From mboxrd@z Thu Jan 1 00:00:00 1970 From: Benouille Subject: Re: hdsp update Date: Fri, 07 Nov 2003 12:18:53 +0100 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <3FAB7F9D.6090606@ifrance.com> References: <3FAA408F.50201@undata.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <3FAA408F.50201@undata.org> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Hi list, hi thomas, A big thank you for all your great job on the rme hdsp. I've installed the alsa cvs dated from the november 5th on 2 pc: one with a hdsp multiface, one with a hdsp 9652. Since this update, I can't access anymore the level of the channels with amixer, and alsamixer reponds 'no mixer element found' on both system. Is it a normal behaviour? Then, when I boot, the hdsp multiface is still locked and I need to call 'hdsploader' about 3 or 5 times (I have the 'post-install snd-hdsp /usr/local/bin/hdsploader' in modules.conf) then, I have to reboot, and run hdspmixer to unmute the channels. I woul like to know if there is a way to start the system with the card properly running and all channels unmuted. Maybe you could show us your modules.conf? Thanks again, Benoit Le 06/11/2003 13:37, Thomas Charbonnel a écrit : > Hi, > > The attached patch fixes matrix mixer and metering problems spotted by > Pentti Ala-Vannesluoma for H9632 cards and gcc 2.9x compile errors > reported by Martin Langer. > > Thomas > > > ------------------------------------------------------------------------ > > --- hdsp.c.cvs 2003-11-01 09:06:45.000000000 +0100 > +++ hdsp.c 2003-11-06 13:06:28.000000000 +0100 > @@ -454,6 +454,7 @@ > ... ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/