 +3,10 @@
include $(TOPDIR)/toplevel.config
include $(TOPDIR)/Makefile.conf
+obj-$(CONFIG_SND_AU8810) += snd-mpu401-uart.o
+obj-$(CONFIG_SND_AU8820) += snd-mpu401-uart.o
+obj-$(CONFIG_SND_AU8830) += snd-mpu401-uart.o
+
export-objs := mpu401_uart.o
TOPDIR = $(MAINSRCDIR)
diff -ur alsa-driver-0.9.8/pci/ac97/Makefile
alsa-driver-0.9.8-patched/pci/ac97/Makefile
--- alsa-driver-0.9.8/pci/ac97/Makefile Sun Feb 9 13:35:57 2003
+++ alsa-driver-0.9.8-patched/pci/ac97/Makefile Tue Oct 21 22:21:49 2003
@@ -3,6 +3,10 @@
include $(TOPDIR)/toplevel.config
include $(TOPDIR)/Makefile.conf
+obj-$(CONFIG_SND_AU8810) += snd-ac97-codec.o
+obj-$(CONFIG_SND_AU8820) += snd-ac97-codec.o
+obj-$(CONFIG_SND_AU8830) += snd-ac97-codec.o
+
export-objs := ac97_codec.o ak4531_codec.o
TOPDIR = $(MAINSRCDIR)
--------------- END PATCH -----------------------
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive? Does it
help you create better code? SHARE THE LOVE, and help us help
YOU! Click Here: http://sourceforge.net/donate/
next reply other threads:[~2003-10-31 3:12 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-10-31 3:12 Carolyn and Eric Hathaway [this message]
2003-10-31 11:39 ` aureal driver compile problem and patch Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3FA1D339.1020507@uplink.net \
--to=hathaway@uplink.net \
--cc=alsa-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.