From: Knut Petersen <Knut_Petersen@t-online.de>
To: "'linux-kernel@vger.kernel.org'" <linux-kernel@vger.kernel.org>
Subject: usb-storage broken for 2.6.0-test*
Date: Thu, 06 Nov 2003 09:21:58 +0100 [thread overview]
Message-ID: <3FAA04A6.60503@t-online.de> (raw)
Hi everybody,
Somewhere usb-storage is broken for all kernels of the 2.6.0-test*
series --- I tried test1, test2, and test9.
I really believe that this should be fixed for 2.6.0-final.
Hardware: Epia 5000, Sharkoon 128MB USB drive.
The SuSE 2.4.20 kernel works perfectly fine, I´m able to partition,
mount, read and write the drive with 2.4.20. Also
write protect is recognized correctly.
An USB Scanner works fine with both 2.4.20 and 2.6.0-test* kernels.
=======================================================
All kernel modules are loaded at boot time. Now I connect the usb drive:
=======================================================
Nov 6 08:23:46 linux kernel: hub 1-0:1.0: port 2, status 101, change 1,
12 Mb/s
Nov 6 08:23:46 linux kernel: hub 1-0:1.0: debounce: port 2: delay 100ms
stable 4 status 0x101
Nov 6 08:23:46 linux kernel: hub 1-0:1.0: new USB device on port 2,
assigned address 3
Nov 6 08:23:46 linux kernel: usb 1-2: new device strings: Mfr=0,
Product=1, SerialNumber=0
Nov 6 08:23:46 linux kernel: drivers/usb/core/message.c: USB device
number 3 default language ID 0x409
Nov 6 08:23:46 linux kernel: usb 1-2: Product: USB Mass Storage Device
Nov 6 08:23:46 linux kernel: drivers/usb/core/usb.c: usb_hotplug
Nov 6 08:23:46 linux kernel: usb 1-2: registering 1-2:1.0 (config #1,
interface 0)
Nov 6 08:23:46 linux kernel: drivers/usb/core/usb.c: usb_hotplug
Nov 6 08:23:46 linux kernel: usb-storage 1-2:1.0: usb_probe_interface
Nov 6 08:23:46 linux kernel: usb-storage 1-2:1.0: usb_probe_interface -
got id
Nov 6 08:23:46 linux kernel: usb-storage: USB Mass Storage device detected
Nov 6 08:23:46 linux kernel: usb-storage: act_altsetting is 0, id_index
is 78
Nov 6 08:23:46 linux kernel: usb-storage: -- associate_dev
Nov 6 08:23:46 linux kernel: usb-storage: Transport: Bulk
Nov 6 08:23:46 linux kernel: usb-storage: Protocol: Transparent SCSI
Nov 6 08:23:46 linux kernel: usb-storage: Endpoints: In: 0xe89b0220
Out: 0xe89b0234 Int: 0x00000000 (Period 0)
Nov 6 08:23:46 linux kernel: usb-storage: usb_stor_control_msg: rq=fe
rqtype=a1 value=0000 index=00 len=1
Nov 6 08:23:46 linux /sbin/hotplug[1632]: no runnable
/etc/hotplug/scsi_host.agent is installed
Nov 6 08:23:46 linux kernel: usb-storage: GetMaxLUN command result is
1, data is 0
Nov 6 08:23:46 linux kernel: usb-storage: *** thread sleeping.
Nov 6 08:23:46 linux kernel: scsi0 : SCSI emulation for USB Mass
Storage devices
Nov 6 08:23:46 linux kernel: usb-storage: queuecommand called
Nov 6 08:23:46 linux kernel: usb-storage: *** thread awakened.
Nov 6 08:23:46 linux kernel: usb-storage: Command INQUIRY (6 bytes)
Nov 6 08:23:46 linux kernel: usb-storage: 12 00 00 00 24 00
Nov 6 08:23:46 linux kernel: usb-storage: Bulk Command S 0x43425355 T
0x1 L 36 F 128 Trg 0 LUN 0 CL 6
Nov 6 08:23:46 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 31 bytes
Nov 6 08:23:46 linux kernel: usb-storage: Status code 0; transferred 31/31
Nov 6 08:23:46 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:46 linux kernel: usb-storage: Bulk command transfer result=0
Nov 6 08:23:46 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 36 bytes
Nov 6 08:23:46 linux kernel: usb-storage: Status code 0; transferred 36/36
Nov 6 08:23:46 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:46 linux kernel: usb-storage: Bulk data transfer result 0x0
Nov 6 08:23:46 linux kernel: usb-storage: Attempting to get CSW...
Nov 6 08:23:46 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 13 bytes
Nov 6 08:23:46 linux kernel: usb-storage: Status code 0; transferred 13/13
Nov 6 08:23:46 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:46 linux /sbin/hotplug[1640]: no runnable
/etc/hotplug/scsi.agent is installed
Nov 6 08:23:46 linux kernel: usb-storage: Bulk status result = 0
Nov 6 08:23:46 linux kernel: usb-storage: Bulk Status S 0x53425355 T
0x1 R 0 Stat 0x0
Nov 6 08:23:46 linux kernel: usb-storage: scsi cmd done, result=0x0
Nov 6 08:23:46 linux kernel: usb-storage: *** thread sleeping.
Nov 6 08:23:46 linux kernel: Vendor: SHARKOON Model: USB
DRIVE Rev: 1.1
Nov 6 08:23:46 linux kernel: Type:
Direct-Access ANSI SCSI revision: 02
Nov 6 08:23:46 linux kernel: usb-storage: queuecommand called
Nov 6 08:23:46 linux kernel: usb-storage: *** thread awakened.
Nov 6 08:23:46 linux kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Nov 6 08:23:46 linux kernel: usb-storage: 00 00 00 00 00 00
Nov 6 08:23:46 linux kernel: usb-storage: Bulk Command S 0x43425355 T
0x2 L 0 F 0 Trg 0 LUN 0 CL 6
Nov 6 08:23:46 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 31 bytes
Nov 6 08:23:46 linux kernel: usb-storage: Status code 0; transferred 31/31
Nov 6 08:23:46 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:46 linux kernel: usb-storage: Bulk command transfer result=0
Nov 6 08:23:46 linux kernel: usb-storage: Attempting to get CSW...
Nov 6 08:23:46 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 13 bytes
Nov 6 08:23:46 linux kernel: usb-storage: Status code 0; transferred 13/13
Nov 6 08:23:46 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:46 linux kernel: usb-storage: Bulk status result = 0
Nov 6 08:23:46 linux kernel: usb-storage: Bulk Status S 0x53425355 T
0x2 R 0 Stat 0x0
Nov 6 08:23:46 linux kernel: usb-storage: scsi cmd done, result=0x0
Nov 6 08:23:46 linux kernel: usb-storage: *** thread sleeping.
Nov 6 08:23:46 linux kernel: usb-storage: queuecommand called
Nov 6 08:23:46 linux kernel: usb-storage: *** thread awakened.
Nov 6 08:23:46 linux kernel: usb-storage: Command READ_CAPACITY (10 bytes)
Nov 6 08:23:46 linux kernel: usb-storage: 25 00 00 00 00 00 00 00 00 00
Nov 6 08:23:46 linux kernel: usb-storage: Bulk Command S 0x43425355 T
0x3 L 8 F 128 Trg 0 LUN 0 CL 10
Nov 6 08:23:46 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 31 bytes
Nov 6 08:23:46 linux kernel: usb-storage: Status code 0; transferred 31/31
Nov 6 08:23:46 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:46 linux kernel: usb-storage: Bulk command transfer result=0
Nov 6 08:23:46 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 8 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 8/8
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk data transfer result 0x0
Nov 6 08:23:47 linux kernel: usb-storage: Attempting to get CSW...
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 13 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 13/13
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk status result = 0
Nov 6 08:23:47 linux kernel: usb-storage: Bulk Status S 0x53425355 T
0x3 R 0 Stat 0x0
Nov 6 08:23:47 linux kernel: usb-storage: scsi cmd done, result=0x0
Nov 6 08:23:47 linux kernel: usb-storage: *** thread sleeping.
Nov 6 08:23:47 linux kernel: SCSI device sda: 256000 512-byte hdwr
sectors (131 MB)
Nov 6 08:23:47 linux kernel: usb-storage: queuecommand called
Nov 6 08:23:47 linux kernel: usb-storage: *** thread awakened.
Nov 6 08:23:47 linux kernel: usb-storage: Command MODE_SENSE_10 (10 bytes)
Nov 6 08:23:47 linux kernel: usb-storage: 5a 00 3f 00 00 00 00 00 08 00
Nov 6 08:23:47 linux kernel: usb-storage: Bulk Command S 0x43425355 T
0x4 L 8 F 128 Trg 0 LUN 0 CL 10
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 31 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 31/31
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk command transfer result=0
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 8 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 8/8
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk data transfer result 0x0
Nov 6 08:23:47 linux kernel: usb-storage: Attempting to get CSW...
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 13 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 13/13
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk status result = 0
Nov 6 08:23:47 linux kernel: usb-storage: Bulk Status S 0x53425355 T
0x4 R 8 Stat 0x1
Nov 6 08:23:47 linux kernel: usb-storage: -- transport indicates
command failure
Nov 6 08:23:47 linux kernel: usb-storage: Issuing auto-REQUEST_SENSE
Nov 6 08:23:47 linux kernel: usb-storage: Bulk Command S 0x43425355 T
0x80000004 L 18 F 128 Trg 0 LUN 0 CL 6
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 31 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 31/31
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk command transfer result=0
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 18 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 18/18
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk data transfer result 0x0
Nov 6 08:23:47 linux kernel: usb-storage: Attempting to get CSW...
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 13 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 13/13
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk status result = 0
Nov 6 08:23:47 linux kernel: usb-storage: Bulk Status S 0x53425355 T
0x80000004 R 0 Stat 0x0
Nov 6 08:23:47 linux kernel: usb-storage: -- Result from auto-sense is 0
Nov 6 08:23:47 linux kernel: usb-storage: -- code: 0x70, key: 0x5, ASC:
0x20, ASCQ: 0x0
Nov 6 08:23:47 linux kernel: usb-storage: Illegal Request: Invalid
command operation code
Nov 6 08:23:47 linux kernel: usb-storage: scsi cmd done, result=0x2
Nov 6 08:23:47 linux kernel: usb-storage: *** thread sleeping.
Nov 6 08:23:47 linux kernel: usb-storage: queuecommand called
Nov 6 08:23:47 linux kernel: usb-storage: *** thread awakened.
Nov 6 08:23:47 linux kernel: usb-storage: Command MODE_SENSE_10 (10 bytes)
Nov 6 08:23:47 linux kernel: usb-storage: 5a 00 00 00 00 00 00 00 08 00
Nov 6 08:23:47 linux kernel: usb-storage: Bulk Command S 0x43425355 T
0x5 L 8 F 128 Trg 0 LUN 0 CL 10
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 31 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 31/31
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk command transfer result=0
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 8 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 8/8
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk data transfer result 0x0
Nov 6 08:23:47 linux kernel: usb-storage: Attempting to get CSW...
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 13 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 13/13
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk status result = 0
Nov 6 08:23:47 linux kernel: usb-storage: Bulk Status S 0x53425355 T
0x5 R 8 Stat 0x1
Nov 6 08:23:47 linux kernel: usb-storage: -- transport indicates
command failure
Nov 6 08:23:47 linux kernel: usb-storage: Issuing auto-REQUEST_SENSE
Nov 6 08:23:47 linux kernel: usb-storage: Bulk Command S 0x43425355 T
0x80000005 L 18 F 128 Trg 0 LUN 0 CL 6
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 31 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 31/31
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk command transfer result=0
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 18 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 18/18
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk data transfer result 0x0
Nov 6 08:23:47 linux kernel: usb-storage: Attempting to get CSW...
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 13 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 13/13
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk status result = 0
Nov 6 08:23:47 linux kernel: usb-storage: Bulk Status S 0x53425355 T
0x80000005 R 0 Stat 0x0
Nov 6 08:23:47 linux kernel: usb-storage: -- Result from auto-sense is 0
Nov 6 08:23:47 linux kernel: usb-storage: -- code: 0x70, key: 0x5, ASC:
0x20, ASCQ: 0x0
Nov 6 08:23:47 linux kernel: usb-storage: Illegal Request: Invalid
command operation code
Nov 6 08:23:47 linux kernel: usb-storage: scsi cmd done, result=0x2
Nov 6 08:23:47 linux kernel: usb-storage: *** thread sleeping.
Nov 6 08:23:47 linux kernel: usb-storage: queuecommand called
Nov 6 08:23:47 linux kernel: usb-storage: *** thread awakened.
Nov 6 08:23:47 linux kernel: usb-storage: Command MODE_SENSE_10 (10 bytes)
Nov 6 08:23:47 linux kernel: usb-storage: 5a 00 3f 00 00 00 00 00 ff 00
Nov 6 08:23:47 linux kernel: usb-storage: Bulk Command S 0x43425355 T
0x6 L 255 F 128 Trg 0 LUN 0 CL 10
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 31 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 31/31
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk command transfer result=0
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 255 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 39/255
Nov 6 08:23:47 linux kernel: usb-storage: -- short transfer
Nov 6 08:23:47 linux kernel: usb-storage: Bulk data transfer result 0x1
Nov 6 08:23:47 linux kernel: usb-storage: Attempting to get CSW...
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 13 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 13/13
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk status result = 0
Nov 6 08:23:47 linux kernel: usb-storage: Bulk Status S 0x53425355 T
0x6 R 255 Stat 0x1
Nov 6 08:23:47 linux kernel: usb-storage: -- transport indicates
command failure
Nov 6 08:23:47 linux kernel: usb-storage: Issuing auto-REQUEST_SENSE
Nov 6 08:23:47 linux kernel: usb-storage: Bulk Command S 0x43425355 T
0x80000006 L 18 F 128 Trg 0 LUN 0 CL 6
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 31 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 31/31
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk command transfer result=0
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 18 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 18/18
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux /sbin/hotplug[1654]: no runnable
/etc/hotplug/block.agent is installed
Nov 6 08:23:47 linux kernel: usb-storage: Bulk data transfer result 0x0
Nov 6 08:23:47 linux kernel: usb-storage: Attempting to get CSW...
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 13 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 13/13
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk status result = 0
Nov 6 08:23:47 linux kernel: usb-storage: Bulk Status S 0x53425355 T
0x80000006 R 0 Stat 0x0
Nov 6 08:23:47 linux kernel: usb-storage: -- Result from auto-sense is 0
Nov 6 08:23:47 linux kernel: usb-storage: -- code: 0x70, key: 0x5, ASC:
0x20, ASCQ: 0x0
Nov 6 08:23:47 linux kernel: usb-storage: Illegal Request: Invalid
command operation code
Nov 6 08:23:47 linux kernel: usb-storage: scsi cmd done, result=0x2
Nov 6 08:23:47 linux kernel: usb-storage: *** thread sleeping.
BTW: test WP works for 2.4.20!
Nov 6 08:23:47 linux kernel: sda: test WP failed, assume Write Enabled
Nov 6 08:23:47 linux kernel: sda: assuming drive cache: write through
Nov 6 08:23:47 linux kernel: usb-storage: queuecommand called
Nov 6 08:23:47 linux kernel: usb-storage: *** thread awakened.
Nov 6 08:23:47 linux kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Nov 6 08:23:47 linux kernel: usb-storage: 00 00 00 00 00 00
Nov 6 08:23:47 linux kernel: usb-storage: Bulk Command S 0x43425355 T
0x7 L 0 F 0 Trg 0 LUN 0 CL 6
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 31 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 31/31
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk command transfer result=0
Nov 6 08:23:47 linux kernel: usb-storage: Attempting to get CSW...
Nov 6 08:23:47 linux /sbin/hotplug[1661]: no runnable
/etc/hotplug/scsi_device.agent is installed
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 13 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 13/13
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk status result = 0
Nov 6 08:23:47 linux kernel: usb-storage: Bulk Status S 0x53425355 T
0x7 R 0 Stat 0x0
Nov 6 08:23:47 linux kernel: usb-storage: scsi cmd done, result=0x0
Nov 6 08:23:47 linux kernel: usb-storage: *** thread sleeping.
Nov 6 08:23:47 linux kernel: usb-storage: queuecommand called
Nov 6 08:23:47 linux kernel: usb-storage: *** thread awakened.
Nov 6 08:23:47 linux kernel: usb-storage: Command ALLOW_MEDIUM_REMOVAL
(6 bytes)
Nov 6 08:23:47 linux kernel: usb-storage: 1e 00 00 00 01 00
Nov 6 08:23:47 linux kernel: usb-storage: Bulk Command S 0x43425355 T
0x8 L 0 F 0 Trg 0 LUN 0 CL 6
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 31 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 31/31
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk command transfer result=0
Nov 6 08:23:47 linux kernel: usb-storage: Attempting to get CSW...
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 13 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 13/13
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk status result = 0
Nov 6 08:23:47 linux kernel: usb-storage: Bulk Status S 0x53425355 T
0x8 R 0 Stat 0x1
Nov 6 08:23:47 linux kernel: usb-storage: -- transport indicates
command failure
Nov 6 08:23:47 linux kernel: usb-storage: Issuing auto-REQUEST_SENSE
Nov 6 08:23:47 linux kernel: usb-storage: Bulk Command S 0x43425355 T
0x80000008 L 18 F 128 Trg 0 LUN 0 CL 6
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 31 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 31/31
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk command transfer result=0
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 18 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 18/18
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk data transfer result 0x0
Nov 6 08:23:47 linux kernel: usb-storage: Attempting to get CSW...
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 13 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 13/13
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk status result = 0
Nov 6 08:23:47 linux kernel: usb-storage: Bulk Status S 0x53425355 T
0x80000008 R 0 Stat 0x0
Nov 6 08:23:47 linux kernel: usb-storage: -- Result from auto-sense is 0
Nov 6 08:23:47 linux kernel: usb-storage: -- code: 0x70, key: 0x5, ASC:
0x24, ASCQ: 0x0
Nov 6 08:23:47 linux kernel: usb-storage: Illegal Request: Invalid
field in cdb
Nov 6 08:23:47 linux kernel: usb-storage: scsi cmd done, result=0x2
Nov 6 08:23:47 linux kernel: usb-storage: *** thread sleeping.
Nov 6 08:23:47 linux kernel: sda:<7>usb-storage: queuecommand called
Nov 6 08:23:47 linux kernel: usb-storage: *** thread awakened.
Nov 6 08:23:47 linux kernel: usb-storage: Command READ_10 (10 bytes)
Nov 6 08:23:47 linux kernel: usb-storage: 28 00 00 00 00 00 00 00 08 00
Nov 6 08:23:47 linux kernel: usb-storage: Bulk Command S 0x43425355 T
0x9 L 4096 F 128 Trg 0 LUN 0 CL 10
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 31 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 31/31
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk command transfer result=0
Nov 6 08:23:47 linux kernel: usb-storage:
usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred
4096/4096
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk data transfer result 0x0
Nov 6 08:23:47 linux kernel: usb-storage: Attempting to get CSW...
Nov 6 08:23:47 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 13 bytes
Nov 6 08:23:47 linux kernel: usb-storage: Status code 0; transferred 13/13
Nov 6 08:23:47 linux kernel: usb-storage: -- transfer complete
Nov 6 08:23:47 linux kernel: usb-storage: Bulk status result = 0
Nov 6 08:23:47 linux kernel: usb-storage: Bulk Status S 0x53425355 T
0x9 R 0 Stat 0x0
Nov 6 08:23:47 linux kernel: usb-storage: scsi cmd done, result=0x0
Nov 6 08:23:47 linux kernel: usb-storage: *** thread sleeping.
Nov 6 08:23:47 linux kernel: sda1
Nov 6 08:23:47 linux kernel: Attached scsi removable disk sda at scsi0,
channel 0, id 0, lun 0
Nov 6 08:23:47 linux kernel: usb-storage: queuecommand called
Nov 6 08:23:47 linux kernel: usb-storage: *** thread awakened.
Nov 6 08:23:47 linux kernel: usb-storage: Bad target number (1:0)
Nov 6 08:23:47 linux kernel: usb-storage: scsi cmd done, result=0x40000
Nov 6 08:23:47 linux kernel: usb-storage: *** thread sleeping.
Nov 6 08:23:47 linux kernel: usb-storage: queuecommand called
Nov 6 08:23:47 linux kernel: usb-storage: *** thread awakened.
Nov 6 08:23:47 linux kernel: usb-storage: Bad target number (2:0)
Nov 6 08:23:47 linux kernel: usb-storage: scsi cmd done, result=0x40000
Nov 6 08:23:47 linux kernel: usb-storage: *** thread sleeping.
Nov 6 08:23:47 linux kernel: usb-storage: queuecommand called
Nov 6 08:23:47 linux kernel: usb-storage: *** thread awakened.
Nov 6 08:23:47 linux kernel: usb-storage: Bad target number (3:0)
Nov 6 08:23:47 linux kernel: usb-storage: scsi cmd done, result=0x40000
Nov 6 08:23:47 linux kernel: usb-storage: *** thread sleeping.
Nov 6 08:23:47 linux kernel: usb-storage: queuecommand called
Nov 6 08:23:47 linux kernel: usb-storage: *** thread awakened.
Nov 6 08:23:47 linux kernel: usb-storage: Bad target number (4:0)
Nov 6 08:23:47 linux kernel: usb-storage: scsi cmd done, result=0x40000
Nov 6 08:23:47 linux kernel: usb-storage: *** thread sleeping.
Nov 6 08:23:47 linux kernel: usb-storage: queuecommand called
Nov 6 08:23:47 linux kernel: usb-storage: *** thread awakened.
Nov 6 08:23:47 linux kernel: usb-storage: Bad target number (5:0)
Nov 6 08:23:47 linux kernel: usb-storage: scsi cmd done, result=0x40000
Nov 6 08:23:47 linux kernel: usb-storage: *** thread sleeping.
Nov 6 08:23:47 linux kernel: usb-storage: queuecommand called
Nov 6 08:23:47 linux kernel: usb-storage: *** thread awakened.
Nov 6 08:23:47 linux kernel: usb-storage: Bad target number (6:0)
Nov 6 08:23:47 linux kernel: usb-storage: scsi cmd done, result=0x40000
Nov 6 08:23:47 linux kernel: usb-storage: *** thread sleeping.
Nov 6 08:23:47 linux kernel: usb-storage: queuecommand called
Nov 6 08:23:47 linux kernel: usb-storage: *** thread awakened.
Nov 6 08:23:47 linux kernel: usb-storage: Bad target number (7:0)
Nov 6 08:23:47 linux kernel: usb-storage: scsi cmd done, result=0x40000
Nov 6 08:23:47 linux kernel: usb-storage: *** thread sleeping.
Nov 6 08:23:47 linux kernel: WARNING: USB Mass Storage data integrity
not assured
Nov 6 08:23:47 linux kernel: USB Mass Storage device found at 3
Nov 6 08:23:47 linux /sbin/hotplug[1647]: no runnable
/etc/hotplug/block.agent is installed
Nov 6 08:23:49 linux /etc/hotplug/usb.agent[1668]: Setting up USB
devices switched of. Exiting usb.agent ...
Nov 6 08:23:52 linux /etc/hotplug/usb.agent[1676]: Setting up USB
devices switched of. Exiting usb.agent ...
========================
Now I try to mount /dev/sda1:
========================
Nov 6 08:25:00 linux kernel: usb-storage: queuecommand called
Nov 6 08:25:00 linux kernel: usb-storage: *** thread awakened.
Nov 6 08:25:00 linux kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Nov 6 08:25:00 linux kernel: usb-storage: 00 00 00 00 00 00
Nov 6 08:25:00 linux kernel: usb-storage: Bulk Command S 0x43425355 T
0x11 L 0 F 0 Trg 0 LUN 0 CL 6
Nov 6 08:25:00 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 31 bytes
Nov 6 08:25:00 linux kernel: usb-storage: Status code 0; transferred 31/31
Nov 6 08:25:00 linux kernel: usb-storage: -- transfer complete
Nov 6 08:25:00 linux kernel: usb-storage: Bulk command transfer result=0
Nov 6 08:25:00 linux kernel: usb-storage: Attempting to get CSW...
Nov 6 08:25:00 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 13 bytes
Nov 6 08:25:00 linux kernel: usb-storage: Status code 0; transferred 13/13
Nov 6 08:25:00 linux kernel: usb-storage: -- transfer complete
Nov 6 08:25:00 linux kernel: usb-storage: Bulk status result = 0
Nov 6 08:25:00 linux kernel: usb-storage: Bulk Status S 0x53425355 T
0x11 R 0 Stat 0x0
Nov 6 08:25:00 linux kernel: usb-storage: scsi cmd done, result=0x0
Nov 6 08:25:00 linux kernel: usb-storage: *** thread sleeping.
Nov 6 08:25:00 linux kernel: usb-storage: queuecommand called
Nov 6 08:25:00 linux kernel: usb-storage: *** thread awakened.
Nov 6 08:25:00 linux kernel: usb-storage: Command READ_10 (10 bytes)
Nov 6 08:25:00 linux kernel: usb-storage: 28 00 00 00 00 20 00 04 00 00
Nov 6 08:25:00 linux kernel: usb-storage: Bulk Command S 0x43425355 T
0x12 L 524288 F 128 Trg 0 LUN 0 CL 10
Nov 6 08:25:00 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 31 bytes
Nov 6 08:25:00 linux kernel: usb-storage: Status code 0; transferred 31/31
Nov 6 08:25:00 linux kernel: usb-storage: -- transfer complete
Nov 6 08:25:00 linux kernel: usb-storage: Bulk command transfer result=0
Nov 6 08:25:00 linux kernel: usb-storage:
usb_stor_bulk_transfer_sglist: xfer 524288 bytes, 128 entries
Nov 6 08:25:00 linux kernel: usb-storage: Status code -121; transferred
114688/524288
Nov 6 08:25:00 linux kernel: usb-storage: -- short read transfer
Nov 6 08:25:00 linux kernel: usb-storage: Bulk data transfer result 0x1
Nov 6 08:25:00 linux kernel: usb-storage: Attempting to get CSW...
Nov 6 08:25:00 linux kernel: usb-storage: usb_stor_bulk_transfer_buf:
xfer 13 bytes
Nov 6 08:25:30 linux kernel: usb-storage: command_abort called
Nov 6 08:25:30 linux kernel: usb-storage: usb_stor_stop_transport called
Nov 6 08:25:30 linux kernel: usb-storage: -- cancelling URB
Nov 6 08:25:30 linux kernel: usb-storage: Status code -104; transferred
0/13
Nov 6 08:25:30 linux kernel: usb-storage: -- transfer cancelled
Nov 6 08:25:30 linux kernel: usb-storage: Bulk status result = 4
Nov 6 08:25:30 linux kernel: usb-storage: -- command was aborted
Nov 6 08:25:30 linux kernel: usb-storage: usb_stor_Bulk_reset called
Nov 6 08:25:30 linux kernel: usb-storage: usb_stor_control_msg: rq=ff
rqtype=21 value=0000 index=00 len=0
Nov 6 08:25:36 linux kernel: usb-storage: Soft reset: clearing bulk-in
endpoint halt
Nov 6 08:25:36 linux kernel: usb-storage: usb_stor_control_msg: rq=01
rqtype=02 value=0000 index=81 len=0
Nov 6 08:25:36 linux kernel: usb-storage: usb_stor_clear_halt: result = 0
Nov 6 08:25:36 linux kernel: usb-storage: Soft reset: clearing bulk-out
endpoint halt
Nov 6 08:25:36 linux kernel: usb-storage: usb_stor_control_msg: rq=01
rqtype=02 value=0000 index=02 len=0
Nov 6 08:25:36 linux kernel: usb-storage: usb_stor_clear_halt: result = 0
Nov 6 08:25:36 linux kernel: usb-storage: Soft reset done
Nov 6 08:25:36 linux kernel: usb-storage: scsi command aborted
Nov 6 08:25:36 linux kernel: usb-storage: *** thread sleeping.
Nov 6 08:25:36 linux kernel: usb-storage: queuecommand called
.....
This could go one for hours ... top shows 0% idle and 99.x % iowait.
cu,
Knut
reply other threads:[~2003-11-06 8:31 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3FAA04A6.60503@t-online.de \
--to=knut_petersen@t-online.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.