From mboxrd@z Thu Jan 1 00:00:00 1970 From: janl@langfeldt.net (Nicolai Langfeldt) Date: Thu, 19 May 2005 06:24:25 +0000 Subject: lmsensors on Abit IC7-G Message-Id: <3FB92482.2070306@langfeldt.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org Hi, On my Abit IC7-G there is a ICH5 chipset. Once sensors-detect has been updated with the 24d3 device id it generates a nice lm-sensors configuration. Unfortunately there are no real temperature readings=20 (there should be quite a few according to BIOS) or any fan-speeds (2 to=20 4 should be right). I also wonder about the corectness of the voltage=20 readings. In the BIOS display they are all 10% or less off nominal. Is there anything I can test to see if I get more or more correct readings? # lspci -n -v -s 00:1f.3 00:1f.3 Class 0c05: 8086:24d3 (rev 02) Subsystem: 147b:1014 Flags: medium devsel, IRQ 17 I/O ports at 0500 [size2] # lspci -v -s 00:1f.3 00:1f.3 SMBus: Intel Corp. 82801EB SMBus (rev 02) Subsystem: ABIT Computer Corp.: Unknown device 1014 Flags: medium devsel, IRQ 17 I/O ports at 0500 [size2] # cat /etc/sysconfig/lm_sensors .. # Generated by sensors-detect on Mon Nov 17 20:01:45 2003 MODULE_0=3Di2c-i801 MODULE_1=3Dlm80 MODULE_2=EEprom # sensors lm80-i2c-0-2e Adapter: SMBus I801 adapter at 0500 Algorithm: Non-I2C SMBus adapter +5V: +6.71 V (min =3D +6.71 V, max =3D +6.71 V) VTT: +2.55 V (min =3D +2.55 V, max =3D +2.55 V) +3.3V: +4.43 V (min =3D +4.43 V, max =3D +4.43 V) +Vcore: +3.76 V (min =3D +3.76 V, max =3D +3.76 V) ALARM +12V: +16.10 V (min =3D +16.10 V, max =3D +16.10 V) -12V: -16.11 V (min =3D -16.11 V, max =3D -16.11 V) -5V: -6.70 V (min =3D -6.70 V, max =3D -6.70 V) fan1: 0 RPM (min =3D 0 RPM, div =3D 1) fan2: 0 RPM (min =3D 0 RPM, div =3D 1) temp: -1.00 ?C (hot:limit =3D -1?C, hysteresis =3D -1?C) (os: limit =3D -1?C, hysteresis =3D -1?C) alarms: Board temperature input (LM75) ALARM eeprom-i2c-0-50 Adapter: SMBus I801 adapter at 0500 Algorithm: Non-I2C SMBus adapter Memory type: DDR SDRAM DIMM SPD SDRAM Size (MB): 512 eeprom-i2c-0-52 Adapter: SMBus I801 adapter at 0500 Algorithm: Non-I2C SMBus adapter Memory type: DDR SDRAM DIMM SPD SDRAM Size (MB): 512 Thanks and regards, Nicolai